Search NASA⌕ Search

Engineering topics

Du, Yu

Publications and source records attributed to Du, Yu.

Interleaved multi-channel, multi-level, multi-quadrant DC-DC converters

Direct-current-to-direct-current (DC-DC) power converters that include two or more multi-quadrant, multi-level, DC-DC, switching converter subcircuits, connected in parallel at respective input and output sides, so as to provide a multi-channel, multi-quadrant, multi-level configuration, are disclosed. The DC-DC power converters further include a control circuit configured to control the switching converter subcircuits so that corresponding switching semiconductors in each of the switching converter subcircuits are switched in an interleaved manner. In some embodiments, each of the switching converter subcircuits is a three-level, neutral-point-clamped, four-quadrant DC-DC converter circuit. In other embodiments, each of the switching converter subcircuits is a three-level, neutral-point-clamped, two-quadrant DC-DC converter circuit. In any of these embodiments, a filter capacitor may be connected between across a pair of output terminals at the output sides of the switching converter subcircuits.

Du, Yu↗

Modular, multi-channel, interleaved power converters

A multi-phase power converter includes two or more multi-phase, bi-directional, multi-level, switching power converter subcircuits, connected in parallel at respective AC and DC sides, so as to provide a multi-channel, bi-directional, multi-level configuration. The AC sides of the switching converter subcircuits are directly coupled to one another and to a multi-phase AC input via series interface reactors, and the DC sides of the switching converter subcircuits are directly connected to one another and to a common split-capacitor bank at each level of the multi-level outputs of the switching converter subcircuits. A control circuit is configured to selectively control one or more switching semiconductor devices in each of the switching converter subcircuits. In some embodiments, the control circuit includes a closed-loop zero-sequence controller and a zero-sequence generator configured to eliminate circulating current among the switching converter subcircuits and to balance voltages across levels of the common split-capacitor bank.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Hexagonal layered group IV–VI semiconductors and derivatives: fresh blood of the 2D family

New phases of group IV–VI semiconductors in 2D hexagonal structures are predicted and their unusual physical properties are revealed. The structures of monolayer group IV–VI semiconductors are similar to those of blue phosphorene and each unit has the same ten valence electrons. The band gap of 2D hexagonal group IV–VI semiconductors depends on both the thickness and stacking order. Atomic functionalization can induce ferromagnetism, and the Curie temperature can be tuned. Gapped Dirac fermions with zero mass are developed and this makes it exceed that of graphene. Finally, the Fermi velocity can be compared to or even above that of graphene.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modulating Blue Phosphorene by Synergetic Codoping: Indirect to Direct Gap Transition and Strong Bandgap Bowing

The structural and electronic properties of synergistically modified blue phosphorene (BP) is investigated. The inversion and threefold rotational symmetries of BP are broken. The codoping of group IV and VI impurities can turn monolayer BP into direct bandgap semiconductors. The underlying physical mechanism is that group IV and VI impurities tailor the valence band maximum and conduction band minimum, respectively, and move them to Γ. All the bandgaps of monolayer, nanoribbons, and quantum dots of BP can be modulated in a wide range, and the strong bandgap bowing is found. In addition, the Coulomb interactions between the screened impurities are revealed. Lower formation energies indicate the fabricating practicability of synergeticly modified BP. Finally, spin–orbit coupling (SOC) can also be tuned by the introduction of impurities.

36 MATERIALS SCIENCE↗

Oxidative cyclizations in orthosomycin biosynthesis expand the known chemistry of an oxygenase superfamily

Orthosomycins are oligosaccharide antibiotics that include avilamycin, everninomicin, and hygromycin B and are hallmarked by a rigidifying interglycosidic spirocyclic ortho-δ-lactone (orthoester) linkage between at least one pair of carbohydrates. A subset of orthosomycins additionally contain a carbohydrate capped by a methylenedioxy bridge. The orthoester linkage is necessary for antibiotic activity but rarely observed in natural products. Orthoester linkage and methylenedioxy bridge biosynthesis require similar oxidative cyclizations adjacent to a sugar ring. In this paper, we have identified a conserved group of nonheme iron, α-ketoglutarate–dependent oxygenases likely responsible for this chemistry. High-resolution crystal structures of the EvdO1 and EvdO2 oxygenases of everninomicin biosynthesis, the AviO1 oxygenase of avilamycin biosynthesis, and HygX of hygromycin B biosynthesis show how these enzymes accommodate large substrates, a challenge that requires a variation in metal coordination in HygX. Excitingly, the ternary complex of HygX with cosubstrate α-ketoglutarate and putative product hygromycin B identified an orientation of one glycosidic linkage of hygromycin B consistent with metal-catalyzed hydrogen atom abstraction from substrate. These structural results are complemented by gene disruption of the oxygenases evdO1 and evdMO1 from the everninomicin biosynthetic cluster, which demonstrate that functional oxygenase activity is critical for antibiotic production. Finally, our data therefore support a role for these enzymes in the production of key features of the orthosomycin antibiotics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical spring effect in nanoelectromechanical systems

In this Letter, we report a hybrid system consisting of nano-optical and nano-mechanical springs, in which the optical spring effect works to adjust the mechanical frequency of a nanoelectromechanical systems resonator. Nano-scale folded beams are fabricated as the mechanical springs and double-coupled one-dimensional photonic crystal cavities are used to pump the “optical spring.” The dynamic characteristics of this hybrid system are measured and analyzed at both low and high input optical powers. This study leads the physical phenomenon of optomechanics in complex nano-opto-electro-mechanical systems (NOEMS) and could benefit the future applications of NOEMS in chip-level communication and sensing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental and Numerical Investigation of Propellant of Different Thickness for Laser Micro Propulsion

The thickness of propellant is an important experimental parameter under T-mode, which has a direct impact on the performance of the laser Micro propulsion. In this paper, the prolusion performance of four propellants with different thickness is measured respectively, the experimental results show that the momentum coupling coefficient C{sub m} rises with the increase of thickness, while the specific impulse I{sub sp} falls on the contrary. The same trend for I{sub sp} also has been obtained from the simulated result by the Discrete Element Program (DEM).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