Search NASA⌕ Search

Engineering topics

Doehne, C. J.

Publications and source records attributed to Doehne, C. J..

Stability of Actinolite on Venus

Venus currently has a hostile surface environment with temperatures of ~460 ºC, pres-sures near 92 bars, and an atmosphere composed of super critical CO2 hosting a myriad of other potentially reactive gases (e.g., SO2, HCl, HF). However, it has been proposed that its surface may not have always been so harsh. Models suggest there may have been billions of years of clement conditions allowing an Earth-like environment with liquid water oceans. If such conditions existed, it is possible Venus formed a similar array of hydrous or aqueous minerals as seen on other planets with liquid surface water (e.g., Mars, Earth). Based on thermodynamic modeling, many of these phases would not be stable under the current atmospheric conditions on Venus, dehydrating due to the high temperatures and low concentration of H2O in the atmosphere. However, the rate of decomposition of these phases may allow them to remain present on the surface over geologic time. For example, experiments on the reaction rate of tremolite (Ca2Mg5Si8O22(OH)2) show a 50% decomposition time of 2.7 Gyr for micrometer sized grains in unreactive atmospheres (i.e., without SO2) at 740 K, and a 50% decomposition time of 70 Gyr for crystals several millimeters to centimeters in size. If hydrous minerals can remain on the surface of Venus over geologic time, it has implications for our detection of evidence of these past environments, and also for the overall water budget of the planet. If after surficial dehydration the planet was able to still store water in its crust, possible processes such as subduction or metamorphism could still have operated using stored water long after liquid surface water evaporated. Several previous studies have focused on experimental investigations of mineral stability on Venus. In particular, the works of studied the decomposition rate of tremolite under conditions relevant to Venus. As their focus was on decomposition of the mineral due to lack of water in the atmosphere, their experiments were undertaken using only CO2 or N2 gas at atmospheric pressure. Re-cent experiments have examined reactivity of other minerals with the Venusian atmosphere using more complex gas compositions at similar pressures to those seen on Venus. These studies show reaction of silicate minerals with atmospheric components on relatively short timescales (i.e., on the order of days). The reported reactions of silicate materials in both studies produced iron oxides, Ca sulfates, and Na sulfates. These ions are present in many amphiboles, and Ca was proposed by Johnson and Fegley to potentially have an important role in the decomposition mechanism for tremolite, with the Ca-O bond being the first to break during decomposition. The potential involvement of Ca in both processes raises the question of whether or not the reaction to form a secondary mineral phase will influence the rate of amphibole break-down (e.g., discussion in for tremolite). Additionally, reaction of Ca with atmospheric gases may result in a different secondary mineral assemblage than simple amphibole decomposition, which will need to be recognized when searching for evidence of past hydrated minerals on the Venusian surface. In order to understand the effect of this reaction on the overall preservation potential of amphibole on the surface of Venus, we are conducting experiments in both reactive and nonreactive atmospheres using the mineral actinolite (Ca2(Mg,Fe)5Si8O22(OH)2), an amphibole with similar crystal structure to tremolite that contains both Ca and Fe.

Santos, A. R.↗

Testing Tensile and Shear Epoxy Strength at Cryogenic Temperatures

This paper covers cryogenic, tensile testing and research completed on a number of epoxies used in cryogenic applications. Epoxies are used in many different applications; however, this research focused on the use of epoxy used to bond MLI standoffs to cryogenic storage tanks and the loads imparted to the tank through the MLI. To conduct testing, samples were made from bare stainless steel, aluminum and primed aluminum. Testing involved slowly cooling test samples with liquid nitrogen then applying gradually increasing tensile loads to the epoxy. The testing evaluated the strength and durability of epoxies at cryogenic temperatures and serves as a base for future testing. The results of the tests showed that some epoxies withstood the harsh conditions while others failed. The two epoxies yielding the best results were Masterbond EP29LPSP and Scotch Weld 2216. For all metal surfaces tested, both epoxies had zero failures for up to 11.81 kg of mass.

multilayer insulation↗

Testing Tensile and Shear Epoxy Strength at Cryogenic Temperatures

This paper covers cryogenic, tensile testing and research completed on a number of epoxies used in cryogenic applications. Epoxies are used in many different applications; however, this research focused on the use of epoxy used to bond MLI standoffs to cryogenic storage tanks and the loads imparted to the tank through the MLI. To conduct testing, samples were made from bare stainless steel, aluminum and primed aluminum. Testing involved slowly cooling test samples with liquid nitrogen then applying gradually increasing tensile loads to the epoxy. The testing evaluated the strength and durability of epoxies at cryogenic temperatures and serves as a base for future testing. The results of the tests showed that some epoxies withstood the harsh conditions while others failed. The two epoxies yielding the best results were Masterbond EP29LPSP and Scotch Weld 2216. For all metal surfaces tested, both epoxies had zero failures for up to 11.81 kg of mass..

epoxy↗