Search NASA⌕ Search

Engineering topics

Doerk, Gregory S.

Publications and source records attributed to Doerk, Gregory S..

15 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Insights into Probing the Effect of Molecular Weight of Poly(carboxybetaine methacrylate) on the Performance of Forward Osmosis Desalination

Zwitterionic polymers have proven to be a promising nonfouling material that can be applied in the design of selective layers of thin film composite (TFC) membranes. Extending the permeability and usage of TFC membranes have attracted increasing interest in membrane-based desalination processes since water-flux reduction associated with biofouling nowadays persists as a common challenge. By virtue of its strong hydration, this polymer category is very useful to counteract biofouling in marine and biomedical systems, but the benefits from their application in membrane technology are still emerging. The efficacy of the nonfouling property as a function of the polymer’s molecular weight remains unknown. In pursuit of that vision, this study fosters new scientific insights via probing different molecular weights of poly(carboxybetain methacrylate) (PCBMA) coated on the surface as a selective layer for the prepared TFC membranes. The coated zwitterionic membranes (zM) exhibited excellent performance in preventing water flux decay in a bench-scale forward osmosis system. The prepared zM membranes revealed enhanced hydrophilic properties and retained their operational water flux when compared to the control. Our results suggest that using an intermediate-size molecular weight (PCBMA M n 50,000) will result in the best operational performance. The intermediate size resulted in the lowest flux decline rate (R t ) of 0.01 ± 0.001 (zM-50) when compared to the unmodified control membrane 0.56 ± 0.071 (M0) after using a model BSA foulant solution. Furthermore, all coated membranes exhibited similar trends in the observed reverse salt flux profiles, as well. In conclusion, the constructed zM membranes will serve as a model to develop further selective layers in the construction of TFC membranes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Assembling Vertical Block Copolymer Nanopores via Solvent Vapor Annealing on Homopolymer-Functionalized Substrates

Utilizing the self-assembly of block copolymers with large Flory–Huggins interaction parameters (χ) for nanofabrication is a formidable challenge due to the attendant large surface energy differences between the blocks. This work reports a robust protocol for the fabrication of thin films with highly ordered cylindrical nanopore arrays via the self-assembly of an asymmetric poly(styrene-block-4-vinylpyridine) (PS-b-P4VP) diblock copolymer blended with a P4VP homopolymer. The desired vertical domain orientation is achieved at the air–polymer interface by controlled solvent vapor annealing (SVA) using acetone, a solvent with weak selectivity for PS over P4VP, and at the substrate interface by functionalization using a hydroxy-terminated poly(2-vinylpyridine) (P2VP-OH) homopolymer brush. In contrast, the vertical cylinder orientation is unstable during acetone SVA on substrates functionalized using hydroxy-terminated poly(methyl methacrylate) (PMMA-OH). Although PMMA exhibits more balanced interfacial energies between PS and P4VP than P2VP in the dry state, it is also swollen more selectively by acetone. We hypothesize that the nearly balanced solvent swelling of the three polymers (P2VP, P4VP, and PS) stabilizes the vertical cylinder orientation, while unbalanced swelling (PMMA > P4VP and PS) does not. Here we further characterize pore formation by addition of a P4VP homopolymer and its postassembly extraction using ethanol, revealing a narrow window of pore size tunability. Notably, minimal differences in nanopore morphologies are observed for P4VP volume fractions as high as 0.1, regardless of the P4VP molar mass. However, further increasing the P4VP volume fraction results in domain reorientation or macrophase separation when its molar mass is less than or greater than the P4VP block molar mass, respectively. Using a P4VP homopolymer that is nearly equal in length to the P4VP block enables the fabrication of well-ordered arrays of vertical, through-film nanopores with high aspect ratios (>10), small periods (<23 nm), and diameters less than 10 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Engineering Self-Assembled Domain Asymmetry in Solvent Vapor Annealed Block Copolymer–Homopolymer Blend Films

