Search NASA⌕ Search

Engineering topics

Devanathan, Ram

Publications and source records attributed to Devanathan, Ram.

At least 55 records · Page 3

Data Science Techniques, Assumptions, and Challenges in Alloy Clustering and Property Prediction

Data analytics methods have been increasingly applied to understanding materials chemistry, processing due to the manufacturing approach, and uni-axial and cyclic property relationships in the highly complex space of alloy design. There are several benefits to applying data analytics to this space, including the ability to manage non-linearities in the responses of the alloy attributes and the resulting mechanical properties. However, key difficulties in applying and understanding the results of data analytics include the often lack of reported assumptions and data processing steps necessary to improve interpretation and reproducibility in derived results. In this work, the methods used to generate clustering and correlation analyses for experimental 9% Cr ferritic-martensitic steel data were investigated and the resulting implications for mechanical property predictions were assessed. This work uses principal component analysis, partitioning around medoids, t-SNE, and k-means clustering to investigate trends in composition, processing and microstructure information with creep and tensile properties, building on work done previously using a smaller version of the same dataset. The initial assumptions, preprocessing steps and methods are investigated and outlined in order to depict the fine level of detail required to convey the steps taken to process data and produce analytical results. Here, the variations in the resulting analyses are explored due to the influence of new and more varied data.

36 MATERIALS SCIENCE↗

Formation of multicomponent alloy particles in doped ceria under I 2+ ion irradiation and thermal annealing

Multicomponent alloys resembling the e-phase particles in nuclear fuel have the potential to immobilize 99 Tc in a stable waste form. Formation of such multicomponent alloys under extreme conditions is studied in a non-activated model system: CeO 2 doped with 2 wt% Mo, 1.5 wt% Ru, 0.75 wt% Pd, 0.5 wt% Re and 0.25 wt% Rh. The doped CeO 2 films were irradiated with I 2+ ions (610°C, 10 16 and 5×10 16 I 2+ /cm 2 ). For selected samples post-irradiation heat treatment was conducted (900°C, 1100°C). Analytical TEM revealed the formation of 5-20 nm precipitates containing Pd, Mo, and Re sometimes associated with cavities. Iodine was found to segregate to grain boundaries and cracks. After heat treatment at 1100°C, the CeO 2 matrix had recrystallized. Precipitates containing Pd, Mo, Re, and Ru were observed near the interface with the polycrystalline YSZ substrate. It follows that Pd is the most mobile element, followed by Mo and Re. Finally, while irradiation promotes precipitation, high-temperature effects are more significant.

36 MATERIALS SCIENCE↗

A new non-diffusional gas bubble production route in used nuclear fuel: Implications for fission gas release, cladding corrosion, and next generation fuel design

The relationship between noble metal phase particles and fission gas bubble production in used nuclear fuel is described. The majority of Te atoms within noble metal phase undergo radioactive decay to form stable Xe within a few hours after particle formation. This results in the production of clusters of Xe atoms contained within the solid metal matrix exhibiting an equivalent gas bubble pressure approaching 1 GPa. These high pressure bubbles are stabilized by the UO2 within the bulk of the fuel. However, when these bubbles form near the fuel / cladding interface, in combination with local and temporal damage caused by fission recoil, they are capable of overcoming the fracture strength of the UO2 and rupturing catastrophically. The force of the resulting bubble rupture is sufficient to eject noble metal phase particles several microns into the cladding. This proposed mechanism explains the observance of noble metal phase in cladding and is consistent with a host of morphological features found near the fuel / cladding interface.

Schwantes, Jon M.↗

Data-driven glass/ceramic science research: Insights from the glass and ceramic and data science/informatics communities

Data-driven science and technology have helped achieve meaningful results in areas such as materials/drug discovery and health care, but efforts to apply high-end data science algorithms to the areas of glass and ceramics are still limited. Many glass and ceramic researchers are interested in enhancing their work by using more data and data analytics to efficiently develop better functional materials. Simultaneously, the data science community is looking for a way to access materials data resources to test and validate their advanced computational learning algorithms. To bring together the glass/ceramic and data science communities to address this issue, The American Ceramic Society (ACerS) convened a Glass/Ceramics Data Science Workshop on February 6, 2018, at Nexight Group offices in Silver Spring, Maryland. The workshop, sponsored by the National Institute for Standards and Technology (NIST) Advanced Manufacturing Technologies (AMTech) program, brought together a select group of 20 key leaders in the data science, informatics, and glass/ceramics communities to identify the greatest opportunities and mechanisms for facilitating increased collaboration and coordination between these communities. This article summarizes workshop discussions about the current challenges that limit interactions and collaboration between the glass/ceramic and data science communities, opportunities for a coordinated approach that leverages existing knowledge in both communities, and a clear path toward the enhanced use of data science technologies for functional glass and ceramic research and development.

