Engineering topics

Ding, Jia

Publications and source records attributed to Ding, Jia.

7 records

DOE OSTI2024

VOPO 4 cathode for sodium ion batteries

An electrode comprising a space group Pna2 1 VOPO 4 lattice, capable of electrochemical insertion and release of alkali metal ions, e.g., sodium ions. The VOPO 4 lattice may be formed by solid phase synthesis of KVOPO 4 , milled with carbon particles to increase conductivity. A method of forming an electrode is provided, comprising milling a mixture of ammonium metavanadate, ammonium phosphate monobasic, and potassium carbonate; heating the milled mixture to a reaction temperature, and holding the reaction temperature until a solid phase synthesis of KVOPO 4 occurs; milling the KVOPO 4 together with conductive particles to form a conductive mixture of fine particles; and adding binder material to form a conductive cathode. A sodium ion battery is provided having a conductive NaVOPO 4 cathode derived by replacement of potassium in KVOPO 4 , a sodium ion donor anode, and a sodium ion transport electrolyte. The VOPO 4 , preferably has a volume greater than 90 Å 3 per VOPO 4 .

Whittingham, M. Stanley↗

DOE OSTI2023

Review of Carbon Support Coordination Environments for Single Metal Atom Electrocatalysts (SACS)

This topical review focuses on the distinct role of carbon support coordination environment of single-atom catalysts (SACs) for electrocatalysis. The article begins with an overview of atomic coordination configurations in SACs, including a discussion of the advanced characterization techniques and simulation used for understanding the active sites. A summary of key electrocatalysis applications is then provided. These processes are oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), nitrogen reduction reaction (NRR), and carbon dioxide reduction reaction (CO 2 RR). The review then shifts to modulation of the metal atom-carbon coordination environments, focusing on nitrogen and other non-metal coordination through modulation at the first coordination shell and modulation in the second and higher coordination shells. Representative case studies are provided, starting with the classic four-nitrogen-coordinated single metal atom (M$-$N 4 ) based SACs. Bimetallic coordination models including homo-paired and hetero-paired active sites are also discussed, being categorized as emerging approaches. The theme of the discussions is the correlation between synthesis methods for selective doping, the carbon structure–electron configuration changes associated with the doping, the analytical techniques used to ascertain these changes, and the resultant electrocatalysis performance. In conclusion, critical unanswered questions as well as promising underexplored research directions are identified.

36 MATERIALS SCIENCE↗

DOE OSTI2022

KVOPO 4 cathode for sodium ion batteries

An electrode comprising: NaVOPO 4 having orthorhombic crystalline symmetry and space group Pna2 1 , as an active intercalation host material, wherein the electrode is capable of electrochemical insertion and release of greater than one sodium ion per vanadium, wherein the NaVOPO 4 is formed by a solid phase synthesis process from a heated powdered mixture of ammonium metavanadate, ammonium phosphate monobasic, and potassium carbonate, to yield NaVOPO 4 having corner-sharing VO 6 octahedra and PO 4 tetrahedra, defining two types of tunnels comprising a first type of tunnel formed of rings of two PO 4 tetrahedra and a second type of tunnel formed of rings of three PO 4 tetrahedra and three VO 6 octahedra, followed by substitution of the potassium ions with sodium ions.

Whittingham, M. Stanley↗

DOE OSTI2022

Monocrystalline 1.7-eV MgCdTe solar cells

Monocrystalline 1.7-eV Mg 0.13 Cd 0.87 Te/Mg x Cd 1-x Te (x > 0.13) double-heterostructure (DH) solar cells with varying Mg composition in the barrier layers are grown by molecular beam epitaxy. Furthermore, a Mg 0.13 Cd 0.87 Te/Mg 0.37 Cd 0.63 Te DH solar cell featuring abrupt interfaces between barriers and absorber and the addition of a SiO 2 anti-reflective coating demonstrates open-circuit voltage (V OC ), short-circuit current density (J SC ), fill factor (FF), and device active-area efficiencies up to 1.129 V, 17.3 mA/cm 2 , 77.7% and 15.2%, respectively. The V OC and FF vary oppositely with the Mg x Cd 1-x Te barrier height indicating an optimal design of the MgCdTe DHs as a tradeoff between carrier confinement and carrier transport. Temperature-dependent V OC measurements reveal the majority of carrier recombination in the devices occurs outside the DHs, in the a-Si:H hole-contact layer and at the interface between the a-Si:H layer and the Mg x Cd 1-x Te top barrier at room temperature. Simulation results for the device with the highest efficiency show that the p-type a-Si:H layer and Mg 0.37 Cd 0.63 Te top barrier contribute 1.3 mA/cm 2 and 2.4 mA/cm 2 J SC loss, respectively.

