Search NASA⌕ Search

Engineering topics

Dexheimer, Darielle

Publications and source records attributed to Dexheimer, Darielle.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Observational data from uncrewed systems over Southern Great Plains

Uncrewed Systems (UxS), including uncrewed aerial systems (UAS) and tethered balloon/kite systems (TBS), are significantly expanding observational capabilities in atmospheric science. Rapid adaptation of these platforms and the advancement of miniaturized instruments have resulted in an expanding number of data sets captured under various environmental conditions by the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility. In 2021, observational data collected using ARM UxS platforms, including seven TigerShark UAS flights and 133 tethered balloon system (TBS) flights, were archived by the ARM Data Center and made publicly available to the user community https://adc.arm.gov/discovery/#/results/s::sgp*U3 and https://adc.arm.gov/discovery/#/results/s::sgp*tbs. These data streams provide new perspectives on spatial variability of atmospheric and surface parameters, helping to address critical science questions in Earth system science research. This manuscript describes the DOE UAS/TBS datasets, including information on the acquisition, collection, and quality control processes, and highlights the potential scientific contributions using UAS and TBS platforms.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Camera Files from SAIL TBS

Visible and infrared photos obtained by the Mirage 640 were taken during the May 2022 SAIL TBS deployment. Imaging purposes include trying to track the sensible heat flux and surface variabilty in the snowpack.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

ARM TBS and TigerShark deployment data in 2021

In 2021, observational data collected using ARM platforms, including seven TigerShark UAS flights and 133 tethered balloon system (TBS) flights, were archived by the ARM Data Center and made publicly available to the user community.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Characterization of Particle and Heat Losses from a High-Temperature Particle Receiver (2 nd Ed)

High - temperature particle receivers are being pursued to enable next - generation concentrating solar thermal power (CSP) systems that can achieve higher temperatures (> 700 C) to enable more efficient power cycles, lower overall system costs, and emerging CSP - based process - heat applications. The objective of this work was to develop characterization methods to quantify the particle and heat losses from the open aperture of the particle receiver. Novel camera - based imaging methods were developed and applied to both laboratory - scale and larger 1 MW t on - sun tests at the National Solar Thermal Test Facility in Albuquerque, New Mexico. Validation of the imaging methods was performed using gravimetric and calorimetric methods. In addition, conventional particle - sampling methods using volumetric particle - air samplers were applied to the on - sun tests to compare particle emission rates with regulatory standards for worker safety and pollution. Novel particle sampling methods using 3 - D printed tipping buckets and tethered balloons were also developed and applied to the on - sun particle - receiver tests. Finally, models were developed to simulate the impact of particle size and wind on particle emissions and concentrations as a function of location. Results showed that particle emissions and concentrations were well below regulatory standards for worker safety and pollution. In addition, estimated particle temperatures and advective heat losses from the camera - based imaging methods correlated well with measured values during the on - sun tests.

14 SOLAR ENERGY↗
DOE OSTI2021

Size and Time-Resolved Automated Aerosol Sampling Field Campaign Report

To improve the understanding of the impacts of the vertical distribution of aerosol chemical composition on radiative forcing of aerosol, we performed a detailed physicochemical characterization of aerosol particles sampled during ARM deployment of the tethered balloon system at two ARM sites. We used multi-modal microscopy/spectroscopy techniques and advanced mass spectrometry platforms for the analysis of particles. We found variations in size-resolved aerosol composition at different altitudes. We also observed changes in aerosol composition during different seasons. Some of our observations at ARM’s Oliktok Point, Alaska site suggest cloud processing of aerosol while sampling in clouds, below clouds, and above clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Cloud Droplet Measurement System for the ARM Tethered Balloon System (TBS) Field Campaign Report

