Engineering topics

Duenkel, Stefan

Publications and source records attributed to Duenkel, Stefan.

3 records

DOE OSTI2024

Ferroelectric FET-based context-switching FPGA enabling dynamic reconfiguration for adaptive deep learning machines

Field programmable gate array (FPGA) is widely used in the acceleration of deep learning applications because of its reconfigurability, flexibility, and fast time-to-market. However, conventional FPGA suffers from the trade-off between chip area and reconfiguration latency, making efficient FPGA accelerations that require switching between multiple configurations still elusive. Here, we propose a ferroelectric field-effect transistor (FeFET)–based context-switching FPGA supporting dynamic reconfiguration to break this trade-off, enabling loading of arbitrary configuration without interrupting the active configuration execution. Leveraging the intrinsic structure and nonvolatility of FeFETs, compact FPGA primitives are proposed and experimentally verified. The evaluation results show our design shows a 63.0%/74.7% reduction in a look-up table (LUT)/connection block (CB) area and 82.7%/53.6% reduction in CB/switch box power consumption with a minimal penalty in the critical path delay (9.6%). Besides, our design yields significant time savings by 78.7 and 20.3% on average for context-switching and dynamic reconfiguration applications, respectively.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2022

On the Feasibility of 1T Ferroelectric FET Memory Array

To fully exploit the ferroelectric field effect transistor (FeFET) as compact embedded nonvolatile memory for various computing and storage applications, it is desirable to use a single FeFET (1T) as a unit cell and arrange the cells into an array. However, many write mechanisms for an 1T FeFET array reported in the literature are yet to be validated experimentally. In this work, we performed a comprehensive experimental characterization on the write operations in an 1T- NOR and 1T- AND array using n-channel bulk FeFETs. We discovered that: 1) the source/drain contact can only supply minority carriers (i.e., electrons) to the channel for polarization screening during the low- V TH state programming; 2) the body contact can not only supply majority carriers (i.e., holes) for efficient high- V TH state write, but also depletion charge for low- V TH state programming, though with lower efficiency; and 3) during the low/high- V TH programming, only the path that can supply negative/positive screening charges, respectively, need to respond, which necessitates the application of proper write biases on the corresponding terminal. Based on the understanding of these write mechanisms, we show the importance of localized body contact or column-wise body contact for the successful high- V TH state programming. We also show that the previously proposed C- AND write scheme fails to program the FeFET to the low- V TH state for our devices. Finally, we propose several write schemes for both 1T- AND and 1T- NOR arrays for various scenarios providing insights for choosing the appropriate write scheme, which will facilitate the adoption of 1T FeFET memory arrays for emerging applications.

FeFET↗

DOE OSTI2022

Hardware functional obfuscation with ferroelectric active interconnects

Existing circuit camouflaging techniques to prevent reverse engineering increase circuit-complexity with significant area, energy, and delay penalty. In this paper, we propose an efficient hardware encryption technique with minimal complexity and overheads based on ferroelectric field-effect transistor (FeFET) active interconnects. By utilizing the threshold voltage programmability of the FeFETs, run-time reconfigurable inverter-buffer logic, utilizing two FeFETs and an inverter, is enabled. Judicious placement of the proposed logic makes it act as a hardware encryption key and enable encoding and decoding of the functional output without affecting the critical path timing delay. Additionally, a peripheral programming scheme for reconfigurable logic by reusing the existing scan chain logic is proposed, obviating the need for specialized programming logic and circuitry for keybit distribution. Our analysis shows an average encryption probability of 97.43% with an increase of 2.24%/ 3.67% delay for the most critical path/ sum of 100 critical paths delay for ISCAS85 benchmarks.

42 ENGINEERING↗