Search NASA⌕ Search

Engineering topics

Du, Yong

Publications and source records attributed to Du, Yong.

Probing Molecular Packing of Amorphous Pharmaceutical Solids Using X-ray Atomic Pair Distribution Function and Solid-State NMR

The structural investigation of amorphous pharmaceuticals is of paramount importance in comprehending their physicochemical stability. However, it has remained a relatively underexplored realm primarily due to the limited availability of high-resolution analytical tools. Here in this study, we utilized the combined power of X-ray pair distribution functions (PDFs) and solid-state nuclear magnetic resonance (ssNMR) techniques to probe the molecular packing of amorphous posaconazole and its amorphous solid dispersion at the molecular level. Leveraging synchrotron X-ray PDF data and employing the empirical potential structure refinement (EPSR) methodology, we unraveled the existence of a rigid conformation and discerned short-range intermolecular C–F contacts within amorphous posaconazole. Encouragingly, our ssNMR 19 F– 13 C distance measurements offered corroborative evidence supporting these findings. Furthermore, employing principal component analysis on the X-ray PDF and ssNMR data sets enabled us to gain invaluable insights into the chemical nature of the intermolecular interactions governing the drug–polymer interplay. These outcomes not only furnish crucial structural insights facilitating the comprehension of the underlying mechanisms governing the physicochemical stability but also underscore the efficacy of synergistically harnessing X-ray PDF and ssNMR techniques, complemented by robust modeling strategies, to achieve a high-resolution exploration of amorphous structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Forward Physics Facility at the High-Luminosity LHC

High energy collisions at the High-Luminosity Large Hadron Collider (LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe standard model (SM) processes and search for physics beyond the standard model (BSM). In this report, we review the status of the civil engineering plans and the experiments to explore the diverse physics signals that can be uniquely probed in the forward region. FPF experiments will be sensitive to a broad range of BSM physics through searches for new particle scattering or decay signatures and deviations from SM expectations in high statistics analyses with TeV neutrinos in this low-background environment. High statistics neutrino detection will also provide valuable data for fundamental topics in perturbative and non-perturbative QCD and in weak interactions. Experiments at the FPF will enable synergies between forward particle production at the LHC and astroparticle physics to be exploited. We report here on these physics topics, on infrastructure, detector, and simulation studies, and on future directions to realize the FPF’s physics potential.

47 OTHER INSTRUMENTATION↗

The Forward Physics Facility: Sites, experiments, and physics potential

The Forward Physics Facility (FPF) is a proposal to create a cavern with the space and infrastructure to support a suite of far-forward experiments at the Large Hadron Collider during the High Luminosity era. Located along the beam collision axis and shielded from the interaction point by at least 100 m of concrete and rock, the FPF will house experiments that will detect particles outside the acceptance of the existing large LHC experiments and will observe rare and exotic processes in an extremely low-background environment. In this work, we summarize the current status of plans for the FPF, including recent progress in civil engineering in identifying promising sites for the FPF and the experiments currently envisioned to realize the FPF’s physics potential. We then review the many Standard Model and new physics topics that will be advanced by the FPF, including searches for long-lived particles, probes of dark matter and dark sectors, high-statistics studies of TeV neutrinos of all three flavors, aspects of perturbative and non-perturbative QCD, and high-energy astroparticle physics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Non-standard interactions in SMEFT confronted with terrestrial neutrino experiments

The Standard Model Effective Field Theory (SMEFT) provides a systematic and model-independent framework to study neutrino non-standard interactions (NSIs). We study the constraining power of the on-going neutrino oscillation experiments T2K, NO ν A, Daya Bay, Double Chooz and RENO in the SMEFT framework. A full consideration of matching is provided between different effective field theories and the renormalization group running at different scales, filling the gap between the low-energy neutrino oscillation experiments and SMEFT at the UV scale. We first illustrate our method with a top- down approach in a simplified scalar leptoquark model, showing more stringent constraints from the neutrino oscillation experiments compared to collider studies. We then provide a bottom-up study on individual dimension-6 SMEFT operators and find NSIs in neutrino experiments already sensitive to new physics at ~20 TeV when the Wilson coefficients are fixed at unity. We also investigate the correlation among multiple operators at the UV scale and find it could change the constraints on SMEFT operators by several orders of magnitude compared with when only one operator is considered. Furthermore, we find that accelerator and reactor neutrino experiments are sensitive to different SMEFT operators, which highlights the complementarity of the two experiment types.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Collider probes of real triplet scalar dark matter

