Engineering topics

Dow, Marvin B.

Publications and source records attributed to Dow, Marvin B..

14 records

NASA NTRS1997

Development of Stitched, Braided and Woven Composite Structures in the ACT Program and at Langley Research Center

Summary results are presented from the research conducted on woven, braided, knitted and stitched (textile) composites at the Langley Research Center and under the NASA Advanced Composites Technology (ACT) Program in the period from 1985 to 1997. The report also includes an annotated bibliography of 270 U.S. publications on textile composites (with their abstracts). Two major research areas are discussed: (1) the general research in textile composites performed throughout the period under the direction of the Langley Research Center and (2) the development of textile composite aircraft structures by industry under the NASA ACT Program. The annotated bibliography is organized in three subsections: (1) general textiles R&D under the auspices of Langley, (2) ACT Program development of textile structural components, and (3) textiles research by individuals and organizations not associated with the ACT Program. An author index is provided for the reports and documents.

Dow, Marvin B.↗

NASA NTRS1993

The effects of aircraft fuel and fluids on the strength properties of Resin Transfer Molded (RTM) composites

The resin transfer molding (RTM) process offers important advantages for cost-effective composites manufacturing, and consequently has become the subject of intense research and development efforts. Several new matrix resins have been formulated specifically for RTM applications in aircraft and aerospace vehicles. For successful use on aircraft, composite materials must withstand exposure to the fluids in common use. The present study was conducted to obtain comparative screening data on several state-ofthe-art RTM resins after environmental exposures were performed on RTM composite specimens. Four graphite/epoxy composites and one graphite/bismaleimide composite were tested; testing of two additional graphite epoxy composites is in progress. Zero-deg tension tests were conducted on specimens machined from eight-ply (+45-deg, -45-deg) laminates, and interlaminar shear tests were conducted on 32-ply 0-deg laminate specimens. In these tests, the various RTM resins demonstrated widely different strengths, with 3501-6 epoxy being the strongest. As expected, all of the matrix resins suffered severe strength degradation from exposure to methylene chloride (paint stripper). The 3501-6 epoxy composites exhibited about a 30 percent drop in tensile strength in hot, wet tests. The E905-L epoxy exhibited little loss of tensile strength (less than 8 percent) after exposure to water. The CET-2 and 862 epoxies as well as the bismaleimide exhibited reduced strengths at elevated temperature after exposure to oils and fuel. In terms of the percentage strength reductions, all of the RTM matrix resins compared favorably with 3501-6 epoxy.

Falcone, Anthony↗

NASA NTRS1992

Damage-Tolerant Composites Made By Stitching Carbon Fabrics

Work conducted at NASA Langley Research Center to investigate stitching combined with resin transfer molding to make composites more tolerant of damage and potentially cost competitive with metals. Composite materials tailored for damage tolerance by stitching layers of dry carbon fabric with closely spaced threads to provide reinforcement through thickness. Epoxy resin then infused into stitched preforms, and epoxy was cured. Various stitching patterns and thread materials evaluated by use of flat plate specimens. Also, blade-stiffened structural elements fabricated and tested. Stitched flat laminates showed outstanding damage tolerance, excellent compression strength in notched specimens, and acceptable fatigue behavior. Development of particular interest to aircraft and automotive industries.

Dow, Marvin B.↗

NASA NTRS1992

Properties of five toughened matrix composite materials

The use of toughened matrix composite materials offers an attractive solution to the problem of poor damage tolerance associated with advanced composite materials. In this study, the unidirectional laminate strengths and moduli, notched (open-hole) and unnotched tension and compression properties of quasi-isotropic laminates, and compression-after-impact strengths of five carbon fiber/toughened matrix composites, IM7/E7T1-2, IM7/X1845, G40-800X/5255-3, IM7/5255-3, and IM7/5260 have been evaluated. The compression-after-impact (CAI) strengths were determined primarily by impacting quasi-isotropic laminates with the NASA Langley air gun. A few CAI tests were also made with a drop-weight impactor. For a given impact energy, compression after impact strengths were determined to be dependent on impactor velocity. Properties and strengths for the five materials tested are compared with NASA data on other toughened matrix materials (IM7/8551-7, IM6/1808I, IM7/F655, and T800/F3900). This investigation found that all five materials were stronger and more impact damage tolerant than more brittle carbon/epoxy composite materials currently used in aircraft structures.

Cano, Roberto J.↗

NASA NTRS1992

Development of stitched/RTM composite primary structures

The goal of the NASA Advanced Composites Technology (ACT) Program is to provide the technology required to gain the full benefit of weight savings and performance offered by composite primary structures. Achieving the goal is dependent on developing composite materials and structures which are damage tolerant and economical to manufacture. Researchers at NASA LaRC and Douglas Aircraft Company are investigating stitching reinforcement combined with resin transfer molding (RTM) to create structures meeting the ACT program goals. The Douglas work is being performed under a NASA contract entitled Innovative Composites Aircraft Primary Structures (ICAPS). The research is aimed at materials, processes and structural concepts for application in both transport wings and fuselages. Empirical guidelines are being established for stitching reinforcement in primary structures. New data are presented in this paper for evaluation tests of thick (90-ply) and thin (16-ply) stitched laminates, and from selection tests of RTM composite resins. Tension strength, compression strength and post-impact compression strength data are reported. Elements of a NASA LaRC program to expand the science base for stitched/RTM composites are discussed.

