Engineering topics

Dillenius, Marnix F. E.

Publications and source records attributed to Dillenius, Marnix F. E..

5 records

NASA NTRS1992

Improvements to the missile aerodynamic prediction code DEMON3

The computer program DEMON3 was developed for the aerodynamic analysis of nonconventional supersonic configurations comprising a body with noncircular cross section and up to two wing or fin sections. Within a wing or fin section, the lifting surfaces may be cruciform, triform, planar, or low profile layouts; the planforms of the lifting surfaces allow for breaks in sweep. The body and fin sections are modeled by triplet and constant u-velocity panels, respectively, accounting for mutual body-fin interference. Fin thickness effects are included for the use of supersonic planar source panels. One of the unique features of DEMON3 is the modeling of high angle of attack vortical effects associated with the lifting surfaces and the body. In addition, shock expansion and Newtonian pressure calculation methods can be optionally engaged. These two dimensional nonlinear methods are augmented by aerodynamic interference determined from the linear panel methods. Depending on the geometric details of the body, the DEMON3 program can be used to analyze nonconventional configurations at angles of attack up to 25 degrees for Mach numbers from 1.1 to 6. Calculative results and comparisons with experimental data demonstrate the capabilities of DEMON3. Limitations and deficiencies are listed.

Dillenius, Marnix F. E.↗

NASA NTRS1992

Paneling methods with vorticity effects and corrections for nonlinear compressibility

Supersonic panel methods and axisymmetric body-modeling singularity methods are presently combined with corrections for nonlinear flow phenomena to a complete missile, its airbreathing inlets, and wing-body combinations. The computer code LRCDM2 is used as an illustrative example of the methods in question. Attention is given to a preliminary method which employs panels to estimate additive drag and lift acting on supersonic rectangular inlets, as well as to the method used to correct off-body flowfields for the presence of a shock. Examples of missile applications of these methods with the appropriate nonlinear corrections are presented.

Dillenius, Marnix F. E.↗

NASA NTRS1991

Estimation of additive forces and moments for supersonic inlets

A technique for estimating the additive forces and moments associated with supersonic, external compression inlets as a function of mass flow ratio has been developed. The technique makes use of a low order supersonic paneling method for calculating minimum additive forces at maximum mass flow conditions. A linear relationship between the minimum additive forces and the maximum values for fully blocked flow is employed to obtain the additive forces at a specified mass flow ratio. The method is applicable to two-dimensional inlets at zero or nonzero angle of attack, and to axisymmetric inlets at zero angle of attack. Comparisons with limited available additive drag data indicate fair to good agreement.

Perkins, Stanley C., Jr.↗

NASA NTRS1986

Paneling methods with vorticity effects and corrections for nonlinear compressibility

The prediction of missile aerodynamic characteristics is presently undertaken through the application of supersonic paneling methods and nonlinear corrections to the prediction of missile aerodynamic characteristics. Attention is given to supersonic panel methods and line-singularity methods for the modeling of axisymmetric bodies, in combination with corrections for nonlinear flow phenomena, which are applied to complete missile, inlets, and wing-body combinations. The LRCDM2 computer program is used as an example of the methods presented.

Dillenius, Marnix F. E.↗

NASA NTRS1985

Program LRCDM2: Improved aerodynamic prediction program for supersonic canard-tail missiles with axisymmetric bodies

Program LRCDM2 was developed for supersonic missiles with axisymmetric bodies and up to two finned sections. Predicted are pressure distributions and loads acting on a complete configuration including effects of body separated flow vorticity and fin-edge vortices. The computer program is based on supersonic panelling and line singularity methods coupled with vortex tracking theory. Effects of afterbody shed vorticity on the afterbody and tail-fin pressure distributions can be optionally treated by companion program BDYSHD. Preliminary versions of combined shock expansion/linear theory and Newtonian/linear theory have been implemented as optional pressure calculation methods to extend the Mach number and angle-of-attack ranges of applicability into the nonlinear supersonic flow regime. Comparisons between program results and experimental data are given for a triform tail-finned configuration and for a canard controlled configuration with a long afterbody for Mach numbers up to 2.5. Initial tests of the nonlinear/linear theory approaches show good agreement for pressures acting on a rectangular wing and a delta wing with attached shocks for Mach numbers up to 4.6 and angles of attack up to 20 degrees.

Dillenius, Marnix F. E.↗