Engineering topics

Druhan, Jennifer L.

Publications and source records attributed to Druhan, Jennifer L..

18 records

DOE OSTI2024

Antecedent Hydrologic Conditions Reflected in Stream Lithium Isotope Ratios During Storms

Antecedent hydrological conditions are recorded through the evolution of dissolved lithium isotope signatures (δ 7 Li) by juxtaposing two storm events in an upland watershed subject to a Mediterranean climate. Discharge and δ 7 Li are negatively correlated in both events,but mean δ 7 Li ratios and associated ranges of variation are distinct between them. We apply a previously developed reactive transport model (RTM) for the site to these event-scale flow perturbations, but observed shifts in stream δ 7 Li are not reproduced. To reconcile the stability of the subsurface solute weathering profile with our observations of dynamic stream δ 7 Li signatures, we couple the RTM to a distribution of fluid transit times that evolve based on storm hydrographs. The approach guides appropriate flux-weighting of fluid from the RTM over a range of flow path lengths, or equivalently fluid residence times. This flux-weighted RTM approach accurately reproduces dynamic storm δ 7 Li-discharge patterns distinguished by the antecedent conditions of the watershed.

58 GEOSCIENCES↗

DOE OSTI2024

Weathering Incongruence in Mountainous Mediterranean Climates Recorded by Stream Lithium Isotope Ratios

Lithium isotope ratios (δ 7 Li) of rivers are increasingly serving as a diagnostic of the balance between chemical and physical weathering contributions to overall landscape denudation rates. Here, we show that intermediate weathering intensities and highly enriched stream δ 7 Li values typically associated with lowland floodplains can also describe small upland watersheds subject to cool, wet climates. This behavior is revealed by stream δ 7 Li between +22.4 and +23.5‰ within a Critical Zone observatory located in the Cévennes region of southern France, where dilute stream solute concentrations and significant atmospheric deposition otherwise mask evidence of incongruence. The water-rock reaction pathways underlying this behavior are quantified through a multicomponent, isotope-enabled reactive transport model. Using geochemical characterization of soil profiles, bedrock, and long-term stream samples as constraints, we evolve the simulation from an initially unweathered granite to a steady state weathering profile which reflects the balance between (a) fluid infiltration and drainage and (b) bedrock uplift and soil erosion. Enriched stream δ 7 Li occurs because Li is strongly incorporated into actively precipitating secondary clay phases beyond what prior laboratory experiments have suggested. Chemical weathering incongruence is maintained despite relatively slow reaction rates and moderate clay accumulation due to a combination of two factors. First, reactive primary mineral phases persist across the weathering profile and effectively “shield” the secondary clays from resolubilization due to their greater solubility. Second, the clays accumulating in the near-surface profile are relatively mature weathering byproducts. These factors promote characteristically low total dissolved solute export from the catchment despite significant input of exogenous dust.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Controls on Barite (BaSO 4 ) Precipitation in Unconventional Reservoirs

Barite (BaSO 4 ) precipitation is one of the most ubiquitous examples of secondary sulfate mineral scaling in shale oil and gas reservoirs. Often, a suite of chemical additives is used during fracturing operations to inhibit the accumulation of mineral scales, though their efficacy is widely varied and poorly understood. This study combines experimental data and multi-component numerical reactive transport modeling to offer a more comprehensive understanding of the geochemical behavior of barite accumulation in shale matrices under conditions typical of fracturing operations. A variety of additives and conditions are individually tested in batch reactor experiments to identify the factors controlling barite precipitation. Our experimental results demonstrate a pH dependence in the rate of barite precipitation, which we use to develop a predictive model including a pH-dependent term that satisfactorily reproduces our observations. Further, this model is then extended to consider the behavior of three major shale samples of highly variable mineralogy (Eagle Ford, Marcellus, and Barnett). This data-validated model offers a reliable tool to predict and ultimately mitigate against secondary mineral accumulation in unconventional shale reservoirs.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Quantification of the Impact of Acidified Brine on Fracture-Matrix Transport in a Naturally Fractured Shale Using in Situ Imaging and Modeling

