Engineering topics

Do‐Thanh, Chi‐Linh

Publications and source records attributed to Do‐Thanh, Chi‐Linh.

8 records

DOE OSTI2023

Surpassing the Performance of Phenolate-derived Ionic Liquids in CO 2 Chemisorption by Harnessing the Robust Nature of Pyrazolonates

Superbase-derived ionic liquids (SILs) are promising sorbents to tackle the carbon challenge featured by tunable interaction strength with CO 2 via structural engineering, particularly the oxygenate-derived counterparts (e. g., phenolate). However, for the widely deployed phenolate-derived SILs, unsolved stability issues severely limited their applications leading to unfavorable and diminished CO 2 chemisorption performance caused by ylide formation-involved side reactions and the phenolate-quinone transformation via auto-oxidation. Here, in this work, robust pyrazolonate-derived SILs possessing anti-oxidation nature were developed by introducing aza-fused rings in the oxygenate-derived anions, which delivered promising and tunable CO 2 uptake capacity surpassing the phenolate-based SIL via a carbonate formation pathway (O-C bond formation), as illustrated by detailed spectroscopy studies. Further theoretical calculations and experimental comparisons demonstrated the more favorable reaction enthalpy and improved anti-oxidation properties of the pyrazolonate-derived SILs compared with phenolate anions. The achievements being made in this work provides a promising approach to achieve efficient carbon capture by combining the benefits of strong interaction strength of oxygenate species with CO 2 and the stability improvement enabled by aza-fused rings introduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Ionothermally Synthesized Nanoporous Ti 0.95 W 0.05 Nb 2 O 7 : a Novel Anode Material for High-Performance Lithium-Ion Batteries

Although TiNb 2 O 7 is regarded as a fast-rechargeable lithium-ion battery (LIB) anode material, the intrinsic poor electrochemical kinetics of TiNb 2 O 7 still dramatically impedes its development. Herein, an ionothermal synthesis-assisted doping strategy is proposed for the preparation of a new W 6+ -doped TiNb 2 O 7 material (Ti 0.95 W 0.05 Nb 2 O 7 ) with nanoporous structure (denoted as NPTWNO). The improved Li + diffusion coefficient of NPTWNO suggests that the ionic-liquid-templated nanoporous architecture improves the Li+ diffusion kinetics. The density functional theory computational study reveals that the doped W 6+ successfully boosts the electronic conductivity due to the narrowed conduction-valance bandgap resulted from charge redistribution, which is reflected by the electrochemical impedance spectroscopy data. With the simultaneously enhanced Li+ diffusivity and electronic conductivity, NPTWNO achieves fast-rechargeability in LIBs. So this work indicates the potential of ionothermal synthesis-assisted doping strategy on energy storage materials and offers NPTWNO material with promising electrochemical performance.

25 ENERGY STORAGE↗

DOE OSTI2022

Construction of Nitrogen-abundant Graphyne Scaffolds via Mechanochemistry-Promoted Cross-Linking of Aromatic Nitriles with Carbide Toward Enhanced Energy Storage

The 2D graphyne-related scaffolds linked by carbon–carbon triple bonds have demonstrated promising applications in the field of catalysis and energy storage due to their unique features including high conductivity, permanent porosity, and electron-rich properties. However, the construction of related scaffolds is still mainly limited to the cross-linking of CaC 2 with multiple substituted aromatic halogens and there is still a lack of efficient methodology capable of introducing high-concentration heteroatoms within the architectures. The development of alternative and facile synthesis procedures to afford nitrogen-abundant graphyne materials is highly desirable yet challenging in the field of energy storage, particularly via the facile mechanochemical procedure under neat and ambient conditions. Here, in this study, graphyne materials with abundant nitrogen-containing species (nitrogen content of 6.9–29.3 wt.%), tunable surface areas (43–865 m 2 g -1 ), and hierarchical porosity are produced via the mechanochemistry-driven pathway by deploying highly electron-deficient multiple substituted aromatic nitriles as the precursors, which can undergo cross-linking reaction with CaC 2 to afford the desired nitrogen-doped graphyne scaffolds efficiently. Unique structural features of the as-synthesized materials contributed to promising performance in supercapacitor-related applications, delivering high capacitance of 254.5 F g -1 at 5 mV s -1 , attractive rate performance, and good long-term stability.

25 ENERGY STORAGE↗

DOE OSTI2022

Ionothermal Synthesis of Carbon/TiO 2 Nanocomposite for Supercapacitors

A facile in-situ ionothermal strategy is designed to synthesize carbon/oxide composites with nanoporous structure. Ionic liquids play key roles in this ionothermal method as the solvents, porous structure directing templates and carbon sources. Here, the interaction between ionic liquids and oxides greatly improves the carbon yield of ionic liquids from nearly 0 to 18 wt.%. With the synergistic effects of the high electrical conductivity of the nitrogen-rich carbon species and the Ti 3+ self-doping enhanced electrical conductivity of TiO 2 , C/TiO 2 -4 composite exhibits better electrochemical performance than C/SiO 2 and C/Nb 2 O 5 do as a supercapacitor electrode material, delivering a high specific capacitance of 152.4 F g -1 at 5 mV s -1 with good capacitance retentions of 84.7%, 72.2% and 46.0% at 30, 100 and 500 mV s -1 , respectively.

