Search NASA⌕ Search

Engineering topics

Ding, Dong

Publications and source records attributed to Ding, Dong.

At least 37 records · Page 2

Root Cause Analysis of Degradation in Protonic Ceramic Electrochemical Cell with Interfacial Electrical Sensors Using Data‐Driven Machine Learning

Abstract Protonic ceramic electrochemical cells (PCECs) offer promising paths for energy storage and conversion. Despite considerable achievements made, PCECs still face challenges such as physiochemical compatibility between componenets and suboptimal solid–solid contact at the interfaces between the electrolytes and electrodes. In this study, a novel approach is proposed that combines in situ electrochemical characterization of interfacial electrical sensor embedded PCECs and machine learning to quantify the contributions of different cell components to total degradation, as well as to predict the remaining useful life. The experimental results suggest that the overpotential induced by the oxygen electrode is 48% less than that of oxygen electrode/electrolyte interfacial contact for up to 1171 h. The data‐driven machine learning simulation predicts the RUL of up to 2132 h. The root cause of degradation is overpotential increase induced by oxygen electrode, which accounts for 82.9% of total cell degradation. The success of the failure diagnostic model is demonstrated by its consistency with degradation modes that do not manifest in electrolysis fade during early real operations. This synergistic approach provides valuable insights into practical failure diagnosis of PCECs and has the potential to revolutionize their development by enabling improved performance prediction and material selection for enhanced durability and efficiency.

25 ENERGY STORAGE↗

Methods for co-producing hydrocarbon products and ammonia

A method of a hydrocarbon product and ammonia comprises introducing C 2 H 6 to a positive electrode of an electrochemical cell comprising the positive electrode, a negative electrode, and a proton-conducting membrane between the positive electrode and the negative electrode. The proton-conducting membrane comprising an electrolyte material having an ionic conductivity greater than or equal to about 10 −2 S/cm at one or more temperatures within a range of from about 150° C. to about 600° C. N 2 is introduced to the negative electrode of the electrochemical cell. A potential difference is applied between the positive electrode and the negative electrode of the electrochemical cell. A system for co-producing higher hydrocarbons and NH3, and an electrochemical cell are also described.

Ding, Dong↗

Improved Solid-State Reaction Method for Scaled-Up Synthesis of Ceramic Proton-Conducting Electrolyte Materials

Protonic ceramic electrochemical cells (PCECs) represent promising technologies in the production of clean electricity, decarbonized hydrogen, chemicals, and fuels at intermediate temperatures. One of the challenges in commercializing PCECs is to produce the electrolyte materials on a large scale. The conventional solid-state reaction (SSR) method suffers from tedious synthesis procedures and low phase purity of the products due to the formation of unwanted secondary phases. Herein, we report an improved SSR (i-SSR) method for kilogram-scale production of high phase-purity electrolyte material BaZr 0.4 Ce 0.4 Y 0.1 Yb 0.1 O 3–δ (BZCYYb4411). In this method, the ball-milled precursor powders are pelletized prior to calcination, which effectively reduces the length of the diffusion paths between the components during perovskite phase formation. In this study, the synthesis procedure and calcination temperature are carefully optimized for efficient and repeatable production based on the powder crystallization behavior. A combined technoeconomic analysis and life cycle assessment modeling suggest that the i-SSR method could reduce the total production cost and greenhouse gas emissions by up to 19% and 39%, respectively, compared to the conventional SSR method. The high quality of the synthesized electrolyte material is corroborated by the excellent electrical conductivity and electrochemical performance of the fabricated PCEC cells.

