Search NASA⌕ Search

Engineering topics

Downs, Robert T.

Publications and source records attributed to Downs, Robert T..

Dehydration kinetics of nanoconfined water in beryl probed by high temperature single crystal synchrotron X-ray diffraction

Understanding changes in material properties through external stimuli plays a key role in validating the expected performance of materials and engineering material properties in a controlled manner. Here, we introduce a fundamental protocol to deduce dehydration reactions kinetics of water confined in nanopore channels, with the cyclosilicate beryl as the scaffold of interest, using time-resolved synchrotron X-ray diffraction (SXRD), in the temperature interval of 298–1038 K. The temperature-dependent intensity (I) of the strongest reflection (112) was used as the crystallite variable. An estimation of an isobaric thermal crystallite coefficient, k, analogous with the isobaric thermal expansion coefficient, established the rate of relative crystallization as a function of temperature, $\frac{∂I}{∂T}$. A plot of lnk and $\frac{1}{T}$ gives rise to two kinetic steps, indicating a slow dehydration stage up to ~ 700 K and a fast dehydration stage up to the investigated temperature 1038 K. The crystal structure of beryl determined up to 1038 K, in temperature increment as small as 10 K, indicates the presence of channel ions Na and Fe and a gradual decrease of water upon heating.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reworking and Diagenesis of Martian Soil: Pathway to Murray Formation Sediments?

In Gale crater, the Curiosity Mars rover has climbed over 300 meters of the Murray formation from the base of the Pahrump Hills to the crest of Vera Rubin Ridge. We discuss the possibility that fine-grained mudstone of the Murray formation is a diagenetic product of sediments with a chemical and mineralogical composition similar to present-day martian soil. Typical (low Ca-sulfate) Murray samples have Na2O, Al2O3, SiO2, SO3, TiO2 and FeOT concentrations within 10% (relative) of average martian soil. These oxides constitute ~85% of each sample. The Al/Si and Ti/Si ratios of Murray samples are comparable to average martian soil but distinct from other martian geologic units. Percentage difference in P2O5, Cl, K2O, Cr2O3, MnO, Ni, Zn, Br, and Ge between soil and Murray samples generally exceed 10%, but these elements and oxides amount to less than 4% of the samples. These constituents are highly variable in Murray mudstone and may reflect mobility in fluid interactions. Large discrepancies in MgO and CaO with ~50% lower concentrations in the Murray samples (~2% absolute differences) are indicative of open-system alteration if the Murray mudstone originated from soil-like material. Mineralogically, martian soil is dominated by plagioclase feldspar, pyroxenes, and olivine with minor hematite, magnetite, and Ca-sulfate. In comparison, Murray samples generally have less feldspar and pyroxene, little to no olivine, more iron oxides and Ca-sulfates, and Fe-containing phyllosilicates. If Murray mudstone originated from a Mars soil composition, aqueous alteration could have converted olivine and pyroxenes to iron oxides and phyllosilicates. Intermixed or zoned plagioclase feldspars could have lost a larger portion of calcic constituents, consistent with susceptibility to weathering, resulting in a change from ~An55 (soil) to ~An40 (Murray). This alteration could be consistent with the major element chemistry, including the small decrease in MgO and CaO. A subsequent influx of minor/trace elements and Ca-sulfate, e.g. from groundwater, would be required. In this diagenetic scenario, the bulk of the alteration would have been nearly isochemical, suggesting limited mineral segregation and aqueous alteration during transport from the drainage basin or a significant direct aeolian contribution to the Murray sediments.

Yen, Albert S.↗

Is Tridymite at Gale Crater Evidence for Silicic Volcanism on Mars?