Thin-film block copolymer (BCP) self-assembly is a powerful approach to generate highly uniform nanopatterns across large areas, yet the symmetries of these nanopatterns are constrained by the relative volume occupied by each polymer block. Here, we present a conceptually new approach to circumvent this limitation by combining homopolymer (HP) blending with solvent vapor annealing (SVA), demonstrated here for ternary blends of a near-symmetric BCP with athermal, low molar mass HPs. Screening of BCP–HP interactions by a weakly selective solvent promotes entropically driven delocalization of HP throughout both blocks and enables assembly of metastable lamellae for volume fractions as high as 0.78. Subsequent brief thermal annealing induces HPs to withdraw to their enthalpically favored domains, sharpening domain interfaces on a time scale much shorter than pattern coarsening. This renders lamellar nanopatterns with tunable widths that can be transferred to other materials with high fidelity. Furthermore, the persistence of the metastable asymmetric lamellae upon thermal annealing is sensitive to film confinement, as they are preserved in submonolayer films but transition to horizontal cylinders in films more than one monolayer thick. SVA using a strongly selective solvent results in assembled morphologies aligned closely with expectations based on the total polymer blend composition, underscoring the key role of BCP–HP interactions in dictating domain asymmetry. Overall, this work details important principles for using SVA to mediate BCP–HP interactions in thin films, thereby presenting opportunities to engineer pathways for the assembly of well-ordered nanopatterns with designer feature asymmetry for lithographic or nanotexturing applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Diversifying self-assembled phases in block copolymer thin films via blending

Block copolymer (BCP) thin films readily self-assemble into intricate nanoscale morphologies, with structure dictated by chain architecture. As the field searches for more control over structure formation, it is natural to investigate more sophisticated control mechanisms, such as synthesizing more complex chain architectures or applying directing fields. We review the use of a simple but powerful method for controlling self-assembly: blending of BCPs with homopolymers or other BCPs. Blending enables tailoring ordering kinetics, the spatial distribution of chains throughout the film thickness, and the nanoscale morphology itself. Blending is thus emerging as a remarkably simple and powerful means of tailoring self-assembled morphologies.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Responsive blends of block copolymers stabilize the hexagonally perforated lamellae morphology

Blends of block copolymers can form phases and exhibit features distinct from the constituent materials. Herein we study thin film blends of cylinder-forming and lamellar-forming block copolymers across a range of substrate surface energies. Blend materials are responsive to interfacial energy, allowing selection of pure or coexisting phases based on surface chemistry. Blending stabilizes certain motifs that are typically metastable, and can be used to generate pure hexagonally perforated lamellar thin films across a range of film thicknesses and surface energies. This tolerant behavior is ascribed to the ability of blend materials to redistribute chains to stabilize otherwise high-energy defect structures. The blend responsiveness allows the morphology to be spatially defined through multi-tone chemical surface patterns.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Autonomous discovery of emergent morphologies in directed self-assembly of block copolymer blends

The directed self-assembly (DSA) of block copolymers (BCPs) is a powerful approach to fabricate complex nanostructure arrays, but finding morphologies that emerge with changes in polymer architecture, composition, or assembly constraints remains daunting because of the increased dimensionality of the DSA design space. Here, we demonstrate machine-guided discovery of emergent morphologies from a cylinder/lamellae BCP blend directed by a chemical grating template, conducted without direct human intervention on a synchrotron x-ray scattering beamline. This approach maps the morphology-template phase space in a fraction of the time required by manual characterization and highlights regions deserving more detailed investigation. These studies reveal localized, template-directed partitioning of coexisting lamella- and cylinder-like subdomains at the template period length scale, manifesting as previously unknown morphologies such as aligned alternating subdomains, bilayers, or a “ladder” morphology. This work underscores the pivotal role that autonomous characterization can play in advancing the paradigm of DSA.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Hierarchical, Self-Assembled Metasurfaces via Exposure-Controlled Reflow of Block Copolymer-Derived Nanopatterns

