Search NASA⌕ Search

Engineering topics

Douglas, M. R.

Publications and source records attributed to Douglas, M. R..

Experimental quantification of the impact of heterogeneous mix on thermonuclear burn

In inertial confinement fusion, deuterium–tritium (DT) fuel is brought to densities and temperatures where fusion ignition occurs. However, mixing of the ablator material into the fuel may prevent ignition by diluting and cooling the fuel. MARBLE experiments at the National Ignition Facility provide new insight into how mixing affects thermonuclear burn. These experiments use laser-driven capsules containing deuterated plastic foam and tritium gas. Embedded within the foam are voids of known sizes and locations, which control the degree of heterogeneity of the fuel. Initially, the reactants are separated, with tritium concentrated in the voids and deuterium in the foam. During the implosion, mixing occurs between the foam and gas materials, leading to DT fusion reactions in the mixed region. Here, it is shown that by measuring the ratios of DT and deuterium–deuterium neutron yields for different macropore sizes and gas compositions, the effects of mix heterogeneity on thermonuclear burn may be quantified, supporting an improved understanding of these effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Results from single-shock Marble experiments studying thermonuclear burn in the presence of heterogeneous mix on the National Ignition Facility

The Marble campaign on the National Ignition Facility investigates the effect of heterogeneous mix on thermonuclear burn for comparison to a probability distribution function (PDF) burn model. Marble utilizes plastic capsules filled with deuterated plastic foam and a fill gas containing tritium. As the capsules implode, the deuterium in the foam mixes with the tritium gas, and DT neutrons are produced as the shocks compress and heat the mixture. The yield of DT neutrons is dependent on the uniformity of the mix, with more heterogeneous mix producing fewer neutrons. In Marble, the heterogeneity of the mix is controlled by varying the diameter of voids introduced into the foam. The first NIF Marble campaign has been executed in which the Marble capsules were indirectly driven with a single strong shock using NIF hohlraums. The experiments produce a low-convergence, high-ion-temperature implosion. The ratio of DT to DD neutron yield is largely consistent with uniform atomic mix for fine-pore foam, and increases slightly with void diameter, contrary to 1D simulations using the PDF burn model. Recent 3D high-resolution simulations of similar experiments performed on the Omega Laser Facility suggest an explanation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Progress toward NIF opacity measurements

The opacities of iron and other mid-Z elements help to regulate the transport of energy in the sun. Recent experiments on the Sandia National Laboratories Z machine have shown large discrepancies between the measured and calculated opacities of iron at certain solar conditions. To replicate these opacity measurements a platform is being developed on the National Ignition Facility to measure the opacities of iron and other elements at the same conditions as in the Z experiments. The NIF platform consists of a hohlraum to heat the opacity sample to the desired conditions, a separate backlighter to radiograph the sample, and a spectrometer to give the spectrally resolved opacity. Not only must the opacity be measured but the temperature and density of the sample must also be accurately determined. This platform has now produced its first iron transmission measurements. Overall, these measurements will be presented along with plans for future measurements and details on how the measurements will be improved.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Progress in the development of the MARBLE platform for studying thermonuclear burn in the presence of heterogeneous mix on OMEGA and the National Ignition Facility

Mix of ablator material into fuel of an ICF capsule adds non-burning material, diluting the fuel and reducing burn. The amount of the reduction is dependent in part on the morphology of the mix. A probability distribution function (PDF) burn model has been developed [6] that utilizes the average concentration of mixed materials as well as the variance in this quantity across cells provided by the BHR turbulent transport model [3] and its revisions [4] to describe the mix in terms of a PDF of concentrations of fuel and ablator material, and provides the burn rate in mixed material. Work is underway to develop the MARBLE ICF platform for use on the National Ignition Facility in experiments to quantify the influence of heterogeneous mix on fusion burn. This platform consists of a plastic (CH) capsule filled with a deuterated plastic foam (CD) with a density of a few tens of milligrams per cubic centimeter, with tritium gas filling the voids in the foam. This capsule will be driven using x-ray drive on NIF, and the resulting shocks will induce turbulent mix that will result in the mixing of deuterium from the foam with the tritium gas. In order to affect the morphology of the mix, engineered foams with voids of diameter up to 100 microns will be utilized. The degree of mix will be determined from the ratio of DT to DD neutron yield. As the mix increases, the yield from reactions between the deuterium of the CD foam with tritium from the gas will increase. Lastly, the ratio of DT to DD neutrons will be compared to a variation of the PDF burn model that quantifies reactions from initially separated reactants.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mach stem hysteresis: Experiments addressing a novel explanation of clumpy astrophysical jet emission

Recent time-series observations of shock waves in stellar jets taken with the Hubble Space Telescope reveal localized bright knots that persist over nearly 15 years. While some of these features represent shock fronts caused by variable velocities in the flow, others appear at the intersection points between distinct bow shocks. Theoretically, when the angle between two intersecting shocks exceeds a certain critical value, a third shock (Mach stem) should form. Because Mach stems form perpendicular to the direction of flow, incoming particles encounter a normal shock instead of an oblique one, which results in brighter emission at this location. In order to study this phenomenon in a controlled laboratory setting, we have carried out experiments on the Omega laser aimed at understanding the formation, growth, and destruction of Mach stems in the warm dense plasma regime. Our experimental results indicate how the growth rate depends upon included angle, and numerical simulations indicate that it may be possible to stabilize an already-formed Mach stem below the critical angle when certain conditions are satisfied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The outer solar system for 200 million years

A special-purpose computer is used to integrate the orbits of the outer five planets for more than 100 Myr into the future and more than 100 Myr into the past. The strongest features in the Fourier transforms of the orbital elements of the Jovian planets can be identified with the frequencies predicted by linear secular theory. Many of the weaker features in the Fourier spectra are identified as linear combinations of the basic frequencies. Serious differences are noted between the present measurements and the predictions of Bretagnon (1974). The amplitude of the 3.796 Myr period libration of Pluto's longitude of perihelion is modulated with a period of 34 Myr. Very long periods, on the order of 137 Myr, are also seen. The orbit of Pluto is stable for the duration of the integration; the maximum Liapunov characteristic exponent is less than 10 to the -6.8 power/yr.

Applegate, J. H.↗

A digital Orrery

The Orrery, a special computer for high-speed high-precision orbital mechanics computations has been designed and built. On the problems the Orrery was designed to solve, it achieves approximately 10 Mflops in about 1 cu ft of space while consuming 150 W of power. The specialized parallel architecture of the Orrery, which is well matched to orbital mechanics problems, is the key to obtaining such high performance. In this paper the design, construction, and programming of the Orrery is discussed.

Applegate, J. H.↗