Search NASA⌕ Search

Engineering topics

Dong, Xiaorui

Publications and source records attributed to Dong, Xiaorui.

Automated reaction kinetics and network exploration (Arkane): A statistical mechanics, thermodynamics, transition state theory, and master equation software

The open-source statistical mechanics software described here, Arkane–Automated Reaction Kinetics and Network Exploration–facilitates computations of thermodynamic properties of chemical species, high-pressure limit reaction rate coefficients, and pressure-dependent rate coefficient over multi-well molecular potential energy surfaces (PES) including the effects of collisional energy transfer on phenomenological kinetics. Arkane can use estimates to fill in information for molecules or reactions where quantum chemistry information is missing. The software solves the internal energy master equation for complex unimolecular reaction systems. Inputs to the software include converged electronic structure computations performed by the user using a variety of supported software packages (Gaussian, Molpro, Orca, TeraChem, Q-Chem, Psi4). The software outputs high-pressure limit rate coefficients and pressure-dependent phenomenological rate coefficients, as well as computed thermodynamic properties (enthalpy, entropy, and constant pressure heat capacity) with added energy corrections. Some of the key features of Arkane include treatment of 1D, 2D or ND hindered internal rotation modes, treatment of free internal rotation modes, quantum tunneling effect consideration, transition state theory (TST) and Rice-Ramsperger-Kassel-Marcus (RRKM) rate coefficient computations, master equation solution with four implemented methods, inverse-Laplace transform of high-pressure limit rate coefficients into the energy domain, energy corrections based on bond-additivity or isodesmic reactions, automated and efficient PES exploration, and PES sensitivity analysis. The present work describes the design of Arkane, how it should be used, and refers to the theory that it employs. Arkane is distributed via the RMG-Py software suite (https://github.com/ReactionMechanismGenerator/RMG-Py).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A wide range experimental and kinetic modeling study of the oxidation of 2,3-dimethyl-2-butene: Part 1

2,3-Dimethyl-2-butene (TME) is a potential fuel additive with high research octane number (RON) and octane sensitivity (S), which can improve internal combustion engine performance and efficiency. However, the combustion characteristics of TME have not been comprehensively investigated. Thus, it is essential to study the combustion characteristics of TME and construct a detailed chemical kinetic model to describe its combustion. In this paper, two high-pressure shock tubes and a constant-volume reactor are used to measure ignition delay times and laminar flame speeds of TME oxidation. Further, the ignition delay times were measured at equivalence ratios of 0.5, 1.0, and 2.0 in “air”, at pressures of 5 and 10 bar, in the temperature range of 950 – 1500 K. Flame speeds of the TME/ “air” mixtures were measured at atmospheric pressure, at a temperature of 325 K, for equivalence ratios ranging from 0.78 to 1.31. Two detailed kinetic mechanisms were constructed independently using different methodologies; the KAUST TME mechanism was constructed based on NUIGMech1.1, and the MIT TME mechanism was built using the Reaction Mechanism Generator (RMG). Both mechanisms were used to simulate the experimental results using Chemkin Pro. In the present work, reaction flux and sensitivity analyses were performed using the KAUST mechanism to determine the critical reactions controlling TME oxidation at the conditions studied.

33 ADVANCED PROPULSION SYSTEMS↗

Automatically generated model for light alkene combustion

Light alkenes are common combustion intermediates for a variety of fuels. Therefore, understanding their oxidation and pyrolysis chemistry is key to building detailed mechanisms for heavier fuels. This work was focused on the development and evaluation of a detailed kinetic mechanism suitable for the combustion of light alkenes up to C 4 without the use of tuned parameters, instead, the parameter values come from first principles or direct measurements. The generated mechanism accurately estimates the laminar burning velocity (S u ) and ignition delay time (IDT) of light alkenes available in the literature, which represent fundamental combustion properties at a wide range of conditions. Because each parameter is thought to have a physically realistic value, not tuned to these measurements, the new model could be used as a sub-mechanism in models for other applications. The reaction network was generated with the open-source Reaction Mechanism Generator (RMG) software. Sensitivity analyses were performed under wide ranges of temperatures and pressures, allowing for the identification of the most impactful species and reactions. Based on these, a comprehensive thermochemistry database, including calculations on 550 molecules performed in this work at the CBS-QB3 level of theory, and a kinetic library, including theoretically-derived reaction rates retrieved from the literature, were built and used in the mechanism generation. The developed mechanism was compared against several existing detailed kinetic mechanisms for ethene, propene, 1-butene, 2-butene, and isobutene. Here, the newly generated model is the most accurate among the ones analyzed, in terms of fractional bias and normalized mean square error. Hence, this new model was used to analyze the chemistry of alkene combustion. Key rate coefficients were compared, to identify the cause of deviations between the models and possible areas for further improvements.