36 MATERIALS SCIENCE↗

Improving Proton Conductivity by Navigating Proton Trapping in High Scandium-Doped Barium Zirconate Electrolytes

Proton-conducting oxides are used in intermediate-temperature (300 °C < T < 700 °C) applications of fuel cells, electrolyzers, membrane reactors, hydrogen pumps, and sensors. The proton conductivity of doped ABO 3 perovskites is partly dependent on the proton concentration and hence on the level of material hydration. However, how the material hydration ability is affected by differences in doping is not fully understood. Here, we show the prospect of proton trapping and detrapping that influences material hydration and dehydration. The proton-trapping influence is significant for Sc-doped BaZrO 3 compared to Y-doped BaZrO 3 . Here, our work offers a perspective to understand how defect interaction/associations influence the hydration ability of proton-conducting oxides. Furthermore, positron annihilation lifetime spectroscopy was revealed to be a valuable technique for studying the proton-trapping phenomena and the defect chemistry of dense proton conductors. Density functional theory calculations also showed that a high hydration level in Sc-doped BaZrO 3 boosts proton migration. In contrast, the effect of boosting the proton migration due to increased hydration is limited for Y-doped BaZrO 3 . This effect, in turn, might explain the trend of conductivity with dopant concentration in doped BaZrO 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Composite media for non-oxidative ethane dehydrogenation, and related ethane activation systems and method of processing an ethane-containing stream

A composite media for non-oxidative C 2 H 6 dehydrogenation comprises an aluminosilicate zeolite matrix, and an EDH catalyst on one or more of an external surface of the aluminosilicate zeolite matrix and internal surfaces within pores of the aluminosilicate zeolite matrix. The EDH catalyst comprises one or more of Fe, Zn, Pt, Ga, alloys thereof, and oxides thereof. A C 2 H 6 activation system, and a method of processing a C 2 H 6 -containing stream are also described.

Wang, Lucun↗

HydroGEN Overview: A Consortium on Advanced Water Splitting Materials

HydroGEN is a multi-lab consortium focused on early-stage R&D in H2 production, supported by the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Hydrogen and Fuel Cell Technologies Office (HFTO). The consortium advances research and development (R&D) of innovative materials for advanced water splitting (AWS) technologies to enable clean, sustainable and low-cost ($1/kg H2) hydrogen production and fosters cross-cutting innovation using theory-guided applied materials R&D to advance all emerging water-splitting pathways for hydrogen production. HydroGEN is focused on low technology readiness level AWS technologies, including low- (alkaline exchanged membrane electrolysis) and high-temperature electrolysis (proton-conducting solid oxide electrolysis), photoelectrochecmical (PEC) and solar thermochemical (STCH) water splitting. This presentation will provide an overview of the HydroGEN EMN and technical highlights of a few lab-led and FOA-awarded R&D projects. HydroGEN continues to grow its community of industry, university, and national laboratories, forming a national innovation ecosystem focused on renewable hydrogen production.

advanced water splitting materials↗

Methods for producing hydrocarbon products and hydrogen gas through electrochemical activation of methane

A method of forming a hydrocarbon product and hydrogen gas comprises introducing CH 4 to a positive electrode of an electrochemical cell comprising the positive electrode, a negative electrode, and a proton-conducting membrane between the positive electrode and the negative electrode. The proton-conducting membrane comprises an electrolyte material having an ionic conductivity greater than or equal to about 10 −2 S/cm at one or more temperatures within a range of from about 150° C. to about 600° C. A potential difference is applied between the positive electrode and the negative electrode of the electrochemical cell to produce the hydrocarbon product and the hydrogen gas. A CH 4 activation system and an electrochemical cell are also described.

Ding, Dong↗

Methods for producing hydrocarbon products and protonation products through electrochemical activation of ethane

A method of forming a hydrocarbon product and a protonation product comprises introducing C2H6 to a positive electrode of an electrochemical cell comprising the positive electrode, a negative electrode, and a proton-conducting membrane between the positive electrode and the negative electrode. The proton-conducting membrane comprises an electrolyte material having an ionic conductivity greater than or equal to about 10−2 S/cm at one or more temperatures within a range of from about 150° C. to about 650° C. A potential difference is applied between the positive electrode and the negative electrode of the electrochemical cell to produce the hydrocarbon product and the protonation product. A C2H6 activation system and an electrochemical cell are also described.