Understanding flow, transport, chemical reactions, and hydromechanical processes in fractured geologic materials is key for optimizing a range of subsurface processes including carbon dioxide and hydrogen storage, unconventional energy resource extraction, and geothermal energy recovery. Flow and transport processes in naturally fractured shale rocks have been challenging to characterize due to experimental complexity and the multiscale nature of quantifying continuum scale descriptions of mass exchange between micrometer-scale fractures and nanometer-scale pores. In this study, we use positron emission tomography (PET) to image the transport of a conservative tracer in a naturally fractured Wolfcamp shale core before and after the core was exposed to low pH brine conditions. Image-based experimental observations are interpreted by fitting an analytical transport model to fracture-containing voxels in the core. Results of this analysis indicate subtle increases in matrix diffusivity and a slightly more uniform fracture velocity distribution following exposure to low pH conditions. These observations are compared with a multicomponent one-dimensional reactive transport model that indicates the capacity for a 10% increase in porosity at the fracture-matrix interface as a result of the low pH brine exposure. This porosity change is the result of the dissolution of carbonate minerals in the shale matrix to low pH conditions. Further, this image-based workflow represents a new approach for quantifying spatially resolved fracture-matrix transport processes and provides a foundation for future work to better understand the role of coupled transport, reaction, and mechanical processes in naturally fractured rocks.

58 GEOSCIENCES↗

DOE OSTI2023

Mixed imbibition controls the advance of wetting fluid in multiscale geological media

Imbibition plays a central role during multiphase flows in geological media; yet, our understanding of imbibition dynamics across the multiscale features of rocks, including fractures, microcracks, and heterogeneous matrices is limited. Here, we deployed a unique combination of micro- and clinical X-ray CT imaging to probe directly the spatiotemporal evolution of imbibition in a natural, multiscale shale sample. The method enabled unraveling of mixed imbibition behavior, with spontaneous imbibition rates in the matrix pores and microcracks driven by capillarity proceeding as $\propto t^{-1/2}$, whereas pressure-driven flows in the macroscopic fractures yield apparent imbibition rates with $\propto t^{-1}$ scaling. Regardless of the aperture, we showed that spontaneous imbibition proceeds uniformly away from the fractures. The effects of microcracks are further investigated by comparing the dynamics of the imbibition fronts with and without microcracks. Finally, these results highlight the paramount role of microcracks on anomalous front roughening and the need to account for microcracks appropriately in the development of predictive theoretical models.

58 GEOSCIENCES↗

DOE OSTI2023

Deep root activity overprints weathering of petrogenic organic carbon in shale

The oxidation of organic carbon in sedimentary bedrock (petrogenic OC, OC petro ) is increasingly recognized as a potential source of CO 2 to the atmosphere. Recent studies provide evidence for the mobilization and oxidation of OC petro in sedimentary bedrock during rock weathering. However, the mechanisms and rates remain uncertain, particularly where overlying soils and vegetation drive contemporaneous oxidation of recently fixed organic carbon. Here, in this study, we quantify OC petro weathering across a 16 m shale depth profile in a steep, rapidly eroding forested hillslope in the Northern California Coast Ranges. We report solid and gas phase radiocarbon and stable isotope analyses of samples extracted from specialized in-situ samplers, and a supporting laboratory incubation experiment of the shale regolith. OC petro is removed from the weathered bedrock at a rate of approximately 0.12 gC/m 3 yr, which is orders of magnitude lower than the rate of OC petro oxidation we achieved in the laboratory with crushed samples (557.1 gC/m 3 yr). This disparity occurs despite high O 2(g) content across the depth profile, indicating that physical accessibility of OC petro can regulate oxidative weathering. There is no direct radiocarbon evidence of OC petro oxidation in CO 2(g) across the upper 13 m of the weathering profile during both wet and dry seasons. Instead, vadose zone CO 2(g) production at the site is dominated by respiration of recently fixed carbon associated with deep rooting. OC petro is clearly mobilized across the vadose zone during weathering in this rapidly eroding, oxygen-rich, biologically dynamic hillslope, but at rates far below what can be measured given the contribution of root-derived CO 2(g) .

