Search NASA⌕ Search

Engineering topics

Du, Mao-Hua

Publications and source records attributed to Du, Mao-Hua.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Procedures for Assessing the Stability of Proposed Topological Materials

Here, we investigate the stability of MnPb 2 Bi 2 Te 6 (MPBT), which is predicted to be a magnetic topological insulator (TI), using density functional theory calculations. Our analysis includes various measures such as enthalpies of formation, Helmholtz free energies, defect formation energies, and dynamical stability. Our thermodynamic analysis shows that the phonon contribution to the energy gain from finite temperature is estimated to be less than 10 meV/atom, which may not be sufficient to stabilize MPBT at high temperatures, even with the most favorable reactions starting from binaries. While MPBT is generally robust against the formation of various defects, we find that the anti-site defect formation of MnPb is the most likely to occur, with a corresponding energy less than 60 meV. This can be attributed to the significant energy cost from compressive strain at the PbTe layer. Our findings suggest that MPBT is on the brink of stability in terms of thermodynamics and defect formation, underscoring the importance of conducting systematic analyses of the stability of proposed TIs, including MPBT, for their practical utilization. This study offers valuable insights into the design and synthesis of desirable magnetic TI materials with robust stabilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Non-volatile electric control of magnetic and topological properties of MnBi 2 Te 4 thin films

In this letter, we propose a mechanism to control the magnetic properties of topological quantum material (TQM) by using magnetoelectric coupling: this mechanism uses a heterostructure of TQM with two-dimensional (2D) ferroelectric material, which can dynamically control the magnetic order by changing the polarization of the ferroelectric material and induce possible topological phase transitions. This concept is demonstrated using the example of the bilayer MnBi 2 Te 4 on ferroelectric In 2 Se 3 or In 2 Te 3 , where the polarization direction of the 2D ferroelectrics determines the interfacial band alignment and consequently the direction of the charge transfer. This charge transfer, in turn, enhances the stability of the ferromagnetic state of MnBi 2 Te 4 and leads to a possible topological phase transition between the quantum anomalous Hall (QAH) effect and the zero plateau QAH. Our work provides a route to dynamically alter the magnetic ordering of TQMs and could lead to the discovery of new multifunctional topological heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Origin of ultralow phonon transport and strong anharmonicity in lead-free halide perovskites

All-inorganic lead-free halide double perovskites offer a promising avenue toward non-toxic, stable optoelectronic materials, properties that are missing in their prominent lead-containing counterparts. Their large thermopowers and high carrier mobilities also make them promising for thermoelectric applications. Here, in this work, we present a first-principles study of the lattice vibrations and thermal transport behaviors of Cs 2 SnI 6 and γ-CsSnI 3 , two prototypical compounds in this materials class. We show that conventional static zero temperature density functional theory (DFT) calculations severely underestimate the lattice thermal conductivities (κ l ) of these compounds, indicating the importance of dynamical effects. By calculating anharmonic renormalized phonon dispersions, we show that some optic phonons significantly harden with increasing temperature (T), which reduces the scattering of heat carrying phonons and enhances calculated κ l values when compared with standard zero temperature DFT. Furthermore, we demonstrate that coherence contributions to κ l , arising from wave like phonon tunneling, are important in both compounds. Overall, calculated κ l with temperature-dependent interatomic force constants, built from particle and coherence contributions, are in good agreement with available measured data, for both magnitude and temperature dependence. Large anharmonicity combined with low phonon group velocities yield ultralow values, with room temperature values of 0.26 W/m-K and 0.72 W/m-K predicted for Cs 2 SnI 6 and γ-CsSnI 3 , respectively. We further show that the lattice dynamics of these compounds are highly anharmonic, largely mediated by rotation of the SnI6 octahedra and localized modes originating from Cs rattling motion. These thermal characteristics combined with their previously computed excellent electronic properties make these perovskites promising candidates for optoelectronic and room temperature thermoelectric applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Native and radiation induced point defects in AlN and Sc-doped AlN

Herein, we have performed first-principles calculations to investigate the electronic structure, configurations, formation, and binding energies of native and radiation induced point defects in pristine and Sc-doped wurtzite AlN. For the native defects, the nitrogen vacancy has the lowest formation energy in p-type material while the aluminum vacancy has the lowest formation energy in n-type material which is consistent with the previous studies. Several interstitial defect structures were modeled for Al, N, and Sc atoms. The effects of charge state on their relative stability were investigated. The binding energy of Sc with point defects was calculated and found to be dependent strongly on the defect type and charge state. The results obtained are discussed in light of the possible Sc effects on the radiation damage evolution in AlN. Thus the attraction of Sc atom to N vacancy and both Al and N interstitials reduces their mobility and increases Frenkel pair recombination distance.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Correlative Nanoscale Imaging of Strained hBN Spin Defects