He, Ting↗

Improving the performance for direct electrolysis of CO 2 in solid oxide electrolysis cells with a Sr 1.9 Fe 1.5 Mo 0.5 O 6– δ electrode via infiltration of Pr 6 O 11 nanoparticles

Direct CO 2 electrolysis using solid oxide electrolysis cells (CO 2 -SOECs) holds promise to efficiently convert carbon dioxide to carbon monoxide and oxygen. Cathodes with desirable catalytic activity and chemical stability play a critical role in the development of direct CO 2 -SOECs. Although Sr 2 Fe 1.5 Mo 0.5 O 6–δ (SFM) has exhibited promise for direct CO 2 -SOECs due to its redox stability, it suffers from insufficient activity for the CO 2 reduction reaction (CO 2 RR). Here we report interface engineering of nanosized Pr 6 O 11 on the SFM cathode obtained through infiltration to promote the CO 2 RR performance for direct CO 2 -SOECs. The effect of Pr 6 O 11 loading on the performance of the CO 2 RR is systematically investigated. At 800 °C, the current density of the Pr 6 O 11 infiltrated SFM cathode with an optimum Pr 6 O 11 loading of 14.8 wt% reaches 1.61 A cm –2 at 1.5 V, more than double that of the SFM cathode (0.76 A cm –2 ) under the same operating conditions. X-ray photoelectron spectroscopy (XPS) characterization and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis indicate that the adsorption ability of CO 2 on the SFM cathode has been significantly improved by the formation of Pr 6 O 11 . Temperature-programmed desorption (TPD) of CO 2 measurements further manifest that a 14.8 wt% Pr 6 O 11 -SFM cathode has better CO desorption capacity. In addition, polarization resistance of the SFM cathode has significantly decreased with the addition of Pr 6 O 11 . Three-electrode measurement was used to analyze the improved electrode kinetics. Finally, these results demonstrate that the formation of Pr 6 O 11 in the SFM cathode through infiltration is a promising approach for increasing CO 2 RR activity for CO 2 -SOECs.

03 NATURAL GAS↗

Improved cell performance and sulphur tolerance using A-site substituted Sr2Fe1.4Ni0.1Mo0.5O6–δ anodes for solid-oxide fuel cells

Abstract Solid-oxide fuel cells (SOFCs) offer great promise for producing electricity using a wide variety of fuels such as natural gas, coal gas and gasified carbonaceous solids; however, conventional nickel-based anodes face great challenges due to contaminants in readily available fuels, especially sulphur-containing compounds. Thus, the development of new anode materials that can suppress sulphur poisoning is crucial to the realization of fuel-flexible and cost-effective SOFCs. In this work, La0.1Sr1.9Fe1.4Ni0.1Mo0.5O6–δ (LSFNM) and Pr0.1Sr1.9Fe1.4Ni0.1Mo0.5O6–δ (PSFNM) materials have been synthesized using a sol-gel method in air and investigated as anode materials for SOFCs. Metallic nanoparticle-decorated ceramic anodes were obtained by the reduction of LSFNM and PSFNM in H2 at 850°C, forming a Ruddlesden–Popper oxide with exsolved FeNi3 bimetallic nanoparticles. The electrochemical performance of the Sr2Fe1.4Ni0.1Mo0.5O6–δ ceramic anode was greatly enhanced by La doping of A-sites, resulting in a 44% decrease in the polarization resistance in reducing atmosphere. The maximum power densities of Sr- and Mg-doped LaGaO3 (LSGM) (300 μm) electrolyte-supported single cells with LSFNM as the anode reached 1.371 W cm −2 in H2 and 1.306 W cm–2 in 50 ppm H2S–H2 at 850°C. Meanwhile, PSFNM showed improved sulphur tolerance, which could be fully recovered after six cycles from H2 to 50 ppm H2S–H2 operation. This study indicates that LSFNM and PSFNM are promising high-performance anodes for SOFCs.

