Donya Ramezanian | Search NASA

NASA NTRSDate not supplied

Sensitivity to Snapshot Frequency in the POD-Based Reduced-Order Modeling of Flow over a Gaussian Bump

The flow over a Gaussian bump at a Reynolds number of 10^6, based on the bump length and freestream conditions, and a Mach number of 0.2, was simulated using wall-modeled large eddy simulation (WMLES). The incoming turbulent flow exhibits relaminarization upstream of the bump apex, due to the favourable pressure gradient acceleration induced by the bump curvature, as well as separation, reattachment and a detached shear layer downstream of the apex. A Galerkin reduced-order model (ROM) was then constructed using a proper orthogonal decomposition (POD) modal basis. The complex, three-dimensional flow features are captured by spatial POD modes differently based on the frequency of the high-fidelity snapshots originally provided. POD modes constructed from differently sampled snapshot matrices were then truncated to retain 90% of the turbulence kinetic energy in the domain of interest. A parametric study is conducted to evaluate the effect of the frequency of snapshots used to construct the POD-ROM.

turbulence↗

NASA NTRSDate not supplied

Quantifying Emergent Fluid Dynamics Using Reynolds-Interpolated Fluid Reduced-order Models

Fluid reduced-order models (ROMs) which capture the flow physics within the problem's physical domain are usually constrained in accuracy to only the parameter points, e.g. Reynolds and Mach numbers, at which reference data was provided. Interpolation-focused quantity-of-interest ROMs are often structured differently and fail to provide flow volume data with the same quality - if at all. In this paper, techniques which reside at the intersection of these two ROM schools - flow physics ROMs which can be interpolated within a parameter space of interest - are explored. Using a combination of existing and novel techniques, emergent physics are identified using a fluid ROM at parameter points which are not provided in the ROM's training data.

uncertainty quantification↗

NASA NTRSDate not supplied

Low-cost Quantification of Fluid Flow Parameter Sensitivity using Reduced-order Modeling

Uncertainty quantification of computational fluid dynamics (CFD) simulations is a complicated procedure which still relies in many cases on engineering judgment and factors of safety. This is in part because the computational cost of measuring the simulation's sensitivity to all meaningful parameters (e.g., body surface roughness) and hyperparameters (e.g., subiteration convergence criterion) is intractable for even a single simulation. Reduced-order modeling dramatically lowers this computational cost of simulating fluid flows, but usually only where similar data is already available. In this work, fluid reduced-order models are utilized to quantify a flow's sensitivity to certain physical parameters for the purposes of improved uncertainty quantification. Characteristic observability and sensitivity are both explored. The resulting sensitivity quantifications enable more informed CFD frameworks and more rigorous uncertainty bounds on the resulting data.

uncertainty quantification↗

NASA NTRSDate not supplied

Application of an Affine Nonlinear Galerkin Reduced-order Model to Compressible Fluid Flows

Galerkin reduced-order models (ROMs) often struggle to accurately capture multiscale fluid physics in challenging flow regimes such as flows experiencing compressibility effects. This in part stems from the global nature of both the basis construction problem and the spectral formulation itself. In this work, a multi-basis ROM is developed in an affine space based on proper orthogonal decomposition (POD) by projecting the full Navier-Stokes equations expressed in terms of the specific volume, velocity, and pressure primitive variables. The model is applied to high-fidelity numerical simulation datasets obtained for a canonical compressible flow configuration: the flow over a backward facing step at different subsonic Mach numbers. It is observed that application of an eigenvalue reassignment (ER) stabilization method is required to avoid early divergence of the ROM predictions for this configuration in the three Mach numbers tested. The sensitivity of the POD-ROM results to the choice of parameters in the stabilization algorithm is discussed.

reduced-order model↗

NASA NTRSDate not supplied

Low-cost Quantification of Fluid Flow Parameter Sensitivity using Reduced-order Modeling

Uncertainty quantification of computational fluid dynamics (CFD) simulations is a complicated procedure which still relies in many cases on engineering judgment and factors of safety. This is in part because the computational cost of measuring the simulation's sensitivity to all meaningful parameters (e.g., body surface roughness) and hyperparameters (e.g., subiteration convergence criterion) is intractable for even a single simulation. Reduced-order modeling dramatically lowers this computational cost of simulating fluid flows, but usually only where similar data is already available. In this work, fluid reduced-order models are utilized to quantify a flow's sensitivity to certain physical parameters for the purposes of improved uncertainty quantification. Characteristic observability and sensitivity are both explored. The resulting sensitivity quantifications enable more informed CFD frameworks and more rigorous uncertainty bounds on the resulting data.

uncertainty quantification↗

NASA NTRSDate not supplied

Application of an Affine Nonlinear Galerkin Reduced-order Model to Compressible Fluid Flows

Galerkin reduced-order models (ROMs) often struggle to accurately capture multiscale fluid physics in challenging flow regimes such as flows experiencing compressibility effects. This in part stems from the global nature of both the basis construction problem and the spectral formulation itself. In this work, a multi-basis ROM is developed in an affine space based on proper orthogonal decomposition (POD) by projecting the full Navier-Stokes equations expressed in terms of the specific volume, velocity, and pressure primitive variables. The model is applied to high-fidelity numerical simulation datasets obtained for a canonical compressible flow configuration: the flow over a backward facing step at different subsonic Mach numbers. It is observed that application of an eigenvalue reassignment (ER) stabilization method is required to avoid early divergence of the ROM predictions for this configuration in the three Mach numbers tested. The sensitivity of the POD-ROM results to the choice of parameters in the stabilization algorithm is discussed.

reduced-order model↗

NASA NTRSDate not supplied

Quantifying Emergent Fluid Dynamics Using Reynolds-Interpolated Fluid Reduced-order Models

Fluid reduced-order models (ROMs) which capture the flow physics within the problem's physical domain are usually constrained in accuracy to only the parameter points, e.g. Reynolds and Mach numbers, at which reference data was provided. Interpolation-focused quantity-of-interest ROMs are often structured differently and fail to provide flow volume data with the same quality - if at all. In this paper, techniques which reside at the intersection of these two ROM schools - flow physics ROMs which can be interpolated within a parameter space of interest - are explored. Using a combination of existing and novel techniques, emergent physics are identified using a fluid ROM at parameter points which are not provided in the ROM's training data.

uncertainty quantification↗