09 BIOMASS FUELS↗

Development of a high temperature pyrolysis mechanism for cyclopentanone, a potential biofuel derived from biomass

Cyclopentanone (CPO) is a promising biofuel for spark-ignition engines due to its ring strain and high auto-ignition resistance. The Department of Energy has identified CPO as a potential biofuel candidate because of its unique chemical properties. Understanding CPO decomposition is crucial to building a high-temperature combustion model. In this study, we present a comprehensive kinetic model for high-temperature pyrolysis of CPO with verified results from high-pressure shock tube (HPST) measurements. The time histories of carbon monoxide (CO), ethylene (C2H4), and CPO absorbances over the temperature range of 1156-1416 K and 8.53-10.06 atm were measured. A corresponding kinetic model was generated using the Reaction Mechanism Generator (RMG) with the parameters of dominant pathways from either previous studies or quantum calculation within current work. The final model containing 821 species and 79,859 reactions exhibited a good agreement with the experimental results. In this study, the C2H4/CO ratio was used as an essential factor to validate the model and to prove that radical-involved bimolecular pathways were as significant as unimolecular decomposition of CPO. The rate of production (ROP) analysis showed that H radicals play major roles in both primary reactions and product pyrolysis. The insights from this work can be used to generate a better CPO combustion model and help evaluate CPO as a biofuel. Such understanding can also be helpful when proposing pyrolysis or combustion models for other biofuels.

cyclopentanone, reaction mechanism, pyrolysis, sho↗

Revealing the critical role of radical-involved pathways in high temperature cyclopentanone pyrolysis

Cyclopentanone (CPO) is a promising biofuel for spark-ignition engines due to its ring strain and high auto-ignition resistance. Understanding CPO decomposition is crucial for building a high-temperature combustion model. Here we present a comprehensive kinetic model for high-temperature pyrolysis of CPO with verified results from high-pressure shock tube (HPST) measurements. The time- histories of carbon monoxide (CO), ethylene (C 2 H 4 ), and CPO absorbances over the temperature range of 1156-1416 K and pressure range of 8.53-10.06 atm were measured during current experiments. A corresponding detailed kinetic model was generated using the Reaction Mechanism Generator (RMG) with dominant unimolecular/radical-involved decomposition pathways from either previous studies or quantum calculations within the current work. The obtained model containing 821 species and 79,859 reactions exhibited a good agreement with the experimental results. In this study, the absorbance ratio between C 2 H 4 and CO was used as an important factor to validate models and to prove that radical-involved bimolecular pathways were as significant as unimolecular decomposition of CPO. The rate of production (ROP) analysis showed H radicals play a major role in the decomposition, and the whole decomposition process could be divided into three stages based on the H radical concentration. Finally, the insights from present work can be used to generate a better CPO combustion model and help evaluate CPO as an advanced biofuel.

09 BIOMASS FUELS↗

Study on preparation and luminescent properties of Eu{sup 3+}-doped LaAlO{sub 3} and GdAlO{sub 3}

Graphical abstract: The optical property of Eu{sup 3+} ions is seriously influenced by the two kinds of host materials of LaAlO{sub 3} and GdAlO{sub 3}, especially the charge transfer (CT) band energy of Eu{sup 3+}-O{sup 2-}. We have discussed it in detail based on experiments and quantitative calculations. Highlights: Black-Right-Pointing-Pointer Ln{sub 1-x}AlO{sub 3}:Eu{sub x}{sup 3+} (Ln = La, Gd) phosphors were prepared by sol-gel method. Black-Right-Pointing-Pointer The optical properties of Ln{sub 1-x}AlO{sub 3}:Eu{sub x}{sup 3+} (Ln = La, Gd) phosphors have been investigated in detail. Black-Right-Pointing-Pointer We quantitatively calculated the bond lengths and bond covalency of Gd-O and La-O bonds. Black-Right-Pointing-Pointer The calculated charge transfer energies of Eu{sup 3+}-doped LnAlO{sub 3} (Ln = La, Gd) are in good agreement with our experimental results. -- Abstract: Eu{sup 3+}-doped trigonal LaAlO{sub 3} and orthorhombic GdAlO{sub 3} phosphors have been successfully synthesized by sol-gel method. The crystallization processes of the phosphors have been characterized by X-ray diffraction (XRD) and thermogravimetry-differential scanning calorimetry (TG-DSC). The optical properties of these phosphors were investigated using the photoluminescence (PL) and photoluminescence excitation (PLE) spectra. The influences of the different structures and bonding of the hosts on the luminescence performance of Eu{sup 3+} ion-doped LaAlO{sub 3} and GdAlO{sub 3} were investigated in detail based on chemical bond theory. Under appropriate UV-radiation, the reddish orange light emitted from GdAlO{sub 3}:Eu{sup 3+} was brighter than that from LaAlO{sub 3}:Eu{sup 3+}. Such a brightly luminescent phosphor could be considered as an ideal optical material for the development of new optical display systems.

36 MATERIALS SCIENCE↗