We study discovery prospects for a real triplet extension of the Standard Model scalar sector at the Large Hadron Collider (LHC) and a possible future 100 TeV $\mathcal{pp}$ collider. We focus on the scenario in which the neutral triplet scalar is stable and contributes to the dark matter relic density. When produced in $\mathcal{pp}$ collisions, the charged triplet scalar decays to the neutral component plus a soft pion or soft lepton pair, yielding a disappearing charged track in the detector. We recast current 13 TeV LHC searches for disappearing tracks, and find that the LHC presently excludes a real triplet scalar lighter than 248 (275) GeV, for a mass splitting of 172 (160) MeV with $\mathcal{L}$ = 36 fb –1 . The reach can extend to 497 (520) GeV with the collection of 3000 fb –1 . We extrapolate the 13 TeV analysis to a prospective 100 TeV pp collider, and find that a ~ 3 TeV triplet scalar could be discoverable with $\mathcal{L}$ = 30 ab –1 , depending on the degree to which pile up effects are under control. We also investigate the dark matter candidate in our model and corresponding present and prospective constraints from dark matter direct detection. We find that currently XENON1T can exclude a real triplet dark matter lighter than ~ 3 TeV for a Higgs portal coupling of order one or larger, and the future XENON20T will cover almost the entire dark matter viable parameter space except for vanishingly small portal coupling.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Freeze-in dark matter from secret neutrino interactions

We investigate a simplified freeze-in dark-matter model in which the dark matter only interacts with the standard-model neutrinos via a light scalar. The extremely small coupling for the freeze-in mechanism is naturally realized in several neutrino-portal scenarios with the secret neutrino interactions. We study possible evolution history of the hidden sector: the dark sector would undergo pure freeze-in production if the interactions between the dark-sector particles are negligible, while thermal equilibrium within the dark sector could occur if the reannihilation of the dark matter and the scalar mediator is rapid enough. We investigate the relic abundance in the freeze-in and dark freeze-out regimes, calculate evolution of the dark temperature, and study its phenomenological aspects on BBN and CMB constraints, the indirect-detection signature, as well as the potential to solve the small scale structure problem.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Type-II seesaw scalar triplet model at a 100 TeV pp collider: discovery and higgs portal coupling determination

We investigate the collider phenomenology of the scalar triplet particles in the Type-II seesaw model at a 100 TeV pp collider. Depending on triplet vacuum expectation value v Δ , the dominant discovery channels could be H ++ H -- and H ±± H ∓ . We find the H ±± H ∓ → W ± W ± hW ∓ /ℓ ± ℓ ± hW ∓ channels are promising for both model discovery at relatively large v Δ and determination of the Higgs portal couplings λ 4 and λ 5 . We also find that these two channels are complementary to indirect determination of λ 4 from future precise measurements on h → γγ decay rate. Together with pair production of the doubly-charged Higgs subsequently decaying into same-sign di-leptons, the H ±± H ∓ channels have the potential to cover a significant portion of the parameter space of the Type-II seesaw complex scalar triplet model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Evolution of Second-Phase Particles in 6111 Aluminum Alloy Processed by Hot and Cold Rolling

The evolution of coarse Al{sub 9.9}Fe{sub 2.65}Ni{sub 1.45} phase, spherical Al{sub 12}(Mn,Fe){sub 3}Si phase and rod-like Q phase in a 6111 aluminum alloy during hot and cold rolling deformation processes was systematically investigated in this work. The results showed that the coarse Al{sub 9.9}Fe{sub 2.65}Ni{sub 1.45} particles are mainly distributed at the grain boundaries, accompanied by the co-formation of Al{sub 12}(Fe,Mn){sub 3}Si phase and Mg{sub 2}Si phase, while the spherical Al{sub 12}(Mn,Fe){sub 3}Si particles are mainly distributed in the grain interiors. Hot rolling has little effects on the size and distribution of both phases, but cold deformation can severely decrease the size of the particles by breaking the particles into small pieces. In addition, the temperature of 450 °C is not high enough for the dissolution of Q phase in the Al matrix, but the Q particles can be broken into small pieces due to the stress concentration during both hot and cold rolling deformation. In addition, the influences of phase evolution, dislocations and recrystallization on the mechanical properties evolution were also discussed.