data science, ceramics, informatics↗

Highly Selective Supported Graphene Oxide Membranes for Water-Ethanol Separation

Polyethersulfone (PES)-supported graphene oxide (GO) membrane has been developed by a simple casting approach. This stable membrane is applied for ethanol/water separation at different temperatures. The 5.0 µm thick GO film coated on PES membrane showed a long-term stability over a testing period of one month and excellent water/ethanol selectivity at elevated temperatures. The water/ethanol selectivity is dependent on the ethanol weight percentage in the water/ethanol feed mixtures and the operating temperature. The water/ethanol selectivity was enhanced with an increase of ethanol weight percentage in water/ethanol mixtures and from below 100 at RT to close to 874 at 90 ºC for 90% ethanol/10% water mixture. Molecular simulations of water-ethanol mixtures in graphene bilayers that are considered to play a key role in transport revealed that molecular transport is negligible for layer spacing below 1 nm. The differences in the diffusion of ethanol and water in the bilayer are not consistent with the large selectivity value experimentally observed. The entry of water and ethanol into the interlayer space may be the crucial step controlling the selectivity.

36 MATERIALS SCIENCE↗

In Situ Study of Particle Precipitation in Metal-Doped CeO2 during Thermal Treatment and Ion Irradiation for Emulation of Irradiating Fuels

Metallic particles formed in oxide fuels (e.g., UO 2 ) during neutron irradiation have an adverse impact on fuel performance. A fundamental investigation of particle precipitation is needed to predict the fuel performance and potentially improve fuel designs and operations. In this study, we report on the precipitation of Mo-dominant β-phase particles in polycrystalline CeO 2 (surrogate for UO 2 ) films doped with Mo, Pd, Rh, Ru, and Re (surrogate for Tc). In situ heating scanning transmission electron microscopy indicates that particle precipitation starts at ~1073 K with a limited particle growth to ~10 nm. While particle concentration increases with increasing temperature, particle size remains largely unchanged up to 1273 K. There is a dramatic change in the microstructure following vacuum annealing at 1373 K, probably due to phase transition of reduced cerium oxide. At the high temperature, particles grow up to 75 nm or larger with distinctive facets. The particles are predominantly composed of Mo with a body-centered cubic structure (β phase). An oxide layer was observed after storage at ambient conditions. In situ heating X-ray photoelectron spectroscopy reveals an increasing reduction of Ce charge state from 4+ to 3+ in the doped CeO 2 film at temperatures from 673 to 1273 K. In situ ion irradiation transmission electron microscopy with 2 MeV Al 2+ ions up to a dose of ~20 displacements per atom at nominally room temperature does not lead to precipitation of visible particles. However, irradiation with 1.7 MeV Au 3+ ions to ~10 dpa at 973 K produces ~2 nm sized pure Pd particles; Au 3+ irradiation at 1173 K appears to result in precipitates of ~6 nm in size. Some of the defects produced by ion irradiation could be nucleation sites for precipitation, leading to generation of smaller particles with a higher concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of interfaces in damage process of irradiated lithium aluminate nanocrystals

Molecular dynamics simulations were performed to understand the differences in the response of single crystal and nanocrystalline ?-LiAlO2 to energy deposition by 10 keV Li recoils. The simulations are performed at 573 K and focus on the damage production in the absence of thermal annealing. The grain boundaries in the nanocrystals are found to be amorphous. Analyses of the fate of the beam ions show that the amorphous grain boundaries and differently oriented nanograins increase the number of back-scattered ions and decrease the number of transmitted ions. Damaged regions protruding from the grain boundaries provide a direct evidence of the role of the grain boundaries as scattering centers in collision cascades. The simulations show that the defect density produced in the nanocrystals is about twice that in the single crystals. In both samples, Li defects account for 70% of the defects, demonstrating that LiO4 tetrahedra is much more susceptible to damage than AlO4 tetrahedra. Furthermore, Li defects occur preferentially near grain boundaries. Diffusion simulations confirm the limited thermal diffusion of defects at 573 K, effectively separating the damage production from thermal annealing in the irradiation simulations. Nevertheless, the mean square displacements of grain boundary defects are found to be larger than lattice defects and surface defects.

