Search NASA⌕ Search

Engineering topics

Diego P Capriotti

Publications and source records attributed to Diego P Capriotti.

3 records
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

TPSAS-NF1676L-16463-DND

Ceramic Matrix Composites (CMCs) have been proposed for hot structures in scramjet combustors. Previous studies have calculated significant weight savings by utilizing CMCs (active and passive) versus actively cooled metallic scramjet structures. Both a C/C and a C/C-SiC material system fabricated by DLR (Stuttgart, Germany) are being considered for use in a passively cooled combustor design for HIFiRE 8, a joint Australia / AFRL hypersonic flight program, expected to fly at Mach 7 for ~ 30 sec, at a dynamic pressure of 55 kPa. Flat panels of the DLR C/C and the C/C-SiC were tested in the NASA Langley Direct Connect Rig (DCR) at Mach 5 and Mach 6 enthalpy for several minutes. Gaseous hydrogen fuel was used to fuel the scramjet combustor. The test panels were instrumented with embedded Type K and Type S thermocouples. Zirconia felt insulation was used in some of the tests to increase the surface temperature of the C/C-SiC panel ~ 350?F. The final C/C-SiC panel was tested for 3 cycles totaling over 135 sec at Mach 6 enthalpy. Slightly more erosion was observed on the C/C panel than the C/C-SiC panels, but both material systems demonstrated acceptable recession performance for the HIFiRE 8 flight.

David E Glass↗
NASA NTRSDate not supplied

Test Capabilities of the NASA Langley Direct Connect Supersonic Combustion Test Facility

In 1969 a combustion-heated direct-connect test facility was assembled at the NASA Langley Research Center and used to support NASA’s Hypersonic Research Engine program. Later, the facility was used to support NASA’s generic hypersonic program, assessing the mixing, ignition, flame holding, and combustion characteristics of ramjet and scramjet combustors. Over the years, the facility has been updated and modified to conduct increasingly complicated tests. Today, the facility is known as the Direct Connect Supersonic Combustion Test Facility (DCSCTF) and is part of the NASA Langley Scramjet Test Complex. Recently, the facility has been used by external customers to test fuel-cooled and uncooled, flight-like test articles. Tests have been conducted at nominal Mach 5 flight conditions for up to 15 minutes of continuous operation. The facility remains a viable and useful tool in the support of various Department of Defense projects.

Diego P Capriotti↗