36 MATERIALS SCIENCE↗

Ameliorated mechanical and thermal properties of SiC reinforced Al matrix composites through hybridizing carbon nanotubes

Highlights: • The carbon nanotubes were hybridized into SiC reinforced Al based composites. • Hybridization of CNTs leads to the uniform dispersion of SiC in the Al matrix. • Hybridization of CNTs enhances the strength and ductility of the composites. • CNTs can help to decrease the coefficient of thermal expansion of the composites. - Abstract: By hybridizing carbon nanotubes (CNTs) into SiC reinforced Al matrix composites, a novel composite was fabricated to achieve excellent mechanical properties and low coefficient of thermal expansion simultaneously. The study demonstrated that the CNTs can help to acquire the uniform dispersion of SiC particles in the Al matrix, because of their interaction during ball milling and hot rolling processes. In addition, the results revealed that such design optimizes both the mechanical and thermal properties, due to homogeneous microstructure as well as tight and uniform interfaces induced by the addition of CNTs. Strengthening mechanism and Sideridis's model were used to discuss the effects of the CNTs on the mechanical and thermal properties. This study opens up an unexplored avenue for simultaneous improvement of the mechanical and thermal properties of metal matrix composites.

36 MATERIALS SCIENCE↗

Insight into γ-Ni/γ'-Ni 3 Al interfacial energy affected by alloying elements

Interfacial energy (σ γ/γ' ) of the γ-Ni/γ'-Ni 3 Al interface is critical to understand and design Ni-based superalloys. Here, in the present work, a first-principles methodology with constrained relaxations has been used to study the effect of dilute alloying element (X) on σ γ/γ' of the (100) coherent interface, where the sixteen X's include Al, Co, Cr, Fe, Hf, Mo, Nb, Pd, Pt, Re, Ru, Ta, Ti, W, Y, and Zr. σ γ/γ' = 19 mJ/m 2 has been predicted for the unalloyed γ/γ' interface, agreeing well with the previous estimations. It is found that the σ γ/γ' value is the lowest when alloying element is in γ-Ni, while the addition to γ'-Ni 3 Al increases σ γ/γ' due mainly to the in-plane lattice expansion. Specifically, our calculations show that alloying elements Mo, W, and Re have the largest effect on the σ γ/γ' value by decreasing it to 4–5 mJ/m 2 when partitioned to γ-Ni; Ru and Pt are shown to increase greatly the σ γ/γ' value up to 25–28 mJ/m 2 when partitioned to γ-Ni; all ternary additions substituting for Ni in γ'-Ni 3 Al increase σ γ/γ' except for Pt; and for Ti and Ta, which segregate strongly to γ'-Ni 3 Al and substitute for Al, the σ γ/γ' values increase to 32 and 35 mJ/m 2 , respectively.

36 MATERIALS SCIENCE↗

Quantitative measurement for the microstructural parameters of nano-precipitates in Al-Mg-Si-Cu alloys

Size, number density and volume fraction of nano-precipitates are important microstructural parameters controlling the strengthening of materials. In this work a widely accessible, convenient, moderately time efficient method with acceptable accuracy and precision has been provided for measurement of volume fraction of nano-precipitates in crystalline materials. The method is based on the traditional but highly accurate technique of measuring foil thickness via convergent beam electron diffraction. A new equation is proposed and verified with the aid of 3-dimensional atom probe (3DAP) analysis, to compensate for the additional error resulted from the hardly distinguishable contrast of too short incomplete precipitates cut by the foil surface. The method can be performed on a regular foil specimen with a modern LaB{sub 6} or field-emission-gun transmission electron microscope. Precisions around ± 16% have been obtained for precipitate volume fractions of needle-like β″/C and Q precipitates in an aged Al-Mg-Si-Cu alloy. The measured number density is close to that directly obtained using 3DAP analysis by a misfit of 4.5%, and the estimated precision for number density measurement is about ± 11%. The limitations of the method are also discussed. - Highlights: •A facile method for measuring volume fraction of nano-precipitates based on CBED •An equation to compensate for small invisible precipitates, with 3DAP verification •Precisions around ± 16% for volume fraction and ± 11% for number density.