Here, nanopatterning for the fabrication of optical metasurfaces entails a need for high-resolution approaches like electron beam lithography that cannot be readily scaled beyond prototyping demonstrations. Block copolymer thin film self-assembly offers an attractive alternative for producing periodic nanopatterns across large areas, yet the pattern feature sizes are fixed by the polymer molecular weight and composition. Here, a general strategy is reported that overcomes the limitation of fixed feature size by treating the copolymer thin film as a hierarchical resist, in which the nanoscale pattern motif is defined by self-assembly. Feature sizes can then be tuned by thermal reflow controlled locally by irradiative crosslinking or chemical alteration using lithographic ultraviolet light or electron beam exposure. Using blends of polystyrene-block-poly(methylmethacrylate) (PS-b-PMMA) with PS and PMMA homopolymer, we demonstrate both self-assembled PS grating and hexagonal hole patterns; exposure-controlled reflow is then used to reduce hole diameter by as much as 50% or increase PS grating linewidth by more than 180%. Transferring these nanopatterns, or their inverse obtained by a lift-off approach, into silicon yields structural colors that may be prescriptively controlled based on nanoscale feature size. Furthermore, patterned exposure enables area-selective feature size control, yielding uniform structural color patterns across centimeter square areas. Electron beam lithography is also used to show that the lithographic resolution of this selective-area control can be extended to the nanoscale dimensions of the self-assembled features. The exposure-controlled reflow approach demonstrated here takes a pivotal step towards fabricating complex, hierarchical optical metasurfaces using scalable self-assembly methods.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Thin film block copolymer self-assembly for nanophotonics

The nanophotonic engineering of light–matter interactions has profoundly changed research behind the design and fabrication of optical materials and devices. Metasurfaces—arrays of subwavelength nanostructures that interact resonantly with electromagnetic radiation—have emerged as an integral nanophotonic platform for a new generation of ultrathin lenses, displays, polarizers and other devices. Their success hinges on advances in lithography and nanofabrication in recent decades. While existing nanolithography techniques are suitable for basic research and prototyping, issues of cost, throughput, scalability, and substrate compatibility may preclude their use for many metasurface applications. Patterning via spontaneous self-assembly of block copolymer thin films offers an enticing alternative for nanophotonic manufacturing that is rapid, inexpensive, and applicable to large areas and diverse substrates. This review discusses the advantages and disadvantages of block copolymer-based nanopatterning and highlights recent progress in their use for broadband antireflection, surface enhanced Raman spectroscopy, and other nanophotonic applications. Here recent advances in diversification of self-assembled block copolymer nanopatterns and improved processes for enhanced scalability of self-assembled nanopatterning using block copolymers are also discussed, with a spotlight on directions for future research that would enable a wider array of nanophotonic applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Film Thickness and Composition Effects in Symmetric Ternary Block Copolymer/Homopolymer Blend Films: Domain Spacing and Orientation

We report thickness and homopolymer molar mass dependencies in thin film blends of a compositionally symmetric 75 kg/mol lamellar polystyrene-block-poly(methyl methacrylate) diblock copolymer (PS-b-PMMA) with near-equal volume fractions of PS and PMMA homopolymers on “neutral” surfaces that promote a vertical domain orientation. PS and PMMA homopolymers with equal molar masses of 1, 3, and 22 kg/mol are blended in a 1:1 mass ratio. To efficiently explore this parameter space, we prepared combinatorial samples with gradient homopolymer concentrations using electrospray deposition (ESD) and gradient film thicknesses using flow coating; these samples were subsequently characterized by grazing-incidence small-angle X-ray scattering and scanning electron microscopy, respectively. Our results demonstrate that the added homopolymers increase or reduce domain spacings with respect to the neat (unblended) block copolymer depending on their molar masses, in line with previous reports; a simple heuristic to estimate the domain scaling in ternary blends based on the homopolymer molar mass agrees well with data for the thinnest blend films studied here. More surprisingly, we observe that the measured domain spacing in blends also depends on film thickness, with thicker films exhibiting larger domain spacings than thinner films at the same homopolymer concentration. Furthermore, thickness gradients at fixed homopolymer concentrations reveal a change in lamellae orientation from vertical to horizontal as film thickness is increased beyond the nominal lamellar domain spacing. Coarse-grained molecular dynamics simulations indicate that this change in orientation is induced by homopolymer segregation to film surfaces. Finally, tying these effects together, we hypothesize that the observed dependence of domain spacing on film thickness is a consequence of changes in the vertical homopolymer composition profile in thicker films during lamellae reorientation and the conformational asymmetry between PMMA and PS segments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Gaussian processes for autonomous data acquisition at large-scale synchrotron and neutron facilities