lithium aluminate, interfaces, irradiation, molecu↗

Unit mechanisms of fission gas release: Current understanding and future needs

Gaseous fission product transport and release has a large impact on fuel performance, degrading fuel properties and, once the gas is released into the gap between the fuel and cladding, lowering gap thermal conductivity and increasing gap pressure. While gaseous fission product behavior has been investigated with bulk reactor experiments and simplified analytical models, recent improvements in experimental and modeling approaches at the atomistic and mesoscales are being applied to provide unprecedented understanding of the unit mechanisms that define the fission product behavior. In this article, existing research on the basic mechanisms behind the various stages of fission gas release during normal reactor operation are summarized and critical areas where experimental and simulation work is needed are identified. This basic understanding of the fission gas behavior mechanisms has the potential to revolutionize our ability to predict fission product behavior during reactor operation and to design fuels that have improved fission product retention. In addition, this work can serve as a model on how a coupled experimental and modeling approach can be applied to understand the unit mechanisms behind other critical behaviors in reactor materials.

computer simulation↗

Carbon diffusion in molten uranium: an ab initio molecular dynamics study

In this work we used ab initio molecular dynamics (AIMD) within the framework of density functional theory (DFT) and the projector-augmented wave (PAW) method to study carbon diffusion in liquid uranium at temperatures above 1600 K. The electronic interactions of carbon and uranium were described using the local density approximation (LDA). The self-diffusion of uranium based on this approach is compared with literature computational and experimental results for liquid uranium. The temperature dependence of carbon and uranium diffusion in the melt was evaluated by fitting the resulting diffusion coefficients to an Arrhenius relationship. We found that the LDA calculated activation energy for carbon was nearly twice that of uranium: 0.55±0.03 eV for carbon compared to 0.32±0.04 eV for uranium. Structural analysis of the liquid uranium-carbon system is also discussed.

Molecular dynamics computer simulation, Nuclear Pr↗

Nanoparticle Precipitation in Irradiated and Annealed Ceria Doped with Metals for Emulation of Spent Fuels

Epsilon alloy precipitates have been observed with varied compositions and sizes in spent nuclear fuels, such as UO2. Presence of the inclusions, along with other oxide precipitates, gas bubbles and irradiation-induced structural defects, can significantly degrade the physical properties of the fuel. To predict fuel performance, a fundamental study of the precipitation processes is needed. This study uses ceria (CeO2) as a surrogate for UO2. Polycrystalline CeO2 films doped with Mo, Ru, Rh, Pd and Re (surrogate for Tc) were grown at 823 K using pulsed laser deposition, irradiated at 673 K with He+ ions, and subsequently annealed at higher temperatures. A number of methods, including transmission electron microscopy and atom probe tomography, were applied to characterize the samples. The results indicate that there is a uniform distribution of the doped metals in the as-grown CeO2 film. Pd particles of ~3 nm in size appear near dislocation edges after He+ ion irradiation to ~13 dpa. Thermal annealing at 1073 K in air leads to formation of precipitates with Mo and Pd around grain boundaries. Further annealing at 1373 K produces 70 nm sized precipitates with small grains at cavities.

Jiang, Weilin↗

Precipitation of Epsilon Particles in Metal Doped Ceria Irradiated with Energetic Ions

Metallic particles precipitated from fission products in oxide fuel matrix (e.g., UO{sub 2}) have a great impact on the thermal and mechanical properties of the fuel. A burn-up of 40 MWd/kg U results in the conversion of 4% of the uranium to approximately 3% fission products and 1% transuranium elements. Epsilon phase is the major metallic phase of the precipitates with a hexagonal-closed packed (HCP) crystal structure. It can exist in a variety of metallic forms in UO{sub 2}, but typically, it consists of five metals: Mo, Pd, Rh, Ru and Tc. Epsilon particles can form over a wide range of stoichiometries in the five metal system. Simulated compositions with Re as a surrogate for Tc have been investigated as a waste form for {sup 99}Tc, an isotope with a long half-life of 2.13 10{sup 5} years and a high solubility under oxidizing conditions in addition to Mo in the corrosion process. There is a pressing need to understand the factors influencing the formation and growth of the metallic phase in fuel. Efforts are currently underway to perform careful neutron irradiation of nuclear fuel under controlled conditions in a test reactor, recover metallic phases that may be present, and characterize the resulting structure and chemistry. Due to the long duration, high cost and radiological concerns associated with neutron irradiation and sample characterizations, ion irradiation studies of a surrogate material with a full control of the processing parameters can emulate different stages of the particle precipitation, which can add a tremendous value to reactor-based studies. This presentation reports our recent ion irradiation results on the metallic particle precipitation under various irradiation and thermal annealing conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Precipitation of Epsilon Particles in Metal Doped Ceria Irradiated with Energetic Ions