36 MATERIALS SCIENCE↗

DOE OSTI2021

New-Generation Carbon-Capture Ionic Liquids Regulated by Metal-Ion Coordination

Development of efficient carbon capture-and-release technologies with minimal energy input is a long-term challenge in mitigating CO 2 emissions, especially via CO 2 chemisorption driven by engineered chemical bond construction. Herein, taking advantage of the structural diversity of ionic liquids (ILs) in tuning their physical and chemical properties, precise reaction energy regulation of CO 2 chemisorption was demonstrated deploying metal-ion-amino-based ionic liquids (MAILs) as absorbents. The coordination ability of different metal sites (Cu, Zn, Co, Ni, and Mg) to amines was harnessed to achieve fine-tuning on stability constants of the metal ion-amine complexes, acting as the corresponding cations in the construction of diverse ILs coupled with CO 2 -philic anions. The as-afforded MAILs exhibited efficient and controllable CO 2 release behavior with great reduction in energy input and minimal sacrifice on CO 2 uptake capacity. This coordination-regulated approach offers new prospects for the development of ILs-based systems and beyond towards energy-efficient carbon capture technologies.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Benzene Ring Knitting Achieved by Ambient-Temperature Dehalogenation via Mechanochemical Ullmann-Type Reductive Coupling

The current approaches capable of affording conjugated porous networks (CPNs) still rely on solution-based coupling reactions promoted by noble metal complexes or Lewis acids, on-surface polymerization conducted in ultrahigh-vacuum environment at very high temperatures (>200 °C), or mechanochemical Scholl-type reactions limited to electron-rich substrates. To develop simple and scalable approaches capable of making CPNs under neat and ambient conditions, herein, a novel and complementary method to the current oxidative Scholl coupling processes is demonstrated to afford CPNs via direct aromatic ring knitting promoted by mechanochemical Ullmann-type reactions. The key to this strategy lies in the dehalogenation of aromatic halides in the presence of Mg involving the formation of Grignard reagent intermediates. Products (Ph-CPN-1) obtained via direct C-C bond formation between 1,2,4,5-tetrabromobenzene (TBB) monomer feature high surface areas together with mesoporous architecture. The versatility of this approach is confirmed by the successful construction of various CPNs via knitting of the corresponding aromatic rings (e.g., pyrene and triphenylene), and even highly crystalline graphite product was obtained. The CPNs exhibit good electrochemical performance as the anode material in lithium-ion batteries (LIBs). Overall, this approach expands the frontiers of CPN synthesis and provides new opportunities to their scalable applications.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Perovskite Oxide–Halide Solid Solutions: A Platform for Electrocatalysts

The successful integration or hybridization of perovskite oxides with their halide cousins would enable the formation of both multi-anionic and multi-cationic solid solutions with unique metal-ion sites and synergistic properties that could potentially surpass the performance of classic perovskites. However, such solid solutions had not been produced previously owing to their distinct formation energies and different synthesis conditions. Solid solutions combining perovskite oxides with fluorides were produced in this study by mechanochemical synthesis. The obtained perovskite oxide–halide solid solutions had highly mixed elements and valences, uniform element distributions, and single-phase crystalline structures. In this work, the solid solution with an optimized combination of oxides and fluorides exhibited enhanced catalytic performance in the oxygen evolution reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Ionic Liquid–Directed Nanoporous TiNb 2 O 7 Anodes with Superior Performance for Fast–Rechargeable Lithium–Ion Batteries

Nanoporous TiNb 2 O 7 (NPTNO) material is synthesized by a sol–gel method with an ionic liquid (IL) as the nanoporous structure directing template. NPTNO exhibits a high reversible capacity of 210 mAh g –1 even at the charging rate of 50 C and an excellent cyclability of half-cell capacity retention of 74% for 1000 cycles at 5 C and LiNi 0.5 Mn 1.5 O 4 -coupled full-cell capacity retentions of 81% and 87% for 1000 cycles at 1 C and 2 C, respectively. The studies of the 1000 cycled NPTNO electrode illustrate that the IL-directed mesoporous structure can enhance the cyclability of NPTNO cells due to the alleviation of repetitive mechanical stress and volume fluctuation induced by the repetitive Li + insertion-extraction processes. The measured Li + diffusion coefficients from the galvanostatic intermittent titration technique suggest that the IL-templating strategy indeed ensures the fast rechargeability of NPTNO cells based on the fast Li + diffusion kinetics. Benefitting from the nanoporous structure, NPTNO with unhindered Li + diffusion pathways achieves a superior rate capability in the titanium-based oxide materials and the best full-cell cyclability in the TNO materials. Furthermore, the templating potential of IL is demonstrated, and the superb electrochemical performance establishes the IL-directed NPTNO as a promising anode candidate for fast-rechargeable LIBs.

25 ENERGY STORAGE↗