58 GEOSCIENCES↗

DOE OSTI2022

Dynamic development of geochemical reaction fronts during hydraulic stimulation of shale

Injection of acidic hydraulic fracture fluid (HFF) into shale formations for unconventional oil/gas production results in chemical reactions in the shale matrix that can alter fluid transport. Here, we report the results of set of experiments designed to evaluate the impact of calcite dissolution as a function of carbonate mineral content on matrix chemical reactivity and pore-space modification concomitant with imbibition. In this study, we tracked acidic HFF transport in four samples of Wolfcamp shale with calcite contents varying from 4% to 59% by monitoring the rate and spatial extent of bromide tracer transport using synchrotron-based X-ray fluorescence microprobe (XFM) imaging. Concurrently, we also carried out XFM imaging of the spatial distribution of Ca in the Wolfcamp shale cores (as a proxy of calcite distribution). Our approach thus yields a direct record of time-resolved selective ion transport resulting from the penetration of acidic HFF and the associated mineral transformations in the shale cores. We show that the variability in calcite content of Wolfcamp shale samples can directly affect the rate and spatial extent of imbibition. Although reaction of the acidic HFF with carbonates in shales enhances calcite dissolution and increases porosity, the spatial extent of calcite dissolution in the shale matrix is limited due to a rapid neutralization of pH. The relative abundance and spatial distribution of calcite control the chemical saturation state of the HFF progressing into the matrix. As a result, calcite has a major impact on the spatial extent and rate of matrix alteration and thus on HFF transport during subsurface reservoir stimulation. Consequently, increased calcite content in the shale matrix inhibits the spatial extent of the pore-volume increase and, by extension, the spatial extent and rate of imbibition. Our results thus show that the overall rates of calcite dissolution approach the rates of acidic HFF transport (i.e., Damköhler number ~1), which could contribute to the efficiency of subsurface reservoir stimulation. A better understanding of HFF-calcite reaction rates is crucial for improving the prediction and optimization of fluid transport across HFF-shale interfaces during hydraulic fracturing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Influence of sequential stimulation practices on geochemical alteration of shale

Water-based hydraulic fracturing fluids (HFFs) can chemically interact with formation shale, resulting in altered porosity and permeability of the host rock. Experimental investigations of spatial and temporal shale-HFF interactions are helpful in interpreting chemical compositions of the injectate, as well as predicting alteration of hydraulic properties in the reservoir due to mineral dissolution and precipitation. Most bench-top experiments designed to study shale-HFF chemical interactions, either using batch reactors or flow-through setups, are carried out assuming that the acid spearhead has already become mixed with neutral HFFs. During operations, however, HFFs are typically injected according to a sequenced pumping schedule, starting with a concentrated acid spearhead, followed by multiple additions of near-neutral pH HFFs containing chemical amendments and proppant. In this study, we use geochemical modeling to consider whether this pre-mixed experimental protocol provides results directly comparable to a sequential discrete fluid-shale interaction protocol. Our results show that for the batch system, the transient evolution in major ion concentrations is faster with the sequential procedure. After 2 h of reaction time, the two protocols converge to the same aqueous concentrations. In a flow-through geometry, the pre-mixed model predicts extensive chemical alteration close to the injection point but negligible alteration downstream. In contrast, the sequential model predicts mineral reactions over hundreds of meters along the flow path. The extent of shale alteration in the sequential model at a given location depends on shale mineralogy and where the acid spearhead resides during the shut-in period. The predictive model developed in this study can help experimentalists to design bench-top tests and operators to better translate the results of laboratory experiments into practical applications.