The Mesa Photonics' cloud droplet measurement system (CDMS) performs in situ measurement of droplet size distribution and droplet number density in clouds. These characteristics are important cloud microphysical properties that are critical input parameters for atmospheric models and are also useful for proper calibration and validation of performance of other atmospheric measurement instrumentation. This small campaign was the first project (out of two) that involved integration of the CDMS into the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility’s tethered balloon system (TBS) and its initial testing at the ARM Southern Great Plains (SGP) atmospheric observatory. The follow-up campaign (AFC07016) involved testing of the CDMS under relevant conditions at the third ARM Mobile Facility (AMF3) at Oliktok Point, Alaska and making in situ measurements in clouds. The goal of this small field campaign was to deploy the CDMS on the ARM TBS, demonstrate its integrity and compatibility with the TBS, and test the wireless telecommunication system in preparation for subsequent in-cloud measurements at ARM’s North Slope of Alaska (NSA) observatory at Utqiagvik (formerly Barrow). The specific technical objectives included: (1) Integration of the Mesa Photonics' CDMS into the ARM TBS, (2) testing of the wireless telecommunication system of the CDMS, (3) evaluating the data acquisition software and image processing algorithms especially under high-background-illumination conditions, and (4) testing the ruggedness of the instrument's optical alignment and other performance characteristics. All objectives have been successfully met. The mounting hardware was designed and built mostly at Sandia National Laboratories (SNL), which allowed reliable mounting of the CDMS on the TBS and co-locating the CDMS with other instruments. The field tests were performed by the principal investigator (PI) in collaboration with the TBS operational crew led by D. Dexheimer. The field testing demonstrated good compatibility of the CDMS with the TBS. During the TBS flights, the crew did not experience any operational issues with the CDMS. The instrument demonstrated reliable operational characteristics, including sufficient battery life and good thermal management. The wireless telecommunication system has been successfully tested at TBS flight altitudes of up to 1000 m. During all flights, the CDMS raw data were wirelessly transmitted to the ground station and processed in real time. The ruggedness of the instrument's optical alignment was evaluated by performing calibration of the CDMS (using Mesa Photonics' fixed-size monodisperse droplet generator) before and after the campaign. The calibration was stable within the instrument's measurement precision. In summary, the campaign demonstrated good compatibility of the Mesa Photonics' CDMS with the ARM TBS. The flight tests confirmed the mechanical integrity of the CDMS and stability of its optical layout, as well as reliability of the wireless telecommunication system. Successful completion of this campaign provided a solid basis for the next campaign (AFC07016, November 2020), that involved testing of the CDMS during in-cloud TBS flights at AMF3 at Oliktok Point.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Characterization of Particle and Heat Losses from a High-Temperature Particle Receiver

High-temperature particle receivers are being pursued to enable next-generation concentrating solar thermal power (CSP) systems that can achieve higher temperatures (> 700 °C) to enable more efficient power cycles, lower overall system costs, and emerging CSP-based process-heat applications. The objective of this work was to develop characterization methods to quantify the particle and heat losses from the open aperture of the particle receiver. Novel camera- based imaging methods were developed and applied to both laboratory-scale and larger 1 MW t on-sun tests at the National Solar Thermal Test Facility in Albuquerque, New Mexico. Validation of the imaging methods was performed using gravimetric and calorimetric methods. In addition, conventional particle-sampling methods using volumetric particle-air samplers were applied to the on-sun tests to compare particle emission rates with regulatory standards for worker safety and pollution. Novel particle sampling methods using 3-D printed tipping buckets and tethered balloons were also developed and applied to the on-sun particle-receiver tests. Finally, models were developed to simulate the impact of particle size and wind on particle emissions and concentrations as a function of location. Results showed that particle emissions and concentrations were well below regulatory standards for worker safety and pollution. In addition, estimated particle temperatures and advective heat losses from the camera-based imaging methods correlated well with measured values during the on-sun tests.

14 SOLAR ENERGY↗
DOE OSTI2021

Assessing the vertical structure of Arctic aerosols using balloon-borne measurements

The rapidly warming Arctic is sensitive to perturbations in the surface energy budget, which can be caused by clouds and aerosols. However, the interactions between clouds and aerosols are poorly quantified in the Arctic, in part due to (1) limited observations of vertical structure of aerosols relative to clouds and (2) ground-based observations often being inadequate for assessing aerosol impacts on cloud formation in the characteristically stratified Arctic atmosphere. Here, we present a novel evaluation of Arctic aerosol vertical distributions using almost 3 years' worth of tethered balloon system (TBS) measurements spanning multiple seasons. The TBS was deployed at the U.S. Department of Energy Atmospheric Radiation Measurement Program's facility at Oliktok Point, Alaska. Aerosols were examined in tandem with atmospheric stability and ground-based remote sensing of cloud macrophysical properties to specifically address the representativeness of near-surface aerosols to those at cloud base. Based on a statistical analysis of the TBS profiles, ground-based aerosol number concentrations were unequal to those at cloud base 86 % of the time. Intermittent aerosol layers were observed 63 % of the time due to poorly mixed below-cloud environments, mostly found in the spring, causing a decoupling of the surface from the cloud layer. A uniform distribution of aerosol below cloud was observed only 14 % of the time due to a well-mixed below-cloud environment, mostly during the fall. The equivalent potential temperature profiles of the below-cloud environment reflected the aerosol profile 89 % of the time, whereby a mixed or stratified below-cloud environment was observed during a uniform or layered aerosol profile, respectively. In general, a combination of aerosol sources, thermodynamic structure, and wet removal processes from clouds and precipitation likely played a key role in establishing observed aerosol vertical structures. Results such as these could be used to improve future parameterizations of aerosols and their impacts on Arctic cloud formation and radiative properties.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Tethered Balloon Systems

