Engineering topics

Dunham, Scott T.

Publications and source records attributed to Dunham, Scott T..

8 records

DOE OSTI2024

CIGS Technology Advancement via Fundamental Modeling of Defect/Impurity Interactions (Final Technical Report)

The primary goals of the proposed work were to provide modeling tools (and the associated insight which comes along with model development) for design and optimization of CuIn x Ga 1-x Se 2 (CIGS) and CdSeTe (CST) solar cell manufacturing processes and to establish the foundation for comprehensive end-to-end predictive modeling tools to enable optimization of thin film photovoltaic technology for performance, cost, yield, and reliability. The initial focus of efforts within this project was to develop coupled process/optical/device models for CIGS PV technology and to work with Siva Power to apply that TCAD (technology computer-aided design) system to improve the efficiency and reduce manufacturing costs for CIGS solar cells. Our approach to that end was to generate an extensive database of DFT calculations and to use those calculations via statistical thermodynamics methods and Monte Carlo simulation to develop and characterize models for the behavior of native defects as well as intentional and unintentional impurities, including the redistribution of the primary components of CIGS films. Increased effort went toward coupling those models for defect behavior and composition evolution to the performance of multicrystalline CIGS solar cells via prediction of doping level and recombination lifetime as function of manufacturing process. In the second budget period, the project pivoted to developing a similar system for the CdSeTe system, focused especially on understanding the role of Se/Te alloy concentration. Execution of the project resulted in the successful development of TCAD systems for both CIGS and CdSeTe thin film PV within the Synopsys Sentaurus framework by utilizing the Alagator interface. In the first budget period of the project, we developed quantitative models for the major components of CIGS PV and implemented them within a framework that couples process, optical, and device simulation. From the insights we have gained, we identified novel opportunities for enhancing CIGS solar cell performance and have laid the groundwork to further optimize the layer structure, composition profile, and thermal cycles for substantially improved efficiency and lower manufacturing costs. For the CIGS system, process changes to achieve greater than 1% absolute enhancement in efficiency were identified, but testing of those approaches was stymied by lack of a domestic CIGS manufacturing partner after the closure of Siva Power as well as Miasole. For CdSeTe, a fully capable TCAD system only became ready to apply near the end of the project period, so substantial opportunities remain to apply those models to enhance the leading thin film PV technology.

14 SOLAR ENERGY↗

DOE OSTI2024

Optical tuning of the diamond Fermi level measured by correlated scanning probe microscopy and quantum defect spectroscopy

Quantum technologies based on quantum point defects in crystals require control over the defect charge state. Here we tune the charge state of shallow nitrogen-vacancy and silicon-vacancy centers by locally oxidizing a hydrogenated surface with moderate optical excitation and simultaneous spectral monitoring. The loss of conductivity and change in work function due to oxidation are measured in atmosphere using conductive atomic force microscopy and Kelvin probe force microscopy (KPFM). We correlate these scanning probe measurements with optical spectroscopy of the nitrogen-vacancy and silicon-vacancy centers created via implantation 15–25 nm beneath the diamond surface and annealing. The observed charge state of the defects as a function of optical exposure demonstrates that laser oxidation provides a way to precisely tune the Fermi level over a range of at least 2.00 eV. We also observe a significantly larger oxidation rate for implanted surfaces compared to unimplanted surfaces under ambient conditions. Here, combined with knowledge of the electron affinity of a surface, these results suggest KPFM is a powerful, high-spatial-resolution technique to advance surface Fermi level engineering for charge stabilization of quantum defects.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Coupled Process/Device Modeling and Point Defect Engineering of Cu(In,Ga)Se 2 Solar Cells

Point defects directly impact solar cell device performance by limiting the carrier lifetime. In this work, density functional theory calculations are first used to determine the formation energy and diffusion energy barriers of dominant defects in Cu(In,Ga)Se 2 . Next, continuum reaction–diffusion models are developed to analyze the redistribution of defects during manufacturing processes. We estimate defect capture cross sections using a first-principles-based approach. Here, these cross sections are combined with our calculated defect profiles and trap energy levels to parameterize a Shockley–Read–Hall recombination model, which we implement into a device simulator to predict carrier lifetimes and device performance. In that way, a predictive technology computer aided design model is built to predict and optimize the performance of Cu(In,Ga)Se 2 solar cells.

14 SOLAR ENERGY↗

DOE OSTI2023

Atomistic models of In and Ga diffusion in Cu(In,Ga)Se 2

To improve the performance of Cu(In,Ga)Se 2 thin-film photovoltaic devices, a robust understanding of the dominant diffusion pathways of the alloy species In and Ga is needed. Here, the most probable defect complexes and mechanisms for In and Ga diffusion are identified with the aid of density functional theory. The binding energies and migration barriers for these complexes are calculated in bulk CuInSe 2 and CuGaSe 2 . Analytic models and kinetic lattice Monte Carlo simulations are employed to predict the diffusivity of In and Ga under variations in composition and temperature. Here, we find that a model based on coulombic interactions between group III antisites and vacancies on the Cu-sublattice produces results that match well with experiment.