14 SOLAR ENERGY↗

DOE OSTI2020

Vanadyl Phosphates A x VOPO 4 (A = Li, Na, K) as Multielectron Cathodes for Alkali-Ion Batteries

Vanadyl phosphates comprise a class of multielectron cathode materials capable of cycling two Li + , about 1.66 Na + , and some K + ions per redox center. In this review, structures, thermodynamic stabilities, and ion diffusion kinetics of various A x VOPO 4 (A = Li, Na, K, NH 4 ) polymorphs are discussed. Both the experimental data and first-principle calculations indicate kinetic limitations for alkali metal ions cycling, especially between for 0 ≤ x ≤ 1, and metastability of phases with x > 1. This creates challenges for multiple-ion cycling, as the slow kinetics call for nanosized particles, which being metastable and reactive with organic electrolytes are prone to side reactions. Thus, various synthesis approaches, surface coating, and transition metal ion substitution strategies are discussed here as possible ways to stabilize A x VOPO 4 structures and improve alkali metal ion diffusion. Finally, the role of advanced characterization techniques, such as X-ray absorption spectroscopy, diffraction, pair distribution function analysis and 7 Li and 31 P NMR, in understanding the reaction mechanism from both structural and electronic points of view is emphasized.

25 ENERGY STORAGE↗

DOE OSTI2020

Understanding the Gap between Academic Research and Industrial Requirements in Rechargeable Zinc-Ion Batteries

Rechargeable Zn-ion batteries (RZIBs) are considered to be promising energy storage systems for large-scale applications owing to their relatively high energy densities and inherently low costs, environmental benignity, as well as safety. With increasing interest and effort being devoted to this field, RZIBs are being tremendously advanced and are very likely to be commercialized in the near future. However, some challenges remain that need to be addressed. Moreover, reported results are quite often overstated through artificial exaggeration and cannot be translated to industrial applications as they were obtained under ideal testing conditions. Therefore, in this perspective, here we discuss key parameters that need to be carefully considered when translating laboratory-developed RZIBs into commercial reality. We also present a critical mini-review on RZIBs and devote effort to issues that are overlooked in academic research. We believe that this perspective provides new or seldom-discussed insight for future work and bridges the gap between academia and industry.

25 ENERGY STORAGE↗

DOE OSTI2020

Review of Emerging Potassium–Sulfur Batteries

Abstract This is the first review on potassium–sulfur (K–S) batteries (KSBs), which are emerging metal battery (MB) systems. Since KSBs are quite new, there are fundamental questions regarding the electrochemistry of S‐based cathode and of K metal anode, as well as the holistic aspects of full‐cell performance. The manuscript begins with a critical discussion regarding the potassium–sulfur electrochemistry and on how it differs from the much better‐known lithium–sulfur. Cathodes are discussed next, focusing on the role of sulfur structure, carbon host chemistry and porosity, and electrolytes in establishing the reversible potassium sulfide K 2 S n phase sequence, the parasitic polysulfide shuttle, pulverization‐driven capacity fade, etc. Following is a discussion of solid‐state electrolytes (SSEs), including of hybrid solid–liquid systems that show much promise. Potassium metal anodes are then critically reviewed, emphasizing electrolyte reactions to form stable versus unstable solid electrolyte interphase (SEI), covering the current understanding of potassium dendrites, and highlighting the deep‐eutectic K–Na alloying approaches for room temperature liquid anodes. The manuscript concludes with K–S batteries, focusing on cell architectures and providing quantitative performance comparisons as master plots. Unanswered scientific/technological questions are identified, emerging research opportunities are discussed, and potential experimental and simulation‐based studies that can unravel these unknowns are proposed.

Ding, Jia↗