Spin defects like the negatively charged boron vacancy color center (V B - ) in hexagonal boron nitride (hBN) may enable new forms of quantum sensing with near-surface defects in layered van der Waals heterostructures. Here, the effect of strain on V B - color centers in hBN is revealed with correlative cathodoluminescence and photoluminescence microscopies. Strong localized enhancement and redshifting of the V B - luminescence is observed at creases, consistent with density functional theory calculations showing V B - migration toward regions with moderate uniaxial compressive strain. The ability to manipulate spin defects with highly localized strain is critical to the development of practical 2D quantum devices and quantum sensors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Photophysical properties of zero-dimensional perovskites studied by PBE0 and GW+BSE methods

Due to the exceptional photophysical properties and great potential applications in solid state lighting, zero-dimensional halide perovskites with broadband emitting have recently attracted much attention. In this work, to reveal the origin of the broadband absorption and emission spectra of 0D (C 4 N 2 H 14 Br) 4 SnBr x I 6-x (x = 3), the ground state and exciton dynamics properties have been studied by hybrid PBE0 functional and the GW+BSE method. Different self-trapped excitons (STEs) are obtained, and their emission energies by PBE0 are consistent well with experimental data. By considering the vibrational broadening of emission, our calculated full width at half maximum of emission accords well with the experiment. The absorption of free exciton and STEs is also calculated by considering the quasiparticle and excitonic effect. Our results show that these light-induced trapped states can be observed by experiments, as confirmed in other similar systems by the femtosecond transient absorption spectra.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Tuning the room temperature ferromagnetism in Fe 5 GeTe 2 by arsenic substitution

In order to tune the magnetic properties of the cleavable high-Curie temperature ferromagnet Fe$_{5-x}$GeTe 2 , the effect of increasing the electron count through arsenic substitution has been investigated. Small additions of arsenic (2.5% and 5%) seemingly enhance ferromagnetic order in polycrystalline samples by quenching fluctuations on one of the three magnetic sublattices, whereas larger As concentrations decrease the ferromagnetic Curie temperature (T C ) and saturation magnetization. Furthermore, this work also describes the growth and characterization of Fe 4.8 AsTe 2 single crystals that are structurally analogous to Fe$_{5-x}$GeTe 2 but with some phase stability complications. Magnetization measurements reveal dominant antiferromagnetic behavior in Fe 4.8 AsTe 2 with a Néel temperature of $T_{\textrm{N}} \approx$ 42 K. A field-induced spin-flop below T N results in a switch from negative to positive magnetoresistance, with significant hysteresis causing butterfly-shaped resistance loops. In addition to reporting the properties of Fe 4.8 AsTe 2 , this work shows the importance of manipulating the individual magnetic sublattices in Fe$_{5-x}$GeTe 2 and motivates further efforts to control the magnetic properties in related materials by fine tuning of the Fermi energy or crystal chemistry.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Role of Polycyclic Aromatic Alkylammonium Cations in Tuning the Electronic Properties and Band Alignment of Two-Dimensional Hybrid Perovskite Semiconductors

Two-dimensional hybrid organic–inorganic perovskites (HOIPs) have recently drawn intense attention as potential photovoltaic materials. However, n = 1 two-dimensional (2D) HOIPs face the challenge of low conductivity between the inorganic layers, leading to unsatisfactory device performance. Interestingly, 2D HOIPs employing π-conjugated molecules as organic moieties show energy and charge transfers between organic and inorganic layers, indicating potentially efficient carrier transport for photovoltaic applications. Nevertheless, the development of 2D HOIP-based solar cells especially utilizing polycyclic aromatic alkylammonium as cations is in its infancy. Herein, we investigated the electronic structure and band alignment of a series of n = 1 2D Ruddlesden–Popper (RP) phase HOIPs containing different polycyclic aromatic groups and alkyl chains, based on density functional theory calculations. We find that the polycyclic aromatic group plays an important role in controlling the functionality of 2D HOIPs by directly modifying band-edge states, and the band alignment at the organic–inorganic interface can be designed to promote either exciton trapping or dissociation for light-emitting or photovoltaic applications, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Composition-Dependent Photoluminescence Properties and Anti-Counterfeiting Applications of A 2 AgX 3 (A = Rb, Cs; X = Cl, Br, I)

