Engineering topics

Dohnalek, Zdenek

Publications and source records attributed to Dohnalek, Zdenek.

11 records

DOE OSTI2024

Programmable Catalyst Structures via Adsorbate-Induced Adatom Assembly

The electronic structure and geometric configuration of oxide-supported metal ions are important coordination properties that can be related to catalytic activity and stability. Herein, we interrogate the coordination environment of mononuclear Pd ions supported on ceria using CO adsorption, infrared vibrational spectroscopy, and DFT modeling. We observed the 15 h continuous co-evolution of a palladium- (2167 cm -1 ) and cerium-carbonyl (2177 cm -1 ) complex by monitoring the $\nu$(CO) infrared region. The slow CO adsorption kinetics were caused by the reactive ligand exchange between an oxygen atom of the support and the CO adsorbate to yield an oxygen vacancy and adsorbed CO 2 . We hypothesize that the co-evolved cerium-carbonyl complex was formed upon CO adsorption at or adjacent to this oxygen vacancy. Our hypothesis was experimentally supported by a dramatic attenuation of the cerium carbonyl signal upon pre-adsorption of water through an apparent competitive adsorption mechanism. The attenuation was also accompanied by a 6 cm -1 redshift of the palladium carbonyl band (2161 cm -1 ) attributed to hydrogen bonding between the carbonyl and a nearby hydroxyl. Characteristic n(CO) stretch frequencies catalogued through CO adsorption onto single crystal ceria by Wöll et al.1 led us to index the cerium carbonyl to the {100} nanofacet of the polycrystalline ceria support. It follows from the observed co-evolution of the two carbonyl complexes that Pd was also adsorbed at the {100} nanofacet. Redeployment of a previously developed DFT model by Ivanova-Shor et al.2 featuring square-planar coordination of Pd2+ at the {100} nanofacet (O 4 Pd) of a Ce 21 O 42 nanoparticle model qualitatively reproduced several experimental observations.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Exploration of methods to remove implanted 210 Pb and 210 Po contamination from silicon surfaces

Radioactive contaminants on the surfaces of detector components can be a problematic source of background events for physics experiments searching for rare processes. Exposure to radon is a specific concern because it can result in the relatively long-lived 210 Pb (and progeny) being implanted to significant subsurface depths such that removal is challenging. Here, in this article, we present results from a broad exploration of cleaning treatments to remove implanted 210 Pb and 210 Po contamination from silicon, which is a material frequently used in rare-events searches. We demonstrate for the first time that heat treatments (“baking”) can effectively mitigate such surface contamination, with a 1200 °C bake resulting in a 97$^{+2}_{-3}$% reduction. We also report results using wet-chemistry and plasma-based methods, which show that etching can be highly effective provided the etch depth is sufficiently aggressive. Our survey of cleaning methods suggests consideration of multiple approaches during the different phases of detector construction to enable greater flexibility for efficient removal of 210 Pb and 210 Po surface contamination.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2022

Preparation and Characterization of Model Homotopic Catalysts: Rh Adatoms, Nanoparticles, and Mixed Oxide Surfaces on Fe 3 O 4 (001)

The atomic-level characterization of active sites is essential to understanding the mechanisms behind catalytic reactions. In this study, using scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS), we follow the morphological changes of a model Rh catalysts supported on Fe 3 O 4 (001) as a function of temperature and Rh coverage. Here, we identify the preparation conditions leading to model catalysts containing homotopic or nearly homotopic Rh species bound as adatoms, small clusters, substitutional within the Fe 3 O 4 (001), and nanoparticles. Adsorbates such as CO and CO 2 are further subsequently used to characterize the properties of different Rh sites. Using temperature programmed desorption (TPD), we demonstrate that adatoms, clusters, and nanoparticles exhibit high-temperature CO desorption (250-600 K). Strong binding on such sites further allows for CO oxidation to CO 2 via the Mars-van-Krevelen mechanism. In contrast, CO 2 was found to interact weakly with all Rh sites. Differences in desorption temperature enable the use of CO and CO 2 as titration methods for nanoparticles and Fe 3 O 4 (001), respectively. A small quantity of CO 2 was found to be reduced to CO on Rh adatoms and clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Adsorption of ethane, ethene, and ethyne on reconstructed Fe 3 O 4 (001)

