Engineering topics
Publications and source records attributed to Delvaille, J. P..
During an observation of NGC 5128 (Cen A) by the rotating modulation collimator on board the SAS-3 X-ray observatory in early June 1975, data were obtained which suggest the presence of an extended source with about 3 arcmin FWHM surrounding an extremely compact object located at the radio/IR nucleus. The point component exhibited a 25% increase in intensity over a period of 2 to 5 hours.
The discovery of X-ray QSO MR2251-178 at a distance of 410 Mpc is reported. The observations are based on signals (2-11 keV) from NRAO's Very Large Array (VLA) radio telescope and from two independent rotating modulation collimators (RMC). Coordinates are given and positional identification with X-ray source 2A2251-179 is made. Examination of POSS plates and redshift has given rise to speculation that MR2251-178 could actually be a Seyfert galaxy; but its high luminosity would tend to support the contention that it is, indeed, a QSO.
The complex X-ray and radio structures of the cluster of galaxies Abell 478 have been observed in the 2-11-keV energy band by the rotating modulation collimators on the SAS-3 X-ray observatory and at 1415 MHz by the Westerbork synthesis radio telescope. The X-ray data imply an extended source (X-ray luminosity of the order of 10 to the 45th power erg/s) and are consistent with the presence of a coincident pointlike source X-ray luminosity of the order of 10 to the 45th power erg/s. The X-ray source position is also coincident with a cD radio galaxy at the core of the cluster.
X-rays from a region containing the nucleus of the type 1 Seyfert galaxy 3C 120 have been detected using the rotating modulation collimator on board the SAS-3 X-ray observatory. The error circle has a 95% error radius of 1.0 arcmin. The measured X-ray (2-10 keV) flux is 5.4 by 10 to the -11th power erg/s per sq cm. The corresponding luminosity is 2.3 by 10 to the 44th power erg/s for the source at 200 Mpc. Synchrotron-Compton and hot plasma models are discussed.
The manufacture and properties of a grating intended for extrasolar X-ray studies are described. The manufacturing process uses a split laser beam exposing an interference pattern on the photoresist-coated glass plated with a nickel parting layer. The grating, supporting structure, and mounting frame are electrodeposited on the nickel parting layer, and the final product is lifted from the glass substrate by selective etching of the nickel. A model was derived which relates the number of counts received in a given order m as a function of photon wavenumber. A 4-deg beam line was used to measure the efficiencies of gold transmission gratings for diffraction of X-rays in the range of 45 to 275 eV. The experimental results are in good agreement with model calculations.
X-rays in the 2-6 keV band were detected from the Algol system using the rotating modulation collimator system on SAS-3 during an observation in October 1975. The measured X-ray flux is 3.8 x 10 to the -11th ergs/sq cm/s/keV. No positive detection was made in the 6-11 keV band. The data are consistent with either a power-law spectrum with photon spectral index not less than 2.5 or a thermal bremsstrahlung spectrum with a temperature not greater than 3 x 10 to the 7th K.
Preliminary results from the Bragg crystal spectrometer on the ANS satellite are given. No significant Si XIII and Si XIV narrow line emission has been detected from Cygnus X-1, -2, or -3.
Two broad spectral features which may be easily overlooked or misinterpreted in the discussion of X-ray spectra induced by fast atomic collisions are reported. Calculations based on relatively simple models are in good agreement with the data.
Explore the source record for details and available documents.