Among ARM’s aerial platforms are tethered balloon systems (TBS), which consist of a helium-filled balloon, tether, winch, and sensors. TBS provide a safe way to collect data inside clouds, including mixed-phase clouds, where icing is a concern for airborne platforms. These systems are also flown above and below clouds to gather data related to wind, turbulence, thermodynamic state, aerosols, and the cloud-top environment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

ARM Aerial Instrument Workshop Report

The mission of the U.S. Department of Energy’s (DOE) Biological and Environmental Research (BER) program is to “support transformative science and scientific user facilities to achieve a predictive understanding of complex biological, earth, and environmental systems for energy and infrastructure security, independence, and prosperity.” (https://science.osti.gov/ber) Aligned with the BER central mission, the Earth and Environmental Systems Sciences Division (EESSD) plays a vital role in supporting the fundamental research to understand and predict Earth’s climate and environmental systems, and is also in a unique position to inform the development of sustainable solutions to the nation’s energy and environmental challenges. Specifically, EESSD manages two scientific user facilities: the Atmospheric Radiation Measurement (ARM) user facility and the Environmental Molecular Sciences Laboratory (EMSL). These facilities provide the broader scientific community with scientific expertise, technical capabilities, and unique data sets to facilitate science in areas of importance to DOE. As a multi-platform scientific user facility, ARM aims to fulfill the needs predominantly within the EESSD Atmospheric System Research (ASR) and the Earth and Environmental System Modeling (EESM) mission areas, and provide the critical measurements required to improve understanding of aerosol and cloud life cycles and their interactions, and their coupling with the Earth’s surface. Over the years, ARM has carried out piloted and unmanned aircraft campaigns under different organizational and operational paradigms (Schmid et al. 2014, 2016). Building on its success, the ARM Aerial Facility (AAF) continues to complement the ground-based observations with airborne in situ cloud, aerosol, and trace gas observations as well as measurements of atmospheric state and atmospheric radiation. During the past three years, ARM has managed field campaigns using unmanned aerial systems (UAS) and tethered balloon systems (TBS) at Oliktok Point in Alaska to improve understanding of atmospheric processes in the Arctic. In 2019, following a careful evaluation of scientific community needs, ARM acquired a Bombardier Challenger 850 regional jet to replace the vintage Grumman Gulfstream-159 turboprop aircraft previously used by AAF. With this new “laboratory in the sky”, AAF is evaluating its current and future aerial observation capabilities to continue satisfying the needs of the research community.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Multihour Stratospheric Flights with the Heliotrope Solar Hot-Air Balloon

Standard meteorological balloons can deliver small scientific payloads to the stratosphere for a few tens of minutes, but achieving multihour level flight in this region is more difficult. We have developed a solar-powered hot-air balloon named the heliotrope that can maintain a nearly constant altitude in the upper troposphere–lower stratosphere as long as the sun is above the horizon. It can accommodate scientific payloads ranging from hundreds of grams to several kilograms. The balloon can achieve float altitudes exceeding 24 km and fly for days in the Arctic summer, although sunset provides a convenient flight termination mechanism at lower latitudes. Two people can build an envelope in about 3.5 h, and the materials cost about $30. The low cost and simplicity of the heliotrope enables a class of missions that is generally out of reach of institutions lacking specialized balloon expertise. Here, we discuss the design history, construction techniques, trajectory characteristics, and flight prediction of the heliotrope balloon. We conclude with a discussion of the physics of solar hot-air balloon flight.

54 ENVIRONMENTAL SCIENCES↗