This paper reports on precipitation of metallic particles in CeO2, a surrogate for UO2. Pulsed laser deposition was used to grow polycrystalline CeO2 films doped with 2 wt.% Mo, 0.75 wt.% Pd, 0.25 wt.% Rh, 1.5 wt.% Ru and 0.5 wt.% Re. The dopants are uniformly distributed in CeO2 in the as-grown samples. He+ ion irradiation at 673 K leads to formation of Pd nanoparticles in the CeO2 matrix. In-situ irradiation transmission electron microscopy at room temperature does not provide any evidence of particle precipitation. Epsilon particles containing the 5 metallic dopants are observed in both the as-grown and He+ ion irradiated CeO2 after thermal annealing at 1273 K.

Jiang, Weilin↗

Fundamentals of Condensed Matter Physics Marvin L. Cohen and Steven G. Louie

This graduate level textbook on Condensed Matter Physics is written lucidly by two leading luminaries in this field. The volume draws its material from the graduate course in condensed matter physics that has been offered by the authors for several decades at the University of California, Berkeley. Cohen and Louie have done an admirable job of guiding the reader gradually from elementary concepts to advanced topics. The book is divided into four main parts that have four chapters each. Chapter 1 presents models of solids in terms of interacting atoms, which is appropriate for the ground state, and excitations to describe collective effects. Chapter 2 deals with the properties of electrons in crystalline materials. The authors introduce the Born-Oppenheimer approximation and then proceed to the periodic potential approximation. Chapter 3 discusses energy bands in materials and covers concepts from the free electron model to the tight binding model and periodic boundary conditions. Chapter 4 starts with fixed atomic cores and introduces lattice vibrations, phonons, and the concept of density of states. By the end of this part, the student should have a basic understanding of electrons and phonons in materials. Part II presents electron dynamics and the response of materials to external probes. Chapter 5 covers the effective Hamiltonian approximation and the motion of the electron under a perturbation, such as an external field. The discussion moves to many-electron interactions and the exchange-correlation energy in Chapter 6, the widely-used Density Functional Theory (DFT) in chapter 7, and the dielectric response function in Chapter 8. The next two parts of the book cover advanced topics. Part III begins with a discussion of the response of materials to photons in Chapter 9. Chapter 10 goes into the details of electron-phonon interactions in different materials and introduces the polaron. Chapter 11 presents electron dynamics in a magnetic field and Chapter 12 discusses electrical and thermal transport in materials. Part IV takes the reader further into many body effects, superconductivity, and nanoscale materials. The authors introduce Feynman diagrams and many-body perturbation theory in Chapter 13, theories of superconductivity in Chapter 14, magnetism in Chapter 15, and low dimensional systems in Chapter 16. The first two parts are required reading for the beginner planning to perform DFT calculations. The advanced student interested in conducting research in condensed matter physics will benefit from continuing on to the last two parts. There is a set of problems at the end of each part. The narrative is aided by equations and detailed figures. References at the end of the book direct the reader to relevant books and review articles for each chapter. The inside covers include a periodic table and a useful list of fundamental physical constants. The authors present the underlying mathematics elegantly, which makes the textbook quite readable for those with a good mathematical background. Students lacking a firm footing in math will find the terrain rough after Chapter 1. This field has seen many good undergraduate textbooks including those by Kittel and by Ashcroft and Mermin. This volume fills the need for a rigorous graduate level textbook, and is a required addition to the bookshelf of every condensed matter physicist. Cohen and Louie have brought refreshing clarity to a challenging subject and made it eminently accessible to the motivated student.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular Dynamics Simulation of Fission Fragment Damage in Nuclear Fuel and Surrogate Material

We have performed classical molecular dynamics simulations of swift heavy ion damage, typical of fission fragments, in nuclear fuel (UO2) for energy deposition per unit length of 3.9 keV/nm. We did not observe amorphization. The damage mainly consisted of isolated point defects. Only about 1% of the displacements occur on the uranium sublattice. Oxygen Frenkel pairs are an order of magnitude more numerous than uranium Frenkel pairs in the primary damage state. In contrast, previous results show that the ratio of Frenkel pairs on the two sublattices is close to the stoichiometric ratio in ceria. These differences in the primary damage state may lead to differences in radiation response of UO2 and CeO2.

Molecular dynamics, radiation damage in materials,↗