Kullerd, Susan M.↗

NASA NTRS1992

Development of stitched/RTM composite primary structures

The goal of the NASA Advanced Composites Technology (ACT) Program is to provide the technology required to gain the full benefit of weight savings and performance offered by composite primary structures. Achieving the goal is dependent on developing composite materials and structures which are damage tolerant and economical to manufacture. Researchers at NASA Langley and Douglas Aircraft Co. are studying stitching reinforcement combined with resin transfer molding (RTM) to create structures meeting the ACT program goals. The research is aimed at materials, processes, and structural concepts for application in both transport wings and fuselages. Empirical guidelines are being established for stitching reinforcement in primary structures and test data are reported in another paper. New data are presented herein from evaluation tests of thick (96 ply) and thin (16 ply) stitched laminates and from selection tests of RTM composite resins. Tension strength, compression strength, and post impact compression strength data are reported. Elements of a NASA Langley program to expand the science base for stitched/RTM composites are discussed.

Kullerd, Susan M.↗

NASA NTRS1992

Evaluation of the mechanical properties and damage tolerance of five new toughened matrix composite materials

Notched and unnotched tension and compression properties of quasi-isotropic laminates are presently evaluated, in conjunction with compression-after-impact (CAI) strengths, for the cases of five different carbon fiber-reinforced/toughened matrix composites. For a given impact energy, CAIs were dependent on impact velocities. When compared with other matrix-toughened materials, the five presently considered were more damage-tolerant than such aircraft primary structure composite systems as T300/5208.

Cano, Roberto J.↗

NASA NTRS1991

Properties of three graphite/toughened resin composites

Results are presented from an experimental evaluation of IM7/977-2, IM7/F655, and T800/F3900. Data presented include ply-level (unidirectional laminate) strength and moduli, unnotched and notched (open hole) tension and compression properties of quasi-isotropic laminates, and compression-after-impact strengths. These data are compared with properties of other toughened (IM7/8551-7 and IM6/18081) and brittle (T300/5208) graphite-epoxy materials. The IM7/977-2, IM7/F655, and T800/F3900 materials are substantially stronger and more damage tolerant than widely used first generation composite materials such as T300/5208. The T800/F3900 outperforms IM7/977-2 and IM7/F655 materials in tolerance to projectile impacts. Compression-after-impact strengths were found to be dependent on impactor velocity for a given impact energy. The open hole compression properties of all three materials are degraded by the combination of heat and moisture.

Smith, Donald L.↗

NASA NTRS1991

Development of stitching reinforcement for transport wing panels

The NASA Advanced Composites Technology (ACT) program has the objective of providing the technology required to obtain the full benefit of weight savings and performance improvements offered by composite primary aircraft structures. Achieving the objective is dependent upon developing composite materials and structures which are damage tolerant and economical to manufacture. Researchers are investigating stitching reinforcement combined with resin transfer molding to produce materials meeting the ACT program objective. Research is aimed at materials, processes, and structural concepts for application in both transport wings and fuselages, but the emphasis to date has been on wing panels. Empirical guidelines are being established for stitching reinforcement in structures designed for heavy loads. Results are presented from evaluation tests investigating stitching types, threads, and density (penetrations per square inch). Tension strength, compression strength, and compression after impact data are reported.

Palmer, Raymond J.↗

NASA NTRS1989

The ACEE Program And Basic Research On Composites

NASA reference publication describes research in composites conducted at Langley Research Center between 1975 and 1986. Includes Langley basic technology and composite-primary-structures element of NASA Aircraft Energy Efficiency (ACEE) Program. Basic technology documents cited in bibliography grouped according to research activity; for example, design and analysis, fatigue and fracture, and tolerance to damage. ACEE documents cover development of composite structures for transport aircraft. Report deals only with resin/matrix composite materials.

Dow, Marvin B.↗

NASA NTRS1989

Damage-tolerant composite materials produced by stitching carbon fibers

NASA-Langley has undertaken the investigation of composite damage-tolerance enhancement and fabrication economies-maximization via reinforcement-stitching, in combination with resin transfer molding. Attention is given to results obtained by an experimental evaluation of composites tailored for damage tolerance by stitching layers of dry carbon-fiber fabric with closely-spaced threads, in order to furnish through-the-thickness reinforcement. Various stitching patterns and thread materials have been evaluated, using flat-plate specimens; blade-stiffened structural elements have been fabricated and tested. The results presented indicate that stitched laminates furnish damage tolerance performance comparable to that of more expensive, toughened-matrix composites.

Dow, Marvin B.↗

NASA NTRS1988

Properties of two composite materials made of toughened epoxy resin and high-strain graphite fiber

Results are presented from an experimental evaluation of IM7/8551-7 and IM6/18081, two new toughened epoxy resin, high strain graphite fiber composite materials. Data include ply-level strengths and moduli, notched tension and compression strengths and compression-after-impact assessments. The measured properties are compared with those of other graphite-epoxy materials.

Dow, Marvin B.↗

NASA NTRS1987

The ACEE program and basic composites research at Langley Research Center (1975 to 1986): Summary and bibliography

Composites research conducted at the Langley Research Center during the period from 1975 to 1986 is described, and an annotated bibliography of over 600 documents (with their abstracts) is presented. The research includes Langley basic technology and the composite primary structures element of the NASA Aircraft Energy Efficiency (ACEE) Program. The basic technology documents cited in the bibliography are grouped according to the research activity such as design and analysis, fatigue and fracture, and damage tolerance. The ACEE documents cover development of composite structures for transport aircraft.

Dow, Marvin B.↗

NASA NTRS1959

Compression Tests on Circular Cylinders Stiffened Longitudinally by Closely Spaced Z-Section Stringers

Six circular cylinders stiffened longitudinally by closely spaced Z-section stringers were loaded to failure in compression. The results obtained are presented and compared with available theoretical results for the buckling of orthotropic cylinders. The results indicate that the large disparity that exists between theory and experiment for unstiffened compression cylinders may be significantly smaller for stiffened cylinders.

Peterson, James P.↗