Search NASA⌕ Search

Engineering topics

Donovan, Patrick Mark

Publications and source records attributed to Donovan, Patrick Mark.

Los Alamos National Laboratory Double Shell Program Target Development

The Double Shell Program at Los Alamos National Laboratory is studying an alternative platform for achieving robust alpha-particle heating at the National Ignition Facility. Double shells benefit from having a low convergence ratio and lower predicted temperature for achieving volume ignition. The joint required to assemble a double shell has an imperfection in the outer shell that seeds instabilities that can greatly impact the inner capsule’s implosion at bang time. Furthermore, different variations of the shape and placement of the joint were implemented with improvements in the quality of the machining leading to measurable improvements in yield. High-Z coatings on the outer joint mitigated the impact of the 1- to 2-μm gap sometimes found in double shell assemblies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The temperatures of ejecta transporting in vacuum and gases

In this work, we measure continuous thermal radiance from evolving clouds of liquid metal fragments ejected into vacuum, nonreactive, and reactive gas. We implement a model for the thermalization of the ejecta and gas and use this to constrain the absolute temperature of the ejecta cloud. This model enables further analyses of ejecta thermal behavior under a variety of conditions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A temperature profile diagnostic for radiation waves on OMEGA-60

Predicting and matching radiation wave propagation with computational models has proven difficult. Information provided by experiments studying radiation flow has been limited when only radiation breakout is measured. We have developed the COAX (co-axial) diagnostic platform to provide spatial temperature profiles of a radiation wave through low density foams as a more detailed constraint for simulations. COAX uses a standard, laser-driven OMEGA-60 halfraum to drive radiation down a titanium-laden silicon oxide foam. Point-projection X-ray absorption spectroscopy perpendicular to the radiation flow measures the spatial profile of titanium ionization. The spectroscopic measurement utilizes a broadband capsule backlighter. Imaging and streak spectroscopy are used to characterize the size and spectrum of this source. Radiography provides an additional constraint by capturing the developing shock as the radiation flow becomes subsonic. The DANTE diagnostic is used to measure the halfraum temperature. Here, we provide a spectroscopic analysis of COAX data to determine temperature, and we describe experimental sources of uncertainty. The temperature is obtained by comparison to multi-temperature synthetic spectra post-processed from radiation-hydrodynamics simulations. Quantitative comparison between data and synthetic spectra generated from temperature profiles at relevant simulation times enable determination of a peak temperature of 114 ± 8 eV at 265 ± 22.4 μm from the halfraum. This represents an improvement over the temperature uncertainties of previous radiation flow experiments. Further refinements to the spectroscopic analysis could achieve ±4 eV. The combination between space-resolved spectroscopy and radiography enables us to determine the distance from the halfraum of both the radiation front and the shock front at the time of measurement. For the example shown in this paper the radiation front position is 600–630 μm at 3.43 ± 0.16 ns and the shock front position is 633 μm at 3.3 ± 0.24 ns.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Shock-driven hydrodynamic instability of a sinusoidally perturbed, high-Atwood number, oblique interface

A shock incident on an interface will cause any initial perturbations on that interface to grow. When the shock front is parallel to the interface, the perturbations grow due to the Richtmyer-Meshkov (RM) process. When there is some tilt between the shock front and the interface, shear flow will result across the postshock interface. Recent experiments on the OMEGA EP laser have studied the hydrodynamic instability growth which results from a supported shock interacting with a sinusoidally perturbed, oblique interface. The observed instability growth was dominated by Richtmyer-Meshkov at early times but became Kelvin-Helmholtz (KH)-like at late times. Previously, this instability growth was described using an analytic model for the deposition of baroclinic vorticity on the interface by a shock combined with a discrete vortex model. Here, we utilize the same baroclinic vorticity deposition model in conjunction with a desingularized, periodic Birkhoff-Rott equation to model instability evolution. The Birkhoff-Rott equation takes into account the vorticity distribution along the interface, whereas the discrete vortex model assumed that all vorticity over each wavelength of the perturbation is confined to a point. We compare the new model to xRAGE simulations and experiments. In conclusion, the model is found to overpredict both the instability growth and shear across the interface by about a factor of two, but correctly predicts that the growth is RM-like at early times and KH-like at late times.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shock-driven discrete vortex evolution on a high-Atwood number oblique interface

Here, we derive a model describing vorticity deposition on a high-Atwood number interface with a sinusoidal perturbation by an oblique shock propagating from a heavy into a light material. Limiting cases of the model result in vorticity distributions that lead to Richtmyer-Meshkov and Kelvin-Helmholtz instability growth. For certain combinations of perturbation amplitude, wavelength, and tilt of the shock, a regime is found in which discrete, co-aligned, vortices are deposited on the interface. The subsequent interface evolution is described by a discrete vortex model, which is found to agree well with both RAGE simulations and experiments at early times.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Machining Specific Fourier Power Spectrum Profiles into Plastics for High Energy Density Physics Experiments [Machining Specific Fourier Power Spectrum Profiles into Plastics for HEDP Experiments]

In this paper, the High Energy Density Physics program at Los Alamos National Laboratory (LANL) has had a multiyear campaign to verify the predictive capability of the interface evolution of shock propagation through different profiles machined into the face of a plastic package with an iodine-doped plastic center region. These experiments varied the machined surface from a simple sine wave to a double sine wave and finally to a multitude of different profiles with power spectrum ranges and shapes to verify LANL’s simulation capability. The MultiMode-A profiles had a band-pass flat region of the power spectrum, while the MultiMode-B profile had two band-pass flat regions. Another profile of interest was the 1-Peak profile, a band-pass concept with a spike to one side of the power spectrum. All these profiles were machined in flat and tilted orientations of 30 and 60 deg. Tailor-made machining profiles, supplied by experimental physicists, were compared to actual machined surfaces, and Fourier power spectra were compared to see the reproducibility of the machining process over the frequency ranges that physicists require.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