Synthesis and equation of state of perovskite in the (Mg,Fe)[subscript 3]Al[subscript 2]Si[subscript 3]O[subscript 12] system to 177 GPa
Abstract not provided
Engineering topics
Publications and source records attributed to Duffy, Thomas S.
Abstract not provided
To understand the effect of hydration on the sound velocities of major mantle minerals and to constrain the mantle's H{sub 2}O budget, we have measured the single-crystal elastic moduli of hydrous ringwoodite, (Mg{sub 1.633}Fe{sub 0.231}{sup 2+}Fe{sub 0.026}{sup 3+})Si{sub 1.00}H{sub 0.179}O{sub 4} with 1.1 wt.% H{sub 2}O using Brillouin scattering combined with X-ray diffraction in an externally-heated diamond anvil cell up to 16 GPa and 673 K. Up to 12 GPa at 300 K, the presence of 1.1 wt.% H{sub 2}O lowers the elastic moduli of ringwoodite by 5-9%, but does not affect the pressure derivatives of the elastic moduli compared to anhydrous ringwoodite. The reduction caused by hydration is significantly enhanced when temperatures are elevated at high pressures. At 12 GPa, increasing temperature by {Delta}T = 100 K leads to a 1.3-2.4% reduction in the elastic moduli (C{sub 11}, C{sub 12}, and C{sub 14}). Comparing our results with seismic observations, we have evaluated the potential H{sub 2}O content in the lower part of the transition zone. Our results indicate that the observed seismic velocity anomalies and related depth depression of the 660-km discontinuity could be attributed to thermal variations together with the presence of {approx} 0.1 wt.% H{sub 2}O.
Phase transitions and equations of state of the alkaline earth fluorides CaF{sub 2}, SrF{sub 2}, and BaF{sub 2} were examined by static compression to pressures as high as 146 GPa. Angle-dispersive x-ray diffraction experiments were performed on polycrystalline samples in the laser-heated diamond-anvil cell. We confirmed that at pressures less than 10 GPa all three materials undergo a phase transition from the cubic (Fm{bar 3} m) fluorite structure to the orthorhombic (Pnam) cotunnite-type structure. This work has characterized an additional phase transition in CaF{sub 2} and SrF{sub 2}: these materials were observed to transform to a hexagonal (P6{sub 3}/mmc) Ni{sub 2}In-type structure between 63-79 GPa and 28-29 GPa, respectively, upon laser heating. For SrF{sub 2}, the Ni{sub 2}In-type phase was confirmed by Rietveld refinement. Volumes were determined as a function of pressure for all high-pressure phases and fit to the third-order Birch-Murnaghan equation of state. For CaF{sub 2} and SrF{sub 2}, the fluorite-cotunnite transition results in a volume decrease of 8-10%, while the bulk modulus of the cotunnite-type phase is the same or less than that of the fluorite phase within uncertainty. For all three fluorides, the volume reduction associated with the further transition to the Ni{sub 2}In-type phase is {approx}5%. The percentage increase in the bulk modulus ({Delta}K) across the transition is greater when the cation is smaller. While for BaF{sub 2}, {Delta}K is 10-30%, {Delta}K values for SrF{sub 2} and CaF{sub 2} are 45-65% and 20-40%. Although shock data for CaF{sub 2} have been interpreted to show a transition to a highly incompressible phase above 100 GPa, this is not consistent with our static equation of state data.
At near ambient conditions, CaIrO{sub 3} is isostructural with the high-pressure polymorph MgSiO{sub 3} 'post-perovskite' (pPv). MgSiO{sub 3} pPv is thought to be a major phase in the earth's lowermost mantle. CaIrO{sub 3} can thus serve as an analog for studying deformation of the pPv phase under conditions achievable with a multi-anvil deformation apparatus. Here we study the rheologic behavior of CaIrO{sub 3} pPv at a variety of pressure and temperature conditions from 2 GPa to 6 GPa and 300 K to 1300 K and various strain rates. Sintered, polycrystalline CaIrO{sub 3} pPv, cylindrical in shape, was deformed in the D-DIA multi-anvil press in several shortening cycles up to 20% axial strain at each temperature and pressure. Shortening cycles were followed by lengthening back to 0% strain. Quantitative texture information was obtained using in-situ synchrotron X-ray diffraction and the Rietveld method to analyze images. In all cases we find that (010) lattice planes align perpendicular to the compression direction upon shortening, and that there is little change in texture with temperature or pressure. This texture pattern is consistent with slip on (010)[100]. The texture observed here is different from that produced in room temperature diamond anvil cell (DAC) experiments on MgGeO{sub 3} and MgSiO{sub 3} pPv which both display textures of (100) and {l_brace}110{r_brace} lattice planes at high angles to the compression direction. This implies that CaIrO{sub 3} pPv may not be a good analog for the plastic behavior of MgSiO{sub 3} pPv.