The X-ray diffraction (XRD) instrument (CheMin) onboard the MSL rover Curiosity detected 17 wt% of the SiO2 polymorph tridymite (relative to bulk sample) for the Buckskin drill sample (73 wt% SiO2) obtained from sedimentary rock in the Murray formation at Gale Crater, Mars. Other detected crystalline materials are plagioclase, sanidine, cristobalite, cation-deficient magnetite, and anhydrite. XRD amorphous material constitutes approx. 60 wt% of bulk sample, and the position of its broad diffraction peak near approx. 26 deg. 2-theta is consistent with opal-A. Tridymite is a lowpressure, high-temperature mineral (approx. 870 to 1670 deg. C) whose XRD-identified occurrence on the Earth is usually associated with silicic (e.g., rhyolitic) volcanism. High SiO2 deposits have been detected at Gale crater by remote sensing from martian orbit and interpreted as opal-A on the basis H2O and Si-OH spectral features. Proposed opal-A formation pathways include precipitation of silica from lake waters and high-SiO2 residues of acid-sulfate leaching. Tridymite is nominally anhydrous and would not exhibit these spectral features. We have chemically and spectrally analyzed rhyolitic samples from New Mexico and Iwodake volcano (Japan). The glassy (by XRD) NM samples have H2O spectral features similar to opal-A. The Iwodake sample, which has been subjected to high-temperature acid sulfate leaching, also has H2O spectral features similar to opal-A. The Iwodake sample has approx. 98 wt% SiO2 and 1% wt% TiO2 (by XRF), tridymite (>80 wt.% of crystalline material without detectable quartz by XRD), and H2O and Si-OH spectral features. These results open the working hypothesis that the opal-A-like high-SiO2 deposits at Gale crater detected from martian orbit are products of alteration associated with silicic volcanism. The presence or absence of tridymite will depend on lava crystallization temperatures (NM) and post crystallization alteration temperatures (Iwodake).

Morris, Richard V.↗

Mineralogy, Provenance, and Diagenesis of a Potassic Basaltic Sandstone on Mars: CheMin X-Ray Diffraction of the Windjana Sample (Kimberley Area, Gale Crater)

The Windjana drill sample, a sandstone of the Dillinger member (Kimberley formation, Gale Crater, Mars), was analyzed by CheMin X-ray diffraction (XRD) in the MSL Curiosity rover. From Rietveld refinements of its XRD pattern, Windjana contains the following: sanidine (21% weight, approximately Or(sub 95)); augite (20%); magnetite (12%); pigeonite; olivine; plagioclase; amorphous and smectitic material (approximately 25%); and percent levels of others including ilmenite, fluorapatite, and bassanite. From mass balance on the Alpha Proton X-ray Spectrometer (APXS) chemical analysis, the amorphous material is Fe rich with nearly no other cations-like ferrihydrite. The Windjana sample shows little alteration and was likely cemented by its magnetite and ferrihydrite. From ChemCam Laser-Induced Breakdown Spectrometer (LIBS) chemical analyses, Windjana is representative of the Dillinger and Mount Remarkable members of the Kimberley formation. LIBS data suggest that the Kimberley sediments include at least three chemical components. The most K-rich targets have 5.6% K2O, approximately 1.8 times that of Windjana, implying a sediment component with greater than 40% sanidine, e.g., a trachyte. A second component is rich in mafic minerals, with little feldspar (like a shergottite). A third component is richer in plagioclase and in Na2O, and is likely to be basaltic. The K-rich sediment component is consistent with APXS and ChemCam observations of K-rich rocks elsewhere in Gale Crater. The source of this sediment component was likely volcanic. The presence of sediment from many igneous sources, in concert with Curiosity's identifications of other igneous materials (e.g.,mugearite), implies that the northern rim of Gale Crater exposes a diverse igneous complex, at least as diverse as that found in similar-age terranes on Earth.

Treiman, Allan H.↗

Investigation of Synthetic Mg(1.3)V(1.7)O4 Spinel with MgO Inclusions: Case Study of a Spinel with an Apparently occupied Interstitial Site

A magnesium vanadate spinel crystal, ideally MgV2O4, synthesized at 1 bar, 1200 C and equilibrated under FMQ + 1.3 log f(sub o2) condition, was investigated using single-crystal X-ray diffraction, electron microprobe, and electron backscatter (EBSD). The initial X-ray structure refinements gave tetrahedral and octahedral site occupancies, along with the presence of 0.053 apfu Mg at an interstitial octahedral site . Back-scattered electron (BSE) images and electron microprobe analyses revealed the existence of an Mg-rich phase in the spinel matrix, which was too small (less than or equal to 3microns) for an accurate chemical determination. The EBSD analysis combined with X-ray energy dispersive spectroscop[y (XEDS) suggested that the Mg-rich inclusions are periclase oriented coherently with the spinel matrix. The final structure refinements were optimized by subtracting the X-ray intensity contributions (approx. 9%) of periclase reflections, which eliminated the interstitial Mg. This study provides insight into possible origins of refined interstitial cations reported in the the literature for spinel, and points to the difficulty of using only X-ray diffraction data to distinguish a spinel with interstitial cations from one with coherently oriented MgO inclusions.

Uchida, Hinako↗