Experimental evidence of crystal-field, Zeeman-splitting, and spin-phonon excitations in the quantum supersolid Na 2 BaCo ( PO 4 ) 2
Not Available
Engineering topics
Publications and source records attributed to Ding, Yang.
Not Available
Designing two-dimensional halide perovskites for high-performance optoelectronic applications requires deep understanding of the structure-property relationship that governs their excitonic behaviors. However, a design framework that considers both intra and interlayer structures modified by the A-site and spacer cations, respectively, has not been developed. Here, we use pressure to synergistically tune the intra and interlayer structures and uncover the structural modulations that result in improved optoelectronic performance. Under applied pressure, (BA) 2 (GA)Pb 2 I 7 exhibits a 72-fold boost of photoluminescence and 10-fold increase of photoconductivity. Based on the observed structural change, we introduce a structural descriptor χ that describes both the intra and interlayer characteristics and establish a general quantitative relationship between χ and photoluminescence quantum yield: smaller χ correlates with minimized trapped excitons and more efficient emission from free excitons. Building on this principle, we design a perovskite (CMA) 2 (FA)Pb 2 I 7 that exhibits a small χ and an impressive photoluminescence quantum yield of 59.3%.
What factors fundamentally determine the value of superconducting transition temperature T c in high temperature superconductors has been the subject of intense debate. Following the establishment of an empirical law known as Homes' law, there is a growing consensus in the community that the T c value of the cuprate superconductors is closely linked to the superfluid density (ρ s ) of its ground state and the conductivity (σ) of its normal state. However, all the data supporting this empirical law (ρ s = AσT c ) have been obtained from the ambient-pressure superconductors. In this study, we present the first high-pressure results about the connection of the quantities of ρ s and σ with T c , through the studies on the Bi 1.74 Pb 0.38 Sr 1.88 CuO 6+δ and Bi 2 Sr 2 CaCu 2 O 8+δ , in which the value of their high-pressure resistivity (ρ = 1/σ) is achieved by adopting our newly established method, while the quantity of ρs is extracted using Homes' law. In conclusion, we highlight that the T c values are strongly linked to the joint response factors of magnetic field and electric field, i.e., ρ s and σ, respectively, implying that the physics determining T c is governed by the intrinsic electromagnetic fields of the system.
Lead halide perovskite nanocrystals, such as CsPbBr 3 , exhibit efficient photoluminescence (PL) up-conversion, also referred to as anti-Stokes photoluminescence (ASPL). This is a phenomenon where irradiating nanocrystals up to 100 meV below gap results in higher energy band edge emission. Most surprising is that ASPL efficiencies approach unity and involve single-photon interactions with multiple phonons. This is unexpected given the statistically disfavored nature of multiple-phonon absorption. Here, in this study, we report and rationalize near-unity anti-Stokes photoluminescence efficiencies in CsPbBr 3 nanocrystals and attribute them to resonant multiple-phonon absorption by polarons. The theory explains paradoxically large efficiencies for intrinsically disfavored, multiple-phonon-assisted ASPL in nanocrystals. Moreover, the developed microscopic mechanism has immediate and important implications for applications of ASPL toward condensed phase optical refrigeration.
High-pressure studies on elements play an essential role in superconductivity research, with implications for both fundamental science and applications. Here we report the experimental discovery of surprisingly low pressure driving a novel germanium allotrope into a superconducting state in comparison to that for α-Ge. Raman measurements revealed structural phase transitions and possible electronic topological transitions under pressure up to 58 GPa. Based on pressure-dependent resistivity measurements, superconductivity was induced above 2 GPa and the maximum T c of 6.8 K was observed under 4.6 GPa. Interestingly, a superconductivity enhancement was discovered during decompression, indicating the possibility of maintaining pressure-induced superconductivity at ambient pressure with better superconducting performance. Density functional theory analysis further suggested that the electronic structure of Ge (oP32) is sensitive to its detailed geometry and revealed that disorder in the β-tin structure leads to a higher T c in comparison to the perfect β-tin Ge.