The adsorption of the C2 hydrocarbons including ethane, ethene, and ethyne are studied on magnetite Fe 3 O 4 (001) by a combination of molecular beam dosing, temperature programmed desorption, and X-ray photoelectron spectroscopy. The ethane desorption profile has a single temperature invariant peak at 100 K while ethene and ethyne exhibit additional peaks at ~120 K and ~135 K. An inversion analysis is used to extract coverage dependent desorption energies as well as coverage-averaged prefactors for each molecule. Ethene and ethyne exhibit moderate coverage dependent desorption energies decreasing from ~80 to ~30 kJ/mol at saturation while ethane shows a relatively coverage invariant desorption energy ~28 kJ/mol. The desorption energies of the C2 hydrocarbons increase in order of increasing bond order. This is likely due to the enhanced interaction of the ethene and ethyne p system to the coordinatively unsaturated octahedral Fe sites (Fe oct ) on the ¬oxide surface. The saturation coverages of each C2 hydrocarbon at 82 K were also determined. Furthermore, these match well with the 2-dimensional spacing determined from their liquid densities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Binding and stability of MgO monomers on anatase TiO 2 (101)

In catalysis, MgO is often used to modify the acid-base properties of support oxides and to stabilize supported metal atoms and particles on oxides. In this study, we show how the sublimation of MgO powder can be used to deposit MgO monomers, hither on anatase TiO 2 (101). A combination of X-ray electron spectroscopy, high-resolution scanning tunneling microscopy, and density functional theory is employed to gain insight into the MgO monomer binding, electronic and vibrational properties, and thermal stability. In the most stable configuration, the Mg and O of the MgO monomer bind to two surface oxygens and one undercoordinated surface titanium, respectively. The additional binding weakens the Mg-O monomer bond and makes the Mg more ionic. The monomers are thermally stable up to 650 K, where the onset of diffusion into the TiO 2 bulk is observed. Finally, the monomeric MgO species on TiO 2 (101) represent an ideal, atomically precise system with modified acid-base properties and will be employed in our future catalytic studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Formation of Gas-Phase Allyl Radicals from Glycerol on Rutile TiO2(110)

The reaction pathways of glycerol on partially reduced TiO2(110) have been studied by a combination of molecular beam dosing and temperature-programmed desorption (TPD). Glycerol is found to bind more strongly to TiO2(110) than glycols due to an additional hydroxyl group in the molecule. When the Ti surface sites are saturated by glycerol, the majority of glycerol molecules (~ 95%) undergo further reactions to yield carbon-free (water and hydrogen) and carbon-containing products that are desorbed during the TPD ramp. In contrast to glycols for which both water and hydrogen arise exclusively from the cleavage of glycol O-H bonds, we identify two distinct reaction channels resulting from the cleavage of O-H and C-H bonds, respectively, for both water and hydrogen evolution from glycerol on TiO2(110). Quantitative determination of the desorption yields of water and hydrogen reveals that the C-H bond scission channel which occurs at higher temperature than the O-H bond scission channel, is a minor reaction channel for water formation, while it is a major reaction channel responsible for hydrogen evolution. For the carbon-containing products, we exclude both carbon deposition and carbon oxides (CO and CO2) formation, and identify the allyl radical as the major carbon-containing product. The formation of the allyl radical is accompanied by the formation of various minor carbon-containing products including propylene, acrolein, allyl alcohol, acetone, formaldehyde and ethylene. The different surface chemistries observed between glycerol and simpler alcohols and glycols on TiO2(110), suggest that smaller oxygenates cannot serve as models for larger oxygenates in probing their reaction pathways on oxide surfaces. The new reaction channels observed for glycerol on TiO2(110) may open up a new way to convert bio-renewable glycerol directly to pure hydrogen and hydrocarbons on TiO2. This work was supported by the US Department of Energy, Office of Sciences, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences, and performed in EMSL, a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multiprogram national laboratory operated for the DOE by Battelle.

