Engineering topics
DiAntonio, Christopher Brian
Publications and source records attributed to DiAntonio, Christopher Brian.
Thermal characterization and properties of a copper-diamond composite
The thermal properties of a commercial copper-diamond composite were measured from below -50°C to above 200°C. The results of thermal expansion, heat capacity, and thermal diffusivity were reported. These data were used to calculate the thermal conductivity of the composite as a function of temperature in the thickness direction. These results are compared with estimated values based on a simple mixing rule and the temperature dependence of these physical properties is represented by curve fitting equations. These fitting equations can be used for thermal modeling of practical devices/systems at their operation temperatures. The results of the mixing rule showed a consistent correlation between the amount of copper and diamond in the composite, based on density, thermal expansion, and heat capacity measurements. However, there was a disparity between measured and estimated thermal diffusivity and thermal conductivity. These discrepancies can be caused by many intrinsic material issues such as lattice defects and impurities, but the dominant factor is attributed to the large uncertainty of the interfacial thermal conductance between diamond and copper.
New Macroporous Ceramic Pellets for use as Thermal Battery Separator Layers.
Abstract not provided.
Field Assisted Sintering of Functional Nanoparticle Oxide Ceramics for Nanocrystalline Bulk Materials.
Abstract not provided.
New composite separator pellet to increase power density and reduce size of thermal batteries
We show that it is possible to manufacture strong macroporous ceramic films that can be backfilled with electrolyte to form rigid separator pellets suitable for use in thermal batteries. Several new ceramic manufacturing processes are developed to produce sintered magnesium oxide foams with connected porosities of over 80% by volume and with sufficient strength to withstand the battery manufacturing steps. The effects of processing parameters are quantified, and methods to imbibe electrolyte into the ceramic scaffold demonstrated. Preliminary single cell battery testing show that some of our first generation pellets exhibit longer voltage life with comparable resistance at the critical early times to that exhibited by a traditional pressed pellets. Although more development work is needed to optimize the processes to create these rigid separator pellets, the results indicate the potential of such ceramic separator pellets to be equal, if not superior to, current pressed pellets. Furthermore, they could be a replacement for critical material that is no longer available, as well as improving battery separator strength, decreasing production costs, and leading to shorter battery stacks for long-life batteries.
Synthesis Development and Characterization of Novel Nanoparticle Ferrite Materials.
Abstract not provided.
Failure Analysis of Zinc Oxide based Varistor material through X-Ray Computed Microtomography.
Abstract not provided.
Synthesis Development and Characterization of Novel Nanoparticle Ferrite Materials.
Abstract not provided.
Synthesis Development and Characterization of Novel Nanoparticle Ferrite Materials.
Abstract not provided.
Experimental Investigation of Arc Discharges in the Presence of Advanced Material Interfaces in Atmospheric Gas.
Abstract not provided.
Synthesis Development and Characterization of Novel Barium Titanate Lead Lanthanum Zirconate Titanate and NiCuZn Ferrite Nanoparticle Materials.
Abstract not provided.
Highly Porous Ceramic Foams from Magnesium Oxide Stabilized Pickering Emulsions.
Abstract not provided.
Synthesis and Characterization of Nanoparticle/Nanocrystalline Barium Titanate and PLZT for Functional Nanoparticle-Polymer Composites.
Abstract not provided.
HIGHLY POROUS CERAMIC FOAMS FROM MAGNESIUM OXIDE STABILIZED PICKERING EMULSIONS.
Abstract not provided.
Synthesis Development and Characterization of Novel Barium Titanate Lead Lanthanum Zirconate Titanate and NiCuZn Ferrite Nanoparticle Materials.
Abstract not provided.