Abstract Low‐dimensional (low‐D) organic metal halide hybrids (OMHHs) have emerged as fascinating candidates for optoelectronics due to their integrated properties from both organic and inorganic components. However, for most of low‐D OMHHs, especially the zero‐D (0D) compounds, the inferior electronic coupling between organic ligands and inorganic metal halides prevents efficient charge transfer at the hybrid interfaces and thus limits their further tunability of optical and electronic properties. Here, using pressure to regulate the interfacial interactions, efficient charge transfer from organic ligands to metal halides is achieved, which leads to a near‐unity photoluminescence quantum yield (PLQY) at around 6.0 GPa in a 0D OMHH, [(C 6 H 5 ) 4 P] 2 SbCl 5 . In situ experimental characterizations and theoretical simulations reveal that the pressure‐induced electronic coupling between the lone‐pair electrons of Sb 3+ and the π electrons of benzene ring (lp‐π interaction) serves as an unexpected “bridge” for the charge transfer. Our work opens a versatile strategy for the new materials design by manipulating the lp‐π interactions in organic–inorganic hybrid systems.
Label-free, bond-selective imaging offers new opportunities for fundamental and applied studies in chemistry, biology, and materials science. Preventing its broader application to investigating spectrally congested specimens are issues related to low sensitivity as well as low spatial and temporal resolution. Here, we demonstrate a widefield, mid-infrared (MIR) photothermal imaging technique, called widefield Infrared Photothermal Heterodyne imaging (wIR-PHI), that massively parallelizes acquisition of MIR absorption data through use of a high-speed complementary metal-oxide-semiconductor camera. wIR-PHI possesses notable features that include: spatial resolution significantly below the MIR diffraction limit, hyperspectral imaging capabilities, high sensitivity, and ~100 ns temporal resolution. Here, the first two features are highlighted by hyperspectral imaging of proximally close poly(methyl methacrylate) (PMMA) and polystyrene (PS) nanoparticles where clear, bond-specific imaging of nanoparticles, separated by less than the MIR diffraction limit, is demonstrated. Sensitivity is highlighted by imaging individual PMMA and PS nanoparticles with radii between r = 97-556 nm. This leads to a current, peak absorption cross-section limit-of-detection of σ abs = 1.9× 10 –16 cm 2 . wIR-PHI's 100 ns temporal resolution is simultaneously demonstrated by observing the decay of photothermal contrast on individual nanoparticles on a ~200-6000 ns timescale. In whole, wIR-PHI’s dramatic increase in acquisition speed opens opportunities for future MIR kinetic imaging and spectroscopic studies of important chemical, biological, and material processes.
Low-dimensional (low-D) organic metal halide hybrids (OMHHs) have emerged as fascinating candidates for optoelectronics due to their integrated properties from both organic and inorganic components. However, for most of low-D OMHHs, especially the zero-D (0D) compounds, the inferior electronic coupling between organic ligands and inorganic metal halides prevents efficient charge transfer at the hybrid interfaces and thus limits their further tunability of optical and electronic properties. Here, using pressure to regulate the interfacial interactions, efficient charge transfer from organic ligands to metal halides is achieved, which leads to a near-unity photoluminescence quantum yield (PLQY) at around 6.0 GPa in a 0D OMHH, [(C 6 H 5 ) 4 P] 2 SbCl 5 . In situ experimental characterizations and theoretical simulations reveal that the pressure-induced electronic coupling between the lone-pair electrons of Sb 3+ and the π electrons of benzene ring (lp-π interaction) serves as an unexpected “bridge” for the charge transfer. Further, our work opens a versatile strategy for the new materials design by manipulating the lp-π interactions in organic–inorganic hybrid systems.
Key features of syntheses, involving the quaternary ammonium passivation of CsPbBr 3 nanocrystals (NCs), include stable, reproducible and large (often near-unity) emission quantum yields (QYs). The archetypical example involves didodecyl dimethyl ammonium (DDDMA + ) passivated CsPbBr 3 NCs where robust QYs stem from interactions between DDDMA + and NC surfaces. Despite widespread adoption of this synthesis, specific ligand-NC surface interactions responsible for large DDDMA + -passivated NC QYs have not been fully established. Multidimensional nuclear magnetic resonance experiments now reveal a new DDDMA + -NC surface interaction, beyond established “tightly-bound” DDDMA + interactions, which strongly affects observed emission QYs. Depending upon the existence of this new DDDMA + coordination, NC QYs vary broadly between 60% and 85%. More importantly, these measurements reveal surface passivation through unexpected didodecyl ammonium (DDA + ) that works in concert with DDDMA + , to produce near unity (i.e. >90%) QYs.