Copper(I) halides are emerging as attractive alternatives to lead halide perovskites for optical and electronic applications. However, blue-emitting all-inorganic copper(I) halides suffer from poor stability and lack of tunability of their photoluminescence (PL) properties. In this work, the preparation of silver(I) halides A 2 AgX 3 (A = Rb, Cs; X = Cl, Br, I) through solid-state synthesis is reported. In contrast to the Cu(I) analogs, A 2 AgX 3 are broad-band emitters sensitive to A and X site substitutions. First-principle calculations show that defect-bound excitons are responsible for the observed main PL peaks in Rb 2 AgX 3 and that self-trapped excitons (STEs) contribute to a minor PL peak in Rb 2 AgBr 3 . This is in sharp contrast to Rb 2 CuX 3 , in which the PL is dominated by the emission by STEs. Moreover, the replacement of Cu(I) with Ag(I) in A 2 AgX 3 significantly improves photostability and stability in the air under ambient conditions, which enables their consideration for practical applications. Thus, luminescent inks based on A 2 AgX 3 are prepared and successfully used in anti-counterfeiting applications. The excellent light emission properties, significantly improved stability, simple preparation method, and tunable light emission properties demonstrated by A 2 AgX 3 suggest that silver(I) halides may be attractive alternatives to toxic lead halide perovskites and unstable copper(I) halides for optical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Metal Halide Scaffolded Assemblies of Organic Molecules with Enhanced Emission and Room Temperature Phosphorescence

Ionically bonded organic metal halide hybrids have emerged as versatile multicomponent material systems exhibiting unique and useful properties. The unlimited combinations of organic cations and metal halides lead to the tremendous structural diversity of this class of materials, which could unlock many undiscovered properties of both organic cations and metal halides. Here we report the synthesis and characterization of a series benzoquinolinium (BZQ) metal halides with a general formula (BZQ)Pb 2 X 5 (X = Cl, Br), in which metal halides form a unique two-dimensional (2D) structure. These BZQ metal halides are found to exhibit enhanced photoluminescence and stability as compared to the pristine BZQ halides, due to the scaffolding effects of 2D metal halides. Optical characterizations and theoretical calculations reveal that BZQ + cations are responsible for the emissions in these hybrid materials. Changing the halide from Cl to Br introduces heavy atom effects, resulting in yellow room temperature phosphorescence (RTP) from BZQ + cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Design of High-Performance Lead-Free Quaternary Antiperovskites for Photovoltaics via Ion Type Inversion and Anion Ordering

The emergence of halide double perovskites significantly increases the compositional space for lead-free and air-stable photovoltaic absorbers compared to halide perovskites. Nevertheless, most halide double perovskites exhibit oversized band gaps (>1.9 eV) or dipole-forbidden optical transition, which are unfavorable for efficient single-junction solar cell applications. The current device performance of halide double perovskite is still inferior to that of lead-based halide perovskites, such as CH 3 NH 3 PbI 3 (MAPbI 3 ). Here, by ion type inversion and anion ordering on perovskite lattice sites, two new classes of pnictogen-based quaternary antiperovskites with the formula of X 6 B 2 AA' and X 6 BB'A 2 are designed. Phase stability and tunable band gaps in these quaternary antiperovskites are demonstrated based on first-principles calculations. Further photovoltaic-functionality-directed screening of these materials leads to the discovery of 5 stable compounds (Ca 6 N 2 AsSb, Ca 6 N 2 PSb, Sr 6 N 2 AsSb, Sr 6 N 2 PSb, and Ca 6 NPSb 2 ) with suitable direct band gaps, small carrier effective masses and low exciton binding energies, and dipole-allowed strong optical absorption, which are favorable properties for a photovoltaic absorber material. The calculated theoretical maximum solar cell efficiencies based on these five compounds are all larger than 29%, comparable to or even higher than that of the MAPbI 3 based solar cell. Finally, our work reveals the huge potential of quaternary antiperovskites in the optoelectronic field and provides a new strategy to design lead-free and air-stable perovskite-based photovoltaic absorber materials.

three-dimensional electronic transport↗
DOE OSTI2021

Magnetic properties of the Shastry-Sutherland lattice material BaNd 2 ZnO 5

We investigate the physical properties of the Shastry-Sutherland lattice material BaNd 2 ZnO 5 . Neutron diffraction, magnetic susceptibility, and specific heat measurements reveal antiferromagnetic order below 1.65 K. The magnetic order is found to be a 2–Q magnetic structure with the magnetic moments lying in the Shastry-Sutherland lattice planes comprising the tetragonal crystal structure of BaNd 2 ZnO 5 . The ordered moment for this structure is 1.9(1) μB per Nd ion. Inelastic neutron scattering measurements reveal that the crystal field ground state doublet is well separated from the first excited state at 8 meV. The crystal field Hamiltonian is determined through simultaneous refinement of models with both the LS coupling and intermediate coupling approximations to the inelastic neutron scattering and magnetic susceptibility data. The ground state doublet indicates that the magnetic moments lie primarily in the basal plane with magnitude consistent with the size of the determined ordered moment.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Hierarchical excitations from correlated spin tetrahedra on the breathing pyrochlore lattice