36 MATERIALS SCIENCE↗

Exploring phase stability, electronic and mechanical properties of Ce–Pb intermetallic compounds using first-principles calculations

The phase stability, electronic and mechanical properties of Ce–Pb intermetallics have been investigated by using first-principles calculations. Five stable and four metastable phases of Ce–Pb intermetallics were verified. Among them, CePb{sub 2} has been confirmed as HfGa{sub 2}-type structure. For Ce{sub 5}Pb{sub 3}, the high pressure phase transformation from D8{sub m} to D8{sub 8} with trivalent Ce has been predicted to occur at P=1.2 GPa and a high temperature phase transformation has been predicted from D8{sub m} to D8{sub 8} with tetravalent Ce at 531.5 K. The calculated lattice constants of the five stable phases are in good agreement with experimental values. The electronic density of states, charge density and electron localization function of Ce{sub 3}Pb have been calculated, which indicated that the Ce and Pb show ionic behavior. The polycrystalline bulk modulus, shear modulus, Young's modulus, and Poisson's ratio are also estimated from the calculated single crystalline elastic constants. All of the calculated elastic constants satisfy mechanical stability criteria. The microhardness and mechanical anisotropy are predicted. The anisotropic nature of the Ce–Pb intermetallic compounds are demonstrated by the three-dimensional orientation dependent surfaces of Young's moduli and linear compressibility are also demonstrated. The longitudinal, transverse and average sound velocities and the Debye temperatures are also obtained in this work. The Ce{sub 3}Pb has the largest Debye temperature of 192.6 K, which means the Ce{sub 3}Pb has a highest melting point and high thermal conductivity than other compounds. - Graphical abstract: The convex hull plots of the enthalpies of formation for Ce–Pb binary systems calculated at 0 K. - Highlights: • The five stable and four metastable phases in the Ce–Pb binary system were predicted. • The crystal structure of CePb{sub 2} has been confirmed as HfGa{sub 2}-type.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid state phase equilibria and intermetallic compounds of the Al-Cr-Ho system

The solid state phase equilibria of the Al-Cr-Ho ternary system at 500 Degree-Sign C were experimentally investigated. The phase relations at 500 Degree-Sign C are governed by 14 three-phase regions, 29 two-phase regions and 15 single-phase regions. The existences of 10 binary compounds and 2 ternary phases have been confirmed. Al{sub 11}Cr{sub 2}, Al{sub 11}Cr{sub 4} and Al{sub 17}Ho{sub 2} were not found at 500 Degree-Sign C. Crystal structures of Al{sub 9}Cr{sub 4} and Al{sub 8}Cr{sub 4}Ho were determined by the Rietveld X-ray powder data refinement. Al{sub 9}Cr{sub 4} was found to exhibit cubic structure with space group I4-bar 3m (no. 217) and lattice parameters a=0.9107(5) nm. Al{sub 8}Cr{sub 4}Ho crystallizes in ThMn{sub 12} structure type with space group I4/mmm (no. 139) and lattice parameters a=0.8909(4) nm, c=0.5120(5) nm. It is concluded that the obtained Al{sub 4}Cr phase in this work should be {mu}-Al{sub 4}Cr by comparing with XRD pattern of the hexagonal {mu}-Al{sub 4}Mn compound. - Graphical abstract: The solid state phase equilibria of the Al-Cr-Ho ternary system at 500 Degree-Sign C. Highlights: Black-Right-Pointing-Pointer Al-Cr-Ho system has been investigated. Black-Right-Pointing-Pointer Al{sub 9}Cr{sub 4} has cubic structure with space group I4-bar 3m. Black-Right-Pointing-Pointer Al{sub 8}Cr{sub 4}Ho crystallizes in ThMn{sub 12} type with space group I4/mmm. Black-Right-Pointing-Pointer Al{sub 4}Cr phase is {mu}-type at 500 Degree-Sign C.

36 MATERIALS SCIENCE↗