Abstract Local structures play a crucial role in the structural polyamorphism and novel electronic properties of amorphous materials, but their accurate measurement at high pressure remains a formidable challenge. In this article, we use the local structure of network-forming GeO 2 glass as an example, to present our recent approaches and advances in high-energy x-ray diffraction, high-pressure x-ray absorption fine structure, and ab initio first-principles density functional theory calculations and simulations. Although GeO 2 glass is one of the best studied materials in the field of high pressure research due to its importance in glass theory and geophysical significance, there are still some long-standing puzzles, such as the existence of appreciable distinct fivefold [5] Ge coordination at low pressure and the sixfold-plus [6+] Ge coordination at ultrahigh pressure. Our work sheds light on the origin of pressure-induced polyamorphism of GeO 2 glass, and the [5] Ge polyhedral units may be the dominant species in the densification mechanism of network-forming glasses from tetrahedral to octahedral amorphous structures.
Explore the source record for details and available documents.
We report valence transition could induce structural, insulator-metal, nonmagnetic-magnetic and superconducting transitions in rare-earth metals and compounds, while the underlying physics remains unclear due to the complex interaction of localized 4f electrons as well as their coupling with itinerant electrons. The valence transition in the elemental metal europium (Eu) still has remained as a matter of debate. Using resonant x-ray emission scattering and x-ray diffraction, we pressurize the states of 4f electrons in Eu and study its valence and structure transitions up to 160 GPa. We provide compelling evidence for a valence transition around 80 GPa, which coincides with a structural transition from a monoclinic (C2/c) to an orthorhombic phase ($Pnma$). We show that the valence transition occurs when the pressure-dependent energy gap between 4f and 5d electrons approaches the Coulomb interaction. Our discovery is critical for understanding the electrodynamics of Eu, including magnetism and high-pressure superconductivity.
Explore the source record for details and available documents.
Analogous to 2D layered transition-metal dichalcogenides, the TlSe family of quasi-one dimensional chain materials with the Zintl-type structure exhibits novel phenomena under high pressure. In the present work, we have systematically investigated the high-pressure behavior of TlInTe 2 using Raman spectroscopy, synchrotron X-ray diffraction (XRD), and transport measurements, in combination with first principles crystal structure prediction (CSP) based on evolutionary approach. We found that TlInTe2 undergoes a pressure-induced semiconductor-to-semimetal transition at 4 GPa, followed by a superconducting transition at 5.7 GPa (with T c = 3.8 K). An unusual giant phonon mode (A g ) softening appears at ~10–12 GPa as a result of the interaction of optical phonons with the conduction electrons. The high-pressure XRD and Raman spectroscopy studies reveal that there is no structural phase transitions observed up to the maximum pressure achieved (33.5 GPa), which is in agreement with our CSP calculations. In addition, our calculations predict two high-pressure phases above 35 GPa following the phase transition sequence as I4/mcm (B37) → Pbcm → Pm$\bar{3}$m (B2). Electronic structure calculations suggest Lifshitz (L1 & L2-type) transitions near the superconducting transition pressure. Furthermore, our findings on TlInTe 2 open up a new avenue to study unexplored high-pressure novel phenomena in TlSe family induced by Lifshitz transition (electronic driven), giant phonon softening, and electron–phonon coupling.
Metallization of hydrogen as a key problem in modern physics is the pressure-induced evolution of the hydrogen electronic band from a wide-gap insulator to a closed gap metal. However, due to its remarkably high energy, the electronic band gap of insulating hydrogen has never before been directly observed under pressure. Using high-brilliance, high-energy synchrotron radiation, we developed an inelastic x-ray probe to yield the hydrogen electronic band information in situ under high pressures in a diamond-anvil cell. Here, the dynamic structure factor of hydrogen was measured over a large energy range of 45 eV. The electronic band gap was found to decrease linearly from 10.9 to 6.57 eV, with an 8.6 times densification (ρ/ρ 0 ~ 8.6 ) from zero pressure up to 90 GPa.