Li, Qingyun↗

DOE OSTI2022

Impact of Concurrent Solubilization and Fines Migration on Fracture Aperture Growth in Shales during Acidized Brine Injection

Acidic hydraulic fracturing fluid chemically and physically alters shale rock fabric during injection and shut-in, creating a “reaction-altered zone” along the fracture faces. To better characterize the variable thickness and composition of this reaction-altered zone under advective flow, we take a coupled experimental and modeling approach. A fluidic cell, with six fiducial markers, is first fabricated to keep the rock sample in place during the core floods and to allow image alignment of acquired images. Then, we conduct a series of reactive core floods in a clay-rich siliceous Wolfcamp shale sample with 10 wt % carbonate, using a synthetic fracturing fluid under no confining stress and at room temperature. High-resolution computed tomography (CT) scans are periodically conducted to observe the spatial alteration of the fracture network. We then perform scanning electron microscopy (SEM-EDS) on the two orthogonal surfaces (fracture surface and freshly cut profile face) to generate high-resolution elemental maps that show the change in mineralogy, both with distance along a given flow path along a fracture surface and with depth from the fracture surface into the shale matrix. These results are contrasted against a two-dimensional (2D) advection-diffusion reaction model developed previously for batch reactions between shale and synthetic fracturing fluids. The model simulates the geochemical interaction occurring at the fracture/matrix interface and penetrating into the shale matrix during the reactive core flood. Both model and experimental results show that the acidic brine is neutralized during the core flood, corresponding to an increase in fracture aperture as a function of fluid volume injected with the greatest change near the inlet. SEM-EDS scans reveal significant dissolution of carbonates on the fracture surface without pyrite oxidation. The reactive transport model indicates that carbonate depletion into the shale interior should be observable, yet SEM-EDS shows no discernible loss of carbonate in the orthogonal profile face. The combination of these observations suggests an additional fracture evolution mechanism in the reactive system, i.e., fines migration. We show that fines migration enhances the access of fracturing fluid to the matrix resulting in a more pronounced fracture widening. Finally, we conclude that coupled mineral dissolution and fines migration govern fracture aperture growth during acidized brine injection. In this work, we effectively show the underlying risk of relying solely on models that do not include an important (transport) process that can alter the system significantly and propose a combined chemomechanical mechanism for fracture evolution appropriate for this shale mineralogy.

58 GEOSCIENCES↗

DOE OSTI2022

Chemical and Reactive Transport Processes Associated with Hydraulic Fracturing of Unconventional Oil/Gas Shales

Hydraulic fracturing of unconventional oil/gas shales has changed the energy landscape of the U.S.. Recovery of hydrocarbons from tight, hydraulically fractured shales is a highly inefficient process, with estimated recoveries of < 25% for natural gas and < 5% for oil. This review focuses on the complex chemical interactions of additives in hydraulic fracturing fluid (HFF) with minerals and organic matter in oil/gas shales. These interactions are intended to increase hydrocarbon recovery by increasing porosities and permeabilities of tight shales. However, fluid-shale interactions result in the dissolution of shale minerals and the release and transport of chemical components. They also result in mineral precipitation in the shale matrix, which can reduce permeability, porosity, and hydrocarbon recovery. Competition between mineral dissolution and mineral precipitation processes influences the amounts of oil and gas recovered. We review the temporal/spatial origins and distribution of unconventional oil/gas shales from mudstones and shales, followed by discussion of their global and U.S. distributions and compositional differences from different U.S. sedimentary basins. We discuss the major types of chemical additives in HFF with their intended purposes, including drilling muds. Fracture distribution, porosity, permeability, and the identity and molecular-level speciation of minerals and organic matter in oil/gas shales throughout the hydraulic fracturing process are discussed. Also discussed are analysis methods used in characterizing oil/gas shales before and after hydraulic fracturing, including permeametry and porosimetry measurements, X-ray diffraction/Rietveld refinement, X-ray computed tomography, scanning/transmission electron microscopy, and laboratory- and synchrotron-based imaging/spectroscopic methods. Reactive transport and spatial scaling are discussed in some detail in order to relate fundamental molecular-scale processes to fluid transport. Furthermore, our review concludes with a discussion of potential environmental impacts of hydraulic fracturing and important knowledge gaps that must be bridged to achieve improved mechanistic understanding of fluid transport in oil/gas shales.

