Search NASA⌕ Search

Engineering topics

Deeney, Christopher

Publications and source records attributed to Deeney, Christopher.

Benchmarking the Lab Fellows Program

PNNL’s Fellows are recognized as having attained the institution’s highest level of scientific and technical achievement. These individuals are internationally recognized by their peers and have demonstrated innovation and leadership throughout their careers. PNNL’s Independent Oversight (IO) office led an assessment to benchmark how other research and development organizations identify, advance, recognize, and utilize their Fellows.

99 GENERAL AND MISCELLANEOUS↗

Evaluation of nested wire array dynamics with mixed wire array Z pinches.

A series of experiments at the Z Accelerator was performed with 40mm and 50mm diameter nested wire arrays to investigate the interaction of the arrays and assess radiative characteristics. These arrays were fielded with one array as Al:Mg (either the inner or the outer array) and the other array as Ni-clad Ti (the outer or inner array, with respect to location of the Al:Mg). In all the arrays, the mass and radius ratio of the outer:inner was 2:1. The wire number ratio was also 2:1 in some cases, but the Al:Mg wire number was increased in some loads. This presentation will focus on analysis of the emitted radiation (in multiple photon energy bins) and measured plasma conditions (as inferred from x-ray spectra). A discussion on what these results indicate about nested array dynamics will also be presented.

43 PARTICLE ACCELERATORS↗

What can spectroscopy and imaging of multi-planar wire arrays reveal about Z-pinch radiation physics?

The planar wire array research on Zebra at UNR that started in 2005 continues experiments with new types of planar loads with results for consideration and comprehensive analysis [see, for example, Kantsyrev et al, HEDP 5, 115 (2009)]. The detailed studies of radiative properties of such loads are important and spectroscopy and imaging constitute a very valuable and informative diagnostic tool. The set of theoretical codes is implemented which provides non-LTE kinetics, wire ablation dynamic, and MHD modeling. This talk is based on the results of new recent experiments with planar wire arrays on Zebra at UNR. We start with results on radiative properties of a uniform single planar wire array (SPWA) from alloyed Al wires and move to combined triple planar wire arrays (TPWA) made from two materials, Cu and Al. Such combined TPWA includes three planar wire rows that are parallel to each other and made of either Cu or Al alloyed wires. Three different configurations (Al/Cu/Al, Cu/Al/Cu, and Cu/Cu/Al) are considered and compared with each other, and with the results from SPWA of the same materials. X-ray time-gated and time integrated pinhole images and spectra are analyzed together with bolometer, PCD, and XRD measurements, and optical images. Emphasis is made on the radiative properties and temporal and spatial evolution of plasma parameters of such two-component plasmas. The opacity effects are considered and the important question of what causes K-shell Al lines to be optically thin in combined TPWAs is addressed. In conclusion, the new findings from studying multi-planar wire array implosions are summarized and their input to Z-pinch radiation physics is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mass accretion and nested array dynamics from Ni-Clad Ti-Al wire array Z pinches.

Analysis of 50 mm diameter wire arrays at the Z Accelerator has shown experimentally the accretion of mass in a stagnating z pinch and provided insight into details of the radiating plasma species and plasma conditions. This analysis focused on nested wire arrays with a 2:1 (outeninner) mass, radius, and wire number ratio where Al wires were fielded on the outer array and Ni-clad Ti wires were fielded on the inner array.In this presentation, we will present analysis of data from other mixed Al/Ni-clad Ti configurations to further evaluate nested wire array dynamics and mass accretion. These additional configurations include the opposite configuration to that described above (Ni-clad Ti wires on the outer array, with Al wires on the inner array) as well as higher wire number Al configurations fielded to vary the interaction of the two arrays. These same variations were also assessed for a smaller diameter nested array configuration (40 mm). Variations in the emitted radiation and plasma conditions will be presented, along with a discussion of what the results indicate about the nested array dynamics. Additional evidence for mass accretion will also be presented.

43 PARTICLE ACCELERATORS↗

Implosion dynamics and K-shell x-ray generation in large diameter stainless steel wire array Z pinches with various nesting configurations

Nested stainless steel wire array variations were investigated on the 20 MA Z machine [R. B. Spielman et al., Phys. Plasmas 5, 2105 (1998)]. In order to reach experimentally observed electron temperatures near 3.8 keV and excite the K shell, these {approx}6.7 keV photon energy x-ray sources must be of large initial diameter (45-80 mm) which poses a concern for magnetic Rayleigh-Taylor instability growth. We discuss the implosion dynamics in these large diameter wire arrays, including an analysis of the ablation phase indicating that the prefill material is snowplowed at large radius. Nested array configurations with various mass and radius ratios are compared for instability mitigation and K-shell scaling. Degradation of the K-shell x-ray power and yield was observed for shots that did not have simultaneous implosion of the outer and inner wire arrays. Shots that were designed per this constraint exhibited K-shell yield scaling consistent with the model of J. W. Thornhill et al. [IEEE Trans. Plasma Sci. 34, 2377 (2006)] which had been benchmarked to single array results. This lends confidence to K-shell yield predictions using this model for future shots on the refurbished Z machine. Initial results employing a triple nested wire array to stabilize the large diameter implosion are also reported.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