Engineering topics

Deng, Yida

Publications and source records attributed to Deng, Yida.

5 records

DOE OSTI2024

Insight of Synthesis of Single Crystal Ni-Rich LiNi 1-x-y Co x Mn y O 2 Cathodes

Single-crystal Ni-rich LiNi 1-x-y Co x Mn y O 2 (NCM) cathodes have garnered widespread attention in the lithium-ion battery community due to their unique advantages in mechanical performance and their ability to minimize interfacial electrochemical side reactions. The synthesis of single-crystal materials with monodisperse and appropriate size, minimal lattice defects, and highly ordered structures is the key for high-performance batteries. However, achieving this goal poses challenges due to the lack of in-depth understanding regarding specific experimental parameters and the solid reaction mechanism during the synthesis process. Further, in this review, the aim is to provide an in-depth analysis of the critical process parameters involved in the synthesis and their impact on crystal morphology, structure, and electrochemical performance. Consequently, the first section focuses on the effect of the precursor morphology, lithium salt, atmosphere, and sintering procedure. In the second section, the study delves into an in-depth discussion of the solid reaction and crystal growth mechanism. Lastly, it is concluded by highlighting the prospects and challenges associated with the synthesis and application of single-crystal Ni-rich NCM cathodes.

25 ENERGY STORAGE↗

DOE OSTI2021

Modulating the Surface Ligand Orientation for Stabilized Anionic Redox in Li‐Rich Oxide Cathodes

Abstract Anionic redox chemistry is emerging as a key concept in the development of high‐energy lithium‐ion batteries, as it enables a nearly doubled charge storage capacity, aiding the development of high‐capacity batteries. However, the anionic reactivity is frequently irreversible from charge to discharge, leading to rapid decay of the capacity and voltage of batteries over long‐term cycling. Although the possibility of controlling the anionic redox reactions by tuning the geometric and electronic structures has recently been proposed, the implementation of this strategy is still a critical challenge. Herein, a strategy is proposed to improve the anionic redox reversibility of a model anionic redox active cathode material, Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 , by tuning the surface ligand geometry via the growth of a lattice‐compatible spinel LiCoO 2 coating layer on the particle surface. Detailed local structure and first principles investigations reveal that the shape and orientation of the octahedral layer in the host lattice are modified. Accordingly, a two‐band oxygen redox behavior is triggered in the ligand‐orientation‐regulated Li‐rich cathode, leading to enhanced reversibility, and thus, remarkably improved capacity and voltage retention over cycling. This study highlights the importance of controllable ligand orientation, carving a new path for the development and design of Li‐rich cathodes in the future.

Liu, Yanchen↗

DOE OSTI2020

Mass production of high-performance single atomic FeNC electrocatalysts via sequenced ultrasonic atomization and pyrolysis process

Mass production of highly efficient, durable, and inexpensive single atomic catalysts is currently the major challenge associated with the oxygen reduction reaction (ORR) for fuel cells. In this study, we develop a general strategy that uses a simple ultrasonic atomization coupling with pyrolysis and calcination process to synthesize single atomic FeNC catalysts (FeNC SACs) at large scale. The microstructure characterizations confirm that the active centers root in the single atomic Fe sites chelating to the four-fold pyridinic N atoms. The identified specific Fe active sites with the variable valence states facilitate the transfer of electrons, endowing the FeNC SACs with excellent electrochemical ORR activity. The FeNC SACs were used as cathode catalysts in a homemade Zn-air battery, giving an open-circuit voltage (OCV) of 1.43 V, which is substantially higher than that of commercial Pt/C catalysts. This study provides a simple approach to the synthesis of single atomic catalysts at large scale.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Understanding the Gap between Academic Research and Industrial Requirements in Rechargeable Zinc-Ion Batteries

Rechargeable Zn-ion batteries (RZIBs) are considered to be promising energy storage systems for large-scale applications owing to their relatively high energy densities and inherently low costs, environmental benignity, as well as safety. With increasing interest and effort being devoted to this field, RZIBs are being tremendously advanced and are very likely to be commercialized in the near future. However, some challenges remain that need to be addressed. Moreover, reported results are quite often overstated through artificial exaggeration and cannot be translated to industrial applications as they were obtained under ideal testing conditions. Therefore, in this perspective, here we discuss key parameters that need to be carefully considered when translating laboratory-developed RZIBs into commercial reality. We also present a critical mini-review on RZIBs and devote effort to issues that are overlooked in academic research. We believe that this perspective provides new or seldom-discussed insight for future work and bridges the gap between academia and industry.

25 ENERGY STORAGE↗

DOE OSTI2020

Identifying Dense NiSe 2 /CoSe 2 Heterointerfaces Coupled with Surface High-Valence Bimetallic Sites for Synergistically Enhanced Oxygen Electrocatalysis

Constructing heterostructures with abundant interfaces is essential for integrating the multiple functionalities in single entities. Herein, the synthesis of NiSe 2 /CoSe 2 heterostructures with different interfacial densities via an innovative strategy of successive ion injection is reported. The resulting hybrid electrocatalyst with dense heterointerfaces exhibits superior electrocatalytic properties in an alkaline electrolyte, superior to other benchmarks and precious metal catalysts. Advanced synchrotron techniques, post structural characterizations, and density functional theory (DFT) simulations reveal that the introduction of atomic-level interfaces can lower the oxidation overpotential of bimetallic Ni and Co active sites (whereas Ni$^{2+}$ can be more easily activated than Co$^{2+}$) and induce the electronic interaction between the core selenides and surface in situ generated oxides/hydroxides, which play a critical role in synergistically reducing energetic barriers and accelerating reaction kinetics for catalyzing the oxygen evolution. Hence, the heterointerface structure facilitates the catalytic performance enhancement via increasing the intrinsic reactivity of metallic atoms and enhancing the synergistic effect between the inner selenides and surface oxidation species. This work not only complements the understanding on the origins of the activity of electrocatalysts based on metal selenides, but also sheds light on further surface and interfacial engineering of advanced hybrid materials.

36 MATERIALS SCIENCE↗