04 OIL SHALES AND TAR SANDS↗

DOE OSTI2022

Geochemical Modeling of Celestite (SrSO 4 ) Precipitation and Reactive Transport in Shales

Celestite (SrSO 4 ) precipitation is a prevalent example of secondary sulfate mineral scaling issues in hydraulic fracturing systems, particularly in basins where large concentrations of naturally occurring strontium are present. Herein, we present a validated and flexible geochemical model capable of predicting celestite formation under such unconventional environments. Simulations were built using CrunchFlow and guided by experimental data derived from batch reactors. These data allowed the constraint of key kinetic and thermodynamic parameters for celestite precipitation under relevant synthetic hydraulic fracturing fluid conditions. Effects of ionic strength, saturation index, and the presence of additives were considered in the combined experimental and modeling construction. This geochemical model was then expanded into a more complex system where interactions between hydraulic fracturing fluids and shale rocks were allowed to occur subject to diffusive transport. We find that the carbonate content of a given shale and the presence of persulfate breaker in the system strongly impact the location and extent of celestite formation. The results of this study provide a novel multicomponent reactive transport model that may be used to guide future experimental design in the pursuit of celestite and other sulfate mineral scale mitigation under extreme conditions typical of hydraulic fracturing in shale formations.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Core-flood Effluent and Shale Surface Chemistries in Predicting Interaction between Shale, Brine, and Reactive Fluid

We report field and laboratory observations to date indicate that the efficiency of hydraulic fracturing, as it relates to hydrocarbon recovery, depends significantly on geochemical alterations to rock surfaces that diminish accessibility by partial or total plugging of the pore and fracture networks. This is caused by mineral scale deposition such as coating of fracture surfaces with precipitates, particle migration, and/or crack closure due to dissolution under stress. In reactive flow-through experiments, mineral reactions in response to acidic fluid injection significantly reduced system porosity and core permeability. The present study focuses on changes to fluid chemistry and shale surfaces (inlet and fracture walls) resulting from shale-fluid interactions and integrating these findings for an improved estimate of transport-related consequences. The reacted shale surfaces were examined by spatially-resolved scanning electron microscopy - energy dispersive spectroscopy (SEM-EDS) analysis. Importantly, inductively coupled plasma - mass spectrometry/optical emission spectroscopy (ICP-MS/OES) was utilized to probe the chemical evolution of the core-flood effluents. The three study cores selected from the Marcellus formation represent different mineralogies and structural features. In flow-through experiments, lab-generated brine and HCl-based fracture fluid (pH=2) were injected sequentially under effective stress (up to 500 psi) at reservoir temperature (80°C). SEM-EDS results confirmed by the ICP concentration trends showed significant Fe hydroxide precipitates in clay- and pyrite-rich outcrop samples due to partial oxidation of Fe-bearing phases in the case of intrusion of low salinity water-based fluids. Porosity reduction in the MSEEL (Marcellus Shale Energy and Environmental Laboratory) carbonate-rich sample is related to compaction of cores under stress due to matrix softening with substantial dissolution, and pore-filling by hydroxides, as well as barite and salts. Despite the same fluid compositions and experimental conditions used for both MSEEL samples, barite precipitation was much more intense in the MSEEL clay-rich sample due to its greater sorption capacity and additional sulfate source as well as fissile nature with multiple lengthwise cracks. ICP tests revealed time-resolved concentration trends in produced brine and reactive fluids that in turn complemented the pre-/post-reaction SEM-EDS observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

A Critical Review of the Physicochemical Impacts of Water Chemistry on Shale in Hydraulic Fracturing Systems