Li, Haixia↗

Piezo-electrocatalytic oxidation of methanol with UV-ozone treated wurtzite zinc oxide nanostructures

Leveraging mechanically-induced piezoelectric polarization, piezocatalysis emerges as a viable mechanism for enhancing the efficiency of catalytic processes. Nanostructured, catalytically active, rationally designed piezoelectric semiconductors can achieve high-performance catalysts for various applications using cost-effective electrocatalytic pathways, such as mechanical stimuli. We design and demonstrate for the first time a cost-effective, high-performance piezo-electrocatalyst for anodic methanol oxidation, which is crucial for the practical application and deployment of direct methanol fuel cells in a variety of emerging clean energy technologies. We synthesized wurtzite ZnO nanorods and nanosheets treated with UV-O 3 to characterize and compare their efficacy for piezo-electrocatalytic methanol oxidation. The generation of piezoelectric polarization charges in nanostructured semiconducting ZnO catalysts significantly increased their electrocatalytic performance. By elucidating the charge transfer between mechanically-deformed ZnO nanostructures and methanol molecules, we identified the underlying mechanism for the piezo-electrocatalytic process for methanol oxidation. The facile synthesis of high-quality ZnO nanostructures enables low-cost, scalable manufacture and direct integration into electrocatalysts whose performance could be enhanced by harvesting mechanical energy that would otherwise be wasted in the working environment.

30 DIRECT ENERGY CONVERSION↗

Protonic Ceramic Electrochemical Cells for Synthesizing Sustainable Chemicals and Fuels

Abstract Protonic ceramic electrochemical cells (PCECs) have been intensively studied as the technology that can be employed for power generation, energy storage, and sustainable chemical synthesis. Recently, there have been substantial advances in electrolyte and electrode materials for improving the performance of protonic ceramic fuel cells and protonic ceramic electrolyzers. However, the electrocatalytic materials development for synthesizing chemicals in PCECs has gained less attention, and there is a lack of systematic and fundamental understanding of the PCEC reactor design, reaction mechanisms, and electrode materials. This review comprehensively summarizes and critically evaluates the most up‐to‐date progress in employing PCECs to synthesize a wide range of chemicals, including ammonia, carbon monoxide, methane, light olefins, and aromatics. Factors that impact the conversion, selectivity, product yield, and energy efficiencies are discussed to provide new insights into designing electrochemical cells, developing electrode materials, and achieving economically viable chemical synthesis. The primary challenges associated with producing chemicals in PCECs are highlighted. Approaches to tackle these challenges are then offered, with a particular focus on deliberately designing electrode materials, aiming to achieve practically valuable product yield and energy efficiency. Finally, perspectives on the future development of PCECs for synthesizing sustainable chemicals are provided.

03 NATURAL GAS↗

Electrochemical cells for hydrogen gas production and electricity generation, and related systems and methods

An electrochemical cell comprises a first electrode, a second electrode, and a proton-conducting membrane between the first electrode and the second electrode. The first electrode comprises Pr(Co 1-x-y-z , Ni x , Mn y , Fe z )O 3-δ , wherein 0≤x≤0.9, 0≤y≤0.9, 0≤z≤0.9, and δ is an oxygen deficit. The second electrode comprises a cermet material including at least one metal and at least one perovskite. Related structures, apparatuses, systems, and methods are also described.

Ding, Dong↗

Activating nano-bulk interplays for sustainable ammonia electrosynthesis

Small changes in a catalyst’s composition, modification, and/or integration into a reactor can have significant yet often poorly understood effects on (electro)catalysis. Here we demonstrate the careful tailoring of Ru/La 0.25 Ce 0.75 O 2-x catalysts through the post-synthesized hydrothermal treatment together with control over the Ru loadings to create hydroxyl groups and electronic restructuring for ammonia electrosynthesis. When integrated into a protonic ceramic electrolyzer, the in situ formed Ce 3+ -OH/Ru sites facilitate both the N≡N decoupling and N—H formation at 400 °C and 1 bar of N 2 , boosting the ammonia production rate (2.92 mol h -1 m -2 ) up to 100-fold higher than the current state-of-the-art electrolyzers. Moreover, such catalysts and electrolyzer design concepts can be readily tuned to more complex applications such as coproducing ammonia and other chemicals with hydrocarbons as direct hydrogen sources. Here, the creation of coordinated saturated support –OH/metal sites in the advanced electrolyzer offers an attractive approach for future clean-energy and green-chemical industries.

