Search NASA⌕ Search

Engineering topics

Densmore, John M.

Publications and source records attributed to Densmore, John M..

Multifunctional reactive inks, methods of use and manufacture thereof

In one embodiment, a method includes dispersing a plurality of particles in solution to form a dispersion and adding a stabilizing agent to the dispersion in an amount sufficient to cause the dispersion to exhibit one or more predetermined rheological properties. The particles in the dispersion are configured to complete a self-propagating and/or self-sustaining reaction upon initiation thereof. In another embodiment, a method includes depositing a material on a substrate. The material includes: a plurality of particles configured to complete a self-propagating and/or self-sustaining reaction upon initiation thereof, a solvent system, and one or more stabilizing agents.

Sullivan, Kyle T.↗

Multifunctional reactive inks, methods of use and manufacture thereof

In one embodiment, a material includes a plurality of particles, a solvent system and one or more stabilizing agents; the particles are configured to complete a self-propagating and/or self-sustaining reaction upon initiation thereof. In another embodiment, a method includes dispersing a plurality of particles in solution to form a dispersion and adding a stabilizing agent to the dispersion in an amount sufficient to cause the dispersion to exhibit one or more predetermined rheological properties; again, the particles in the dispersion are configured to complete a self-propagating and/or self-sustaining reaction upon initiation thereof. In still another embodiment, a method includes depositing a material on a substrate; the material includes a plurality of particles configured to complete a self-propagating and/or self-sustaining reaction upon initiation thereof, a solvent system and one or more stabilizing agents.

Sullivan, Kyle↗

In situ observations of reacting Al/Fe 2 O 3 thermite: Relating dynamic particle size to macroscopic burn time

Time-resolved x-ray imaging is used to capture high-resolution images of the Al/Fe 2 O 3 thermite reaction as it proceeds in an extended burn tube. The observed thermite reaction products are generally large, multi-phase composite particles. Image processing algorithms are developed to extract a continuous record of composite particle size as a function of time and distance from the ignition point. Small particles are observed immediately after ignition, followed by a rapid increase in particle size and a gradual decline toward late times. Correlating the dynamic particle size with visible light emission from the reaction, we propose a two-stage mechanism where the combination of early ignition and delayed expansion causes the material closest to the ignition point to undergo substantial coalescence before it begins moving down the tube. We also identify two mechanisms that may contribute to particle size refinement at late times, both based on the collapse of large gas bubbles that are observed preferentially in particles at earlier times. A new approach to extracting burn times from luminous intensity data is explored, and we find that a more nuanced analysis of burn time and luminous intensity may help to improve reactivity assessments when data from in situ studies is unavailable.

36 MATERIALS SCIENCE↗

Invited Article: Quantitative imaging of explosions with high-speed cameras

Here, the techniques presented in this paper allow for mapping of temperature, pressure, chemical species, and energy deposition during and following detonations of explosives, using high speed cameras as the main diagnostic tool. Additionally, this work provides measurement in the explosive near to far-field (0-500 charge diameters) of surface temperatures, peak air-shock pressures, some chemical species signatures, shock energy deposition, and air shock formation.

47 OTHER INSTRUMENTATION↗

Quantifying Dynamic Processes in Reactive Materials: An Extended Burn Tube Test

Abstract A common method for measuring the reactivity of rapidly deflagrating materials has been to loosely pack a desired mixture into an approx. 10 cm long×3 mm diameter acrylic tube, ignite the material on one end, and report the observed self‐propagating flame velocity through the material. While this method can yield qualitative information, linking this to quantitative intrinsic properties, such as particle burn time, has remained challenging. In this work, we significantly redesign the traditional burn tube experiment. Between 25 and 250 mg of nanocomposite aluminum/copper oxide (Al/CuO) thermite is loosely packed into the capped end of a 1.8 m long tube, and the remainder of the tube is left unfilled. The material is ignited using a hot wire, resulting in a steadily‐propagating luminous front, which extends part, or all, of the way down the length of the tube. We suggest the behavior is a result of “reactive entrainment”, which occurs when the reaction time scale becomes longer than the characteristic momentum relaxation time scale. When this criterion is met, and when there are significant pressure gradients present or produced during the reaction, material will be entrained by the gases before and/or during the reaction; a behavior very different from conventional thermites, which use larger particle sizes. The effect of sample mass and tube diameter on propagation velocity is investigated, and we find a linear scaling with mass and a power law scaling with tube radius ( r −1.3 ) between 1.56 and 4.76 mm radii. For several conditions, we observe the reaction complete; defined by the distance where the propagation velocity decreases to a fixed fraction of its steady value. The ratio of quench distance to propagation velocity was found to approach a constant value of 3.29±0.70 ms, which we suggest is the burn time of the Material. For the range of masses studied in this work, the burn time was found to be independent of mass, implying that it is an intrinsic particle burn time. We expect other quantitative information can be deduced from this experiment, so long as the chosen sample mass and tube dimensions allow one to observe the full extent of reaction.

Sullivan, Kyle T.↗

Expansion Behavior and Temperature Mapping of Thermites in Burn Tubes as a Function of Fill Length [Thermal Imaging of Thermite Flame Propagation]

The reaction of loosely-packed aluminum/copper oxide (Al/CuO) thermites in a 12 cm long acrylic burn tube was investigated as a function of the fill length from 2 to 10 cm. The velocity of the luminous front was measured both in the filled and unfilled region, and approached 1000 m s-1 in the unfilled region, independent of the fill length. This value is approximately a factor of two higher than the fastest velocity measured in the filled region, 606 m s-1, for the 10 cm filled tube. The velocity increase in the unfilled region ist likely due to the increased open porosity, which can support faster flow velocities for a given pressure gradient relative to that in the porous material. A high-speed color imaging pyrometer was used to thermally map the evolution of the flame in both regions. Near the luminous front in the filled section, the temperature was observed to rapidly increase in a 1–2 cm zone to a maximum value near 3200 K, and an average value near 3000 K was sustained in the wake well after the front passes and exits the tube. In partially-filled tubes, even for the lowest fill length of 2 cm, the intermediate and/or product species could be seen to expand forward and completely fill the tube with a sustained temperature of ca. 3000 K. This temperature did not decay during the expansion, suggesting that the material continues to react as it expands. The results raise several questions about what a burn tube experiment is really measuring; such as what fraction of the material has burned when the luminous front passes and what role open cracks or microstructures play in promoting transport. Lastly, these questions are critically important towards developing a predictive capability for confined, loosely packed deflagrations.

36 MATERIALS SCIENCE↗

High-speed two-camera imaging pyrometer for mapping fireball temperatures

A high-speed imaging pyrometer was developed to investigate the behavior of flames and explosive events. The instrument consists of two monochrome high-speed Phantom v7.3 m cameras made by Vision Research Inc. arranged so that one lens assembly collects light for both cameras. The cameras are filtered at 700 or 900 nm with a 10 nm bandpass. The high irradiance produced by blackbody emission combined with variable shutter time and f-stop produces properly exposed images. The wavelengths were chosen with the expected temperatures in mind, and also to avoid any molecular or atomic gas phase emission. Here, the temperatures measured using this pyrometer of exploded TNT charges are presented.

42 ENGINEERING↗