Chen, Long↗

DOE OSTI2020

Binding of Formic Acid on Anatase TiO2(101)

The adsorption of formic acid (FA) and the formation of formate species on metal oxide surfaces are of great interest in catalysis. Formic acid is used to probe the adsorption properties of surface sites and formates are common intermediates in many catalytic reactions. Here we focus on the interaction of FA with a prototypical anatase TiO2(101) surface by using a combination of scanning tunneling microscopy (STM), infrared reflection absorption spectroscopy (IRAS), electron stimulated desorption (ESD), and density functional theory (DFT) to assess the coverage dependent evolution of different FA-derived surface species at low temperatures (80–240 K). We find that isolated FA adsorbs at 80 K in both monodentate (MD) and bidentate (BD) configurations on top of undercoordinated Ti sites (Ti5c). The MD form is likely deprotonated and readily converts upon annealing to bridging BD on two neighboring Ti5c sites. DFT calculations show that molecularly-bound MD FA is metastable and readily converts into a deprotonated state in the proximity of subsurface oxygen vacancy. The stability of the MD species increases as the availability of the paired Ti5c sites for BD formation diminishes at high coverages. Upon surface saturation, a mixed configuration of alternating bidentate and monodentate species with coverage of 2/3 FA/Ti5c represents the most favorable configuration. This is in contrast with the adsorption of FA on rutile TiO2(110) and many other oxides, where bidentate formate species dominate. Y.W., A.D., G.A.K., R.R., N.G.P., and Z.D. were supported by the U.S. Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences (BES), Division of Chemical Sciences, Geosciences and Biosciences (CSGB) under FWP 47319. B.W. and A.S. acknowledge the support of DOE BES, CSGB Division under Award DESC0007347. The experimental studies were performed in EMSL, a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multiprogram national laboratory operated for DOE by Battelle. The authors also acknowledge computational resources from the TIGRESS high-performance computer center at Princeton University.

Wang, Yang↗

DOE OSTI2019

Adsorption and Reaction of Methanol on Anatase TiO2(101) Single Crystals and Faceted Nanoparticles

Anatase TiO2 is used extensively in a wide range of heterogeneous and photocatalysis processes. As such, understanding its interactions with prototypical organics such as methanol is of high importance. In this study, we employ a cross-disciplinary approach and study adsorption and dissociation of methanol on the (101) surfaces of anatase TiO2 single crystals (SCs) and faceted nanoparticles (F-NPs). While scanning tunneling microscopy was used to follow the spatial distribution of adsorbed methanol molecules and methoxy and hydroxy species on SC TiO2(101), comparative temperature programmed desorption and infrared reflection absorption spectroscopy measurements were performed on both SC and F-NP TiO2(101). We find that adsorption of molecular methanol at 80 K on SC TiO2(101) leads to the formation of chains along the titania rows. These chains are metastable and fall apart upon annealing due to the repulsion of neighboring molecules. Further, we find that on SC TiO2(101) methanol deprotonates to produce neighboring methoxy and hydroxyl groups following the annealing of high coverages to room temperature (RT). The coverage of methoxy and hydroxyl groups can be increased with repeated adsorption and annealing cycles, and the annealing above room temperature leads to the recombinative desorption of methanol. On F-NP TiO2(101) surfaces, we find that methanol adsorbs both molecularly and dissociatively at RT. With increasing temperature, molecularly adsorbed methanol gradually converts to methoxy. Therefore, parallel behavior in adsorption and surface reaction is found on both SC and F-NP TiO2(101). An added layer of complexity for the latter is that Ti-OH groups on the nanoparticle surfaces, likely associated with defects, also play an important role in methanol adsorption and surface reaction.