03 NATURAL GAS↗

Chemical looping based ammonia production - A promising pathway for production of the noncarbon fuel

Ammonia, primarily made with Haber–Bosch process developed in 1909 and winning two Nobel prizes, is a promising noncarbon fuel for preventing global warming of 1.5 °C above pre-industrial levels. However, the undesired characteristics of the process, including high carbon footprint, necessitate alternative ammonia synthesis methods, and among them is chemical looping ammonia production (CLAP) that uses nitrogen carrier materials and operates at atmospheric pressure with high product selectivity and energy efficiency. To date, neither a systematic review nor a perspective in nitrogen carriers and CLAP has been reported in the critical area. So, this work not only assesses the previous results of CLAP but also provides perspectives towards the future of CLAP. It classifies, characterizes, and holistically analyzes the fundamentally different CLAP pathways and discusses the ways of further improving the CLAP performance with the assistance of plasma technology and artificial intelligence (AI).

30 DIRECT ENERGY CONVERSION↗

Methods for carbon dioxide hydrogenation

A method of carbon dioxide hydrogenation comprises introducing gaseous water to a positive electrode of an electrolysis cell comprising the positive electrode, a negative electrode, and a proton-conducting membrane between the positive electrode and the negative electrode. The proton-conducting membrane comprises an electrolyte material having an ionic conductivity greater than or equal to about 10-2 S/cm at one or more temperatures within a range of from about 150° C. to about 650° C. Carbon dioxide is introduced to the negative electrode of the electrolysis cell. A potential difference is applied between the positive electrode and the negative electrode of the electrolysis cell to generate hydrogen ions from the gaseous water that diffuses through the proton-conducting membrane and hydrogenates the carbon dioxide at the negative electrode. A carbon dioxide hydrogenation system is also described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanostructured carbon as highly efficient and stable anodes for ethylene production and power generation in protonic ceramic electrochemical cells

Protonic ceramic electrochemical cells (PCECs) have the potential in reducing the energy input and carbon emissions in ethylene production from ethane dehydrogenation. The performance of conventional perovskite-based anode materials for ethane conversion in PCECs is limited by their low active surface area and proneness to coke deposition. In this work, for the first time, we demonstrate the use of aligned carbon nanotube forests (CNTFs) as a novel anode material for an ethane fueled PCEC to co-produce ethylene and electricity. The CNTF electrode was grown on the electrolyte by the chemical vapor deposition (CVD) method. Highly dispersed iron carbide nanoparticles are formed in situ on the CNTFs during the CVD process, acting as highly active catalysts for ethane dehydrogenation. The novel PCECs show superior catalytic and electrochemical performances to that using conventional perovskite-based anodes. The cell also exhibits excellent durability and anti-coking abilities within 100 h test. This work showcases the promising application of nanostructured carbon, a new class of non-perovskite materials, as the multifunctional electrode materials for PCECs.

03 NATURAL GAS↗

HydroGEN Overview: A Consortium on Advanced Water Splitting Materials

HydroGEN is a multi-lab consortium focused on early-stage R&D in H2 production, supported by the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Hydrogen and Fuel Cell Technologies Office (HFTO). The consortium advances research and development (R&D) of innovative materials for advanced water splitting (AWS) technologies to enable clean, sustainable and low-cost ($1/kg H2) hydrogen production and fosters cross-cutting innovation using theory-guided applied materials R&D to advance all emerging water-splitting pathways for hydrogen production.

advanced water splitting technologies↗