Hydraulic fracturing of unconventional hydrocarbon resources involves the sequential injection of a high-pressure, particle-laden fluid with varying pH’s to make commercial production viable in low permeability rocks. This process both requires and produces extraordinary volumes of water. The water used for hydraulic fracturing is typically fresh, whereas “flowback” water is typically saline with a variety of additives which complicate safe disposal. As production operations continue to expand, there is an increasing interest in treating and reusing this high-salinity produced water for further fracturing. Here in this paper we review the relevant transport and geochemical properties of shales, and critically analyze the impact of water chemistry (including produced water) on these properties. We discuss five major geochemical mechanisms that are prominently involved in the temporal and spatial evolution of fractures during the stimulation and production phase: shale softening, mineral dissolution, mineral precipitation, fines migration, and wettability alteration. A higher salinity fluid creates both benefits and complications in controlling these mechanisms. For example, higher salinity fluid inhibits clay dispersion, but simultaneously requires more additives to achieve appropriate viscosity for proppant emplacement. In total this review highlights the nuances of enhanced hydrogeochemical shale stimulation in relation to the choice of fracturing fluid chemistry.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Multi-Scale Microfluidics for Transport in Shale Fabric

We develop a microfluidic experimental platform to study solute transport in multi-scale fracture networks with a disparity of spatial scales ranging between two and five orders of magnitude. Using the experimental scaling relationship observed in Marcellus shales between fracture aperture and frequency, the microfluidic design of the fracture network spans all length scales from the micron (1 μ) to the dm (10 dm). This intentional `tyranny of scales’ in the design, a determining feature of shale fabric, introduces unique complexities during microchip fabrication, microfluidic flow-through experiments, imaging, data acquisition and interpretation. Here, we establish best practices to achieve a reliable experimental protocol, critical for reproducible studies involving multi-scale physical micromodels spanning from the Darcy- to the pore-scale (dm to μm). With this protocol, two fracture networks are created: a macrofracture network with fracture apertures between 5 and 500 μm and a microfracture network with fracture apertures between 1 and 500 μm. The latter includes the addition of 1 μm ‘microfractures’, at a bearing of 55°, to the backbone of the former. Comparative analysis of the breakthrough curves measured at corresponding locations along primary, secondary and tertiary fractures in both models allows one to assess the scale and the conditions at which microfractures may impact passive transport.

58 GEOSCIENCES↗

DOE OSTI2020

Carbon Dioxide Production in Bedrock Beneath Soils Substantially Contributes to Forest Carbon Cycling

Abstract Soils are widely considered the primary terrestrial organic matter pool mediating carbon transactions with the atmosphere and groundwater. Because soils are both a host and a product of rhizosphere activity, they are thought to mark the location where photosynthetic fixation of carbon dioxide (CO 2 ) is balanced by the oxidation of organic matter. However, in many terrestrial environments, the rhizosphere extends below soils and into fractured bedrock, and it is unknown if the resulting biological and hydrologic dynamics in bedrock have a significant impact on carbon cycling. Here we show substantial production of CO 2 in weathered bedrock at 4–8 m below the thin soils (<0.5 m thick) of a Northern California forest using innovative monitoring technology for sampling gases and water in fractured rock. The deep CO 2 production supports a persistent upward flux of CO 2(g) year‐round from bedrock to soil, constituting between 2% and 29% of the average daily CO 2 efflux from the land surface. When water is rapidly transported across the fractured bedrock vadose zone, nearly 50% of the CO 2 produced in the bedrock dissolves into water, promoting water‐rock interaction and export of dissolved inorganic carbon (DIC) from the unsaturated zone to groundwater, constituting as much as 80% of the DIC exiting the hillslope. Such CO 2 production in weathered bedrock is subject to unique moisture, temperature, biological, and mineralogical conditions which are currently missing from terrestrial carbon models.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Influence of physical and chemical hydrology on bioremediation of a U-contaminated aquifer informed by reactive transport modeling incorporating 238 U/ 235 U ratios