The hierarchy of the coupling strengths in a physical system often engenders an effective model at low energies where the decoupled high-energy modes are integrated out. Here, using neutron scattering, we show that the spin excitations in the breathing pyrochlore lattice compound CuInCr 4 S 8 are hierarchical and can be approximated by an effective model of correlated tetrahedra at low energies. At higher energies, intratetrahedron excitations together with strong magnon-phonon couplings are observed, which suggests the possible role of the lattice degree of freedom in stabilizing the spin tetrahedra. Finally, our work illustrates the spin dynamics in CuInCr 4 S 8 and demonstrates a general effective-cluster approach to understand the dynamics on the breathing-type lattices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Intrinsic and complex defect engineering of quasi-one-dimensional ribbons Sb 2 S 3 for photovoltaics performance

Sb 2 S 3 has attracted great attention recently as a prospective solar cell absorber material. In this work, intrinsic defects, dopants, and their complexes in Sb 2 S 3 are systematically investigated by using hybrid functional theory. V Sb and V S are dominant native defects and pin the Fermi level near the midgap, which is consistent with the high resistivity observed experimentally. Both V Sb and V S introduce deep levels inside the band gap, which can trap free carriers. Our calculated deep transition levels of V Sb and Sb S are consistent well with the results of the deep-level transient spectroscopy measurement. We further study dopants (including Cu, Ti, Zn, Br, and Cl) in Sb 2 S 3 and find that Zn and Br/Cl are shallow acceptors and donors, respectively, which may be used to control the carrier and trap densities in Sb 2 S 3 . In addition, the defect complexes, i.e., Cu(Zn) Sb +V S and Cl(Br) S +V Sb are also investigated. The interaction between the donor and acceptor defects makes the defect levels of complexes shallower and less detrimental to carrier transport.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Crystal growth, density functional theory, and scintillation properties of Tl 3 LnCl 6 :Ce 3+ and TlLn 2 Cl 7 :Ce 3+ (Ln = Y, Gd)

In this paper we report on the crystal growth, density functional theory (DFT) calculations and scintillation properties of Tl 3 LnCl 6 :Ce and TlLn 2 Cl 7 :Ce(Ln = Y, Gd). Crystals were grown by the Vertical Bridgman technique up to 16 mm in diameter and 25 mm long. Crystals of Tl 3 YCl 6 :Ce and Tl 3 GdCl 6 :Ce belong to the family of the Nesohalides which have the monoclinic crystal structure. Crystals of TlY 2 Cl 7 :Ce and TlGd 2 Cl 7 :Ce belong to the family of the Phyllohalides which have either the monoclinic or the orthorhombic crystal structure. We report the light yields of these Nesohalides and Phyllohalides are typically on the order of 35,000–40,000 ph/MeV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Zero-Dimensional Hybrid Organic–Inorganic Indium Bromide with Blue Emission

Low-dimensional hybrid organic–inorganic metal halides have received increased attention because of their outstanding optical and electronic properties. However, the most studied hybrid compounds contain lead and have long-term stability issues, which must be addressed for their use in practical applications. In this work, we report a new zero-dimensional hybrid organic–inorganic halide, RInBr 4 , featuring photoemissive trimethyl(4-stilbenyl)methylammonium (R + ) cations and nonemissive InBr 4 – tetrahedral anions. The crystal structure of RInBr 4 is composed of alternating layers of inorganic anions and organic cations along the crystallographic a axis. The resultant hybrid demonstrates bright-blue emission with Commission Internationale de l’Eclairage color coordinates of (0.19, 0.20) and a high photoluminescence quantum yield (PLQY) of 16.36% at room temperature, a 2-fold increase compared to the PLQY of 8.15% measured for the precursor organic salt RBr. On the basis of our optical spectroscopy and computational work, the organic component is responsible for the observed blue emission of the hybrid material. In addition to the enhanced light emission efficiency, the novel hybrid indium bromide demonstrates significantly improved environmental stability. These findings may pave the way for the consideration of hybrid organic In(III) halides for light emission applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