oxides, alcohols, adsorption, scanning, tunneling,↗

DOE OSTI2019

Understanding Heterolytic H2 Cleavage and Water-Assisted Hydrogen Spillover on Fe3O4(001)-Supported Single Palladium Atoms

The high specific activity, novel properties, and cost effectiveness of single-atom catalysts (SAC) hold great promise and allow for new chemistry in numerous reactions. Here, we focus on fundamental understanding of the critical step in hydrogenation reactions, H2 activation, on a model SAC catalyst comprised of single Pd atoms on reconstructed Fe3O4(001). Using a combination of scanning tunneling microscopy and density functional theory we demonstrate that H2 dissociates heterolytically, ultimately yielding hydroxyls on, and excess charge in, the Fe3O4 support. The hydrogenation can be carried out to high coverages and ultimately leads to lifting of the Fe3O4 reconstruction and Pd reduction and destabilization. Water plays an important role in reduction of the hydrogen diffusion barrier, thereby facilitating redistribution of hydroxyls away from Pd. Our study demonstrates a distinct H2 activation mechanism on single Pd atoms and shows the importance of a reducible support that can facilitate charge transport away from the active site.

Doudin, Nassar M.↗

DOE OSTI2019

Understanding the Binding of Aromatic Hydrocarbons on Rutile TiO2(110)

The adsorption of cyclohexane, benzene, and alkyl-substituted benzene derivatives is studied on rutile TiO2(110) by a combination of molecular beam dosing, temperature programmed desorption, and density functional theory (DFT). An inversion analysis is used to extract the coverage dependent desorption energies from TiO2(110). The values of the suitable prefactors are derived from simple statistical mechanical models assuming different limits in the adsorbate mobility on the surface. The prefactor values determined using the vibrational frequencies from DFT calculations corroborate this analysis and show that the adsorbates are mobile in 1- or 2-dimensions on corrugated TiO2(110) surface. The adsorption of benzene derivatives is found to be dominated by the dative Lewis acid-base interactions of the p system with the surface Ti ions. While the desorption energy generally increases with increasing the length and the number of substituents, the difference between the desorption energies decreases as the number and length of substituents is increased. This is a consequence of the destabilization of the optimum bonding configuration of the benzene ring and the alkyl groups with their increasing length and number. The absolute saturation coverages of uncompressed layers correspond approximately to one molecule per two Ti5c sites and decrease slightly with increasing molecule size in a good agreement with van der Waals sizes of the molecules.

Chen, Long↗

DOE OSTI2018

Hydrogen Adsorption and Reaction on RuO2(110)

Ruthenium dioxide is used extensively as a co-catalyst in a wide range of photocatalytic water splitting systems. As such, understanding how it promotes the evolution of hydrogen and oxygen is of high importance. In this study, we employ scanning tunneling microscopy to study the adsorption and reaction of hydrogen on a model RuO2(110) surface. We find that at low coverages H2 dissociates heterolytically to hydride-hydroxyl pairs even at 5 K. The onset temperature for the low coverage H2 dissociation is surprising as it is not expected based on prior temperature programmed desorption studies. At higher coverages, H2 chemisorbs molecularly on bare ruthenium sites that are neighboring the hydride-hydroxyl pairs. Upon annealing, the chemisorbed H2 disappears by 120 K, primarily due to H2 desorption from the surface. Further annealing between 120 K and 295 K leads to the conversion of hydride species to bridging hydroxyls. The bridging hydroxyls ultimately recombine between 450 and 600 K to form water yielding clean RuO2(110) with oxygen vacancies.

Dahal, Arjun P.↗