The execution and analysis of complex experiments are challenged by the vast dimensionality of the underlying parameter spaces. Although an increase in data-acquisition rates should allow broader querying of the parameter space, the complexity of experiments and the subtle dependence of the model function on input parameters remains daunting owing to the sheer number of variables. New strategies for autonomous data acquisition are being developed, with one promising direction being the use of Gaussian process regression (GPR). GPR is a quick, non-parametric and robust approximation and uncertainty quantification method that can be applied directly to autonomous data acquisition. We review GPR-driven autonomous experimentation and illustrate its functionality using real-world examples from large experimental facilities in the USA and France. We introduce the basics of a GPR-driven autonomous loop with a focus on Gaussian processes, and then shift the focus to the infrastructure that needs to be built around GPR to create a closed loop. Finally, the case studies we discuss show that Gaussian-process-based autonomous data acquisition is a widely applicable method that can facilitate the optimal use of instruments and facilities by enabling the efficient acquisition of high-value datasets.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Autonomous materials discovery driven by Gaussian process regression with inhomogeneous measurement noise and anisotropic kernels

Abstract A majority of experimental disciplines face the challenge of exploring large and high-dimensional parameter spaces in search of new scientific discoveries. Materials science is no exception; the wide variety of synthesis, processing, and environmental conditions that influence material properties gives rise to particularly vast parameter spaces. Recent advances have led to an increase in the efficiency of materials discovery by increasingly automating the exploration processes. Methods for autonomous experimentation have become more sophisticated recently, allowing for multi-dimensional parameter spaces to be explored efficiently and with minimal human intervention, thereby liberating the scientists to focus on interpretations and big-picture decisions. Gaussian process regression (GPR) techniques have emerged as the method of choice for steering many classes of experiments. We have recently demonstrated the positive impact of GPR-driven decision-making algorithms on autonomously-steered experiments at a synchrotron beamline. However, due to the complexity of the experiments, GPR often cannot be used in its most basic form, but rather has to be tuned to account for the special requirements of the experiments. Two requirements seem to be of particular importance, namely inhomogeneous measurement noise (input-dependent or non-i.i.d.) and anisotropic kernel functions, which are the two concepts that we tackle in this paper. Our synthetic and experimental tests demonstrate the importance of both concepts for experiments in materials science and the benefits that result from including them in the autonomous decision-making process.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Controlling Drug Absorption, Release, and Erosion of Photopatterned Protein Engineered Hydrogels

A protein-engineered triblock copolymer hydrogel composed of two self-assembling domains (SADs) has been fabricated by a photoactivatable diazirine group followed by ultraviolet (UV)-mediated crosslinking. The photocrosslinkable protein polymer CEC-D has been patterned into various features including different micrometer-scale stripes by using lithographic techniques. The patterned hydrogels are important for encapsulation of small molecules where a photopatterned fraction of 50% is optimal for maximum absorption. Stripe-patterned CEC-D 100–100 exhibits slightly lower swelling ratios, an 8.9 times lower erosion profile, and a 2.6-fold higher drug release compared to the unpatterned hydrogel control, CEC-D0. Our studies demonstrate the potential of photocrosslinkable protein polymer hydrogels to be used as scaffolds for therapeutic delivery of small molecules. Furthermore, through photolithographic techniques on the protein hydrogel, a variety of functionalities can be achieved by patterning different features enabling the mimicry of biological systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Advances in Kriging-Based Autonomous X-Ray Scattering Experiments

Autonomous experimentation is an emerging paradigm for scientific discovery, wherein measurement instruments are augmented with decision-making algorithms, allowing them to autonomously explore parameter spaces of interest. We have recently demonstrated a generalized approach to autonomous experimental control, based on generating a surrogate model to interpolate experimental data, and a corresponding uncertainty model, which are computed using a Gaussian process regression known as ordinary Kriging (OK). We demonstrated the successful application of this method to exploring materials science problems using x-ray scattering measurements at a synchrotron beamline. Here, we report several improvements to this methodology that overcome limitations of traditional Kriging methods. The variogram underlying OK is global and thus insensitive to local data variation. We augment the Kriging variance with model-based measures, for instance providing local sensitivity by including the gradient of the surrogate model. As with most statistical regression methods, OK minimizes the number of measurements required to achieve a particular model quality. However, in practice this may not be the most stringent experimental constraint; e.g. the goal may instead be to minimize experiment duration or material usage. We define an adaptive cost function, allowing the autonomous method to balance information gain against measured experimental cost. We provide synthetic and experimental demonstrations, validating that this improved algorithm yields more efficient autonomous data collection.

36 MATERIALS SCIENCE↗