Microbially-catalyzed reductive immobilization of aqueous uranium (U) as a solid phase has been proposed as a U remediation technique. Both laboratory and field experiments have demonstrated that this reduction reaction alters the 238 U/ 235 U ratio, producing a 238 U-enriched U(IV) solid. In contrast, other major U reactive transport processes fractionate these isotopes much less. This suggests the potential to quantify the extent of bioreduction occurring in groundwater containing U using the 238 U/ 235 U ratio, which would substantially improve upon current practices largely relying on U concentration measurements alone. Current reactive transport models for uranium dynamics include only concentration measurements, which are strongly influenced by highly coupled reactive transformation and aqueous transport processes. The complex physical and chemical behavior of U potentially compromises such quantitative analysis of U storage and release. Here we report the first numerical reactive transport model which explicitly incorporates variations in the 238 U/ 235 U ratio of U and demonstrates improved interpretation of the principal chemical reactions and groundwater transport processes affecting the subsurface mobility and distribution of this widespread contaminant. Recent U bioreduction studies performed in a contaminated aquifer in Rifle, Colorado, USA applied Rayleigh distillation models to interpret U stable isotope fractionation observed as a result of acetate amendment. These simplified models were unable to resolve the spatiotemporal pattern of U isotope fractionation recorded in the aqueous solutes. Here, we employ the multi-component, isotope-enabled CrunchTope reactive transport software to interpret these measured U isotope ratios, and demonstrate accurate reproduction of observed trends in both geochemistry and 238 U/ 235 U ratios for two consecutive years of field experiments. Overall, our results indicate that accurately modeling both the U concentration and isotope ratio distributions greatly constrains the parameter space of the model. We find that the transport properties of U in the Rifle aquifer are governed by the presence of low-permeability regions, which the isotopes are uniquely sensitive to. When U reduction is spatially constrained by these low-permeability regions, the shift in the 238 U/ 235 U ratio becomes more muted. Accurate modeling of observed U isotope ratios thus provides a powerful means to better understand bioremediation, and the current study serves to advance the application of this novel method.

238U/235U↗

DOE OSTI2020

Soil Respiration Response to Rainfall Modulated by Plant Phenology in a Montane Meadow, East River, Colorado, USA

Soil respiration is a primary component of the terrestrial carbon cycle. However, predicting the response of soil respiration to climate change remains a challenge due to the complex interactions between environmental drivers, especially plant phenology, temperature, and soil moisture. In this study, we use a 1-D diffusion-reaction model to calculate depth-resolved CO 2 production rates from soil CO 2 concentrations and surface efflux observations in a subalpine meadow in the East River watershed, CO. Modeled rates are compared to in situ soil temperature and moisture conditions and MODIS satellite enhanced vegetation index (EVI) representing plant phenology across three hydrologically distinct growing seasons from 2016-2018. While soil respiration correlated with temperature on diel timescales (p<0.05), seasonal variability was dominated by soil moisture and plant phenology (p<0.05). We observed significant respiration increases in response to precipitation events; however, magnitude and duration were significantly higher in 2017 than 2016 despite similar wetting characteristics. Based on MODIS EVI, we suggest the respiration response to rainfall is controlled by plant phenology, which in turn reflects the capacity of plants to respond to precipitation via increased photosynthesis and autotrophic respiration, behavior that is not captured in typical soil respiration pulse models. Projected changes in montane climate such as earlier snowmelt and prolonged fore-summer drought may decrease soil respiration fluxes by decreasing the overlap between peak productivity and the summer monsoon. Lastly, we observed significant late-season CO 2 fluxes from the deep sub-soil (>165 cm) that support growing evidence for the importance of sub-soil processes in driving integrated respiration fluxes.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Stable and radioactive carbon isotope partitioning in soils and saturated systems: a reactive transport modeling benchmark study

This benchmark provides the first rigorous test of a three-isotope system [ 12 C, 13 C, and 14 C] subject to the combined effects of radioactive decay and both stable equilibrium and kinetic fractionation. We present a series of problems building in complexity based on the cycling of carbon in both organic and inorganic forms. The key components implement (1) equilibrium fractionation between multiple coexisting carbon species as a function of pH, (2) radioactive decay of radiocarbon with associated mass-dependent speciation demonstrating appropriate correction of the Δ 14 C value in agreement with reporting convention, and (3) kinetic stable isotope fractionation due to the oxidation of organic carbon to inorganic forms as a function of time and space in an open, through-flowing system. Participating RTM codes are CrunchTope, ToughReact, Hytec, and The Geochemist’s Workbench. Across all problem levels, simulation results from all RTMs demonstrate good agreement.

58 GEOSCIENCES↗