Engineering topics

Dominik, Chet J.

Publications and source records attributed to Dominik, Chet J..

5 records

NASA NTRS1997

Parametric Investigation of a High-Lift Airfoil at High Reynolds Numbers

A new two-dimensional, three-element, advanced high-lift research airfoil has been tested in the NASA Langley Research Center s Low-Turbulence Pressure Tunnel at a chord Reynolds number up to 1.6 x 107. The components of this high-lift airfoil have been designed using a incompressible computational code (INS2D). The design was to provide high maximum-lift values while maintaining attached flow on the single-segment flap at landing conditions. The performance of the new NASA research airfoil is compared to a similar reference high-lift airfoil. On the new high-lift airfoil the effects of Reynolds number on slat and flap rigging have been studied experimentally, as well as the Mach number effects. The performance trend of the high-lift design is comparable to that predicted by INS2D over much of the angle-of-attack range. However, the code did not accurately predict the airfoil performance or the configuration-based trends near maximum lift where the compressibility effect could play a major role.

Lin, John C.↗

NASA NTRS1995

Optimization of an Advanced Design Three-Element Airfoil at High Reynolds Numbers

New high-lift components have been designed for a three-element advanced high-lift research airfoil using a state-of-the-art computational method. The new components were designed with the aim to provide high maximum-lift values while maintaining attached flow on the single-segment flap at approach conditions. This three-element airfoil has been tested in the NASA Langley Low-Turbulence Pressure Tunnel at chord Reynolds number up to 16 million. The performance of the NASA research airfoil is compared to a reference advanced high-lift research airfoil. Effects of Reynolds number on slat and flap rigging have been studied experimentally. The performance trend of this new high-lift design is comparable to that predicted by the computational method over much of the angle of attack range. Nevertheless, the method did not accurately predict the airfoil performance or the configuration-based trends near maximum lift.

Lin, John C.↗

NASA NTRS1993

Multielement airfoil performance due to Reynolds and Mach number variations

Experimental studies have been conducted to assess Reynolds and Mach number effects on a supercritical multielement airfoil. The airfoil is representative of the stall-critical station of an advanced transport wing design. The experimental work was conducted as part of a cooperative program between the Douglas Aircraft Company and the NASA Langley Research Center to improve current knowledge of high-lift flows and to develop a validation data base with practical geometries/conditions for emerging computational methods. This article describes results obtained for both landing and takeoff multielement airfoils (four- and three-element configurations) for a variety of Mach/Reynolds number combinations up to flight conditions. Effects on maximum lift are considered for the landing configurations, and effects on both lift and drag are reported for the takeoff geometry. The present test results revealed considerable maximum lift effects on the three-element landing configuration for Reynolds number variations, and significant Mach number effects on the four-element airfoil.

Valarezo, Walter O.↗

NASA NTRS1992

Reynolds and Mach number effects on multielement airfoils

Experimental studies were conducted to assess Reynolds and Mach number effects on a supercritical multielement airfoil. The airfoil is representative of the stall-critical station of an advanced transport wing design. The experimental work was conducted as part of a cooperative program between the Douglas Aircraft Company and the NASA LaRC to improve current knowledge of high-lift flows and to develop a validation database with practical geometries/conditions for emerging computational methods. This paper describes results obtained for both landing and takeoff multielement airfoils (four and three-element configurations) for a variety of Mach/Reynolds number combinations up to flight conditions. Effects on maximum lift are considered for the landing configurations and effects on both lift and drag are reported for the takeoff geometry. The present test results revealed considerable maximum lift effects on the three-element landing configuration for Reynolds number variations and significant Mach number effects on the four-element airfoil.

Valarezo, Walter O.↗

NASA NTRS1991

Multi-element airfoil optimization for maximum lift at high Reynolds numbers

An experimental study has been performed to assess the maximum lift capability of a supercritical multielement airfoil representative of an advanced transport aircraft wing. The airfoil model was designed with a leading-edge slat and single or two-segment trailing-edge flaps. Optimization work was performed at various slat/flap deflections as well as gap/overhang positions. Landing configurations and the attainment of maximum lift coefficients of 4.5 with single-element flaps and 5.0 with two-segment flaps was emphasized. Test results showed a relatively linear variation of the optimum gap/overhang positioning of the slat versus slat deflection, considerable differences in optimum rigging between single and double segment flaps, and large Reynolds number effects on multielement airfoil optimization.

Valarezo, Walter O.↗