14 SOLAR ENERGY↗

DOE OSTI2022

Defect Structure in Quantum-Cutting Yb3+-Doped CsPbCl3 Perovskites Probed by X-Ray Absorption and Atomic Pair Distribution Function Analysis

Ytterbium-doping in all-inorganic lead-halide perovskites (CsPb(Cl1-xBrx)3) generates novel properties including quantum cutting and narrow line emission, making these materials attractive spectral down-converters for solar photovoltaics. The relationship between this optical efficiency and the defect structure(s) associated with Yb3+ dopants within perovskites is not well understood. Various charge-neutral doping motifs have previously been proposed and studied computationally, including clusters involving two substitutional Yb3+ ions charge-compensated by a single local Pb2+ vacancy. Near-band-edge defect states associated with such motifs are believed to play an important mechanistic role in quantum cutting itself. Here, we report the results of X-ray absorption and X-ray total-scattering measurements on ytterbium-doped CsPbCl3. XANES shows that the dopant oxidation state is exclusively Yb3+, and a combination of Yb L3 and Pb L3 EXAFS shows that this Yb3+ substitutes exclusively at Pb2+ sites, where it adopts a pseudo-octahedral [YbCl6]3- coordination environment. Shell-by-shell fits to the data show a short Yb-Cl bond distance of 2.58 Å compared to the Pb-Cl bond distance of 2.83 Å. We confirm this finding by X-ray pair distribution function analysis, which also shows evidence of additional Pb2+ vacancy formation induced by Yb3+ doping. We evaluate whether this is the primary mechanism of charge compensation using simulated EXAFS and pair distribution function data for several computed defect structures. Together, these results resolve the local dopant structures and charge-compensation mechanisms in lanthanide-doped all-inorganic lead-halide perovskites, and, as such, significantly advance the understanding of structure-function relationships in this important class of materials.

Kluherz, Kyle (ORCID:0000000279865167)↗

DOE OSTI2022

Reduced photothermal heating in diamonds enriched with H3 point defects

Solid-state laser refrigeration of semiconductors remains an outstanding experimental challenge. In this work, we show that, following excitation with a laser wavelength of 532 nm, bulk diamond crystals doped with H3 centers both emit efficient up-conversion (anti-Stokes) photoluminescence and also show significantly reduced photothermal heating relative to crystals doped with nitrogen–vacancy (NV) centers. The H3 center in diamond is a highly photostable defect that avoids bleaching at high laser irradiances of 10–70 MW/cm 2 and has been shown to exhibit laser action, tunable over the visible band of 500–600 nm. Here, the observed reduction of photothermal heating arises due to a decrease in the concentration of absorbing point defects, including NV-centers. These results encourage future exploration of techniques for H3 enrichment in diamonds under high-pressure, high-temperature conditions for the simultaneous anti-Stokes fluorescence cooling and radiation balanced lasing in semiconductor materials. Reducing photothermal heating in diamond through the formation of H3 centers also opens up new possibilities in quantum sensing via optically detected magnetic resonance spectroscopy at ambient conditions.

42 ENGINEERING↗

DOE OSTI2022

Universal machine learning framework for defect predictions in zinc blende semiconductors

Our article introduces a universal predictive framework for point defect formation energies and charge transition levels in a wide chemical space of zinc blende semiconductors and possible impurity atoms selected from across the periodic table. This framework was developed by leveraging high-throughput quantum mechanical simulations benchmarked using some experimental data from the literature, as well as machine learning (ML)-based regressions techniques that map unique materials descriptors to computed defect properties and yield optimized and generalizable models. Furthermore, the power and utility of these models is revealed through quick predictions for thousands of new defects and screening of low-energy impurities, which may tune the equilibrium conductivity in the semiconductor. This work presents, to our knowledge, the largest density functional theory (DFT) dataset of defect properties in semiconductors and the largest DFT+ML-based screening of point defects in semiconductors to date.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Understanding copper diffusion in CuInSe 2 with first-principles based atomistic and continuum models

We investigate the diffusion of copper in CuInSe 2 using thermodynamic and kinetic models based on density functional theory calculations, attempting to reconcile large differences in reported experimental diffusivities. We find that observations of rapid chemical diffusion can be explained by large thermodynamic factors, which we calculate using a compositionally constrained model of intrinsic point defect formation. We further characterize how copper diffusion coefficients depend on material synthesis conditions and exhibit their variation across the CuInSe 2 secondary phase diagram. In doing so, we identify stable off-stoichiometries that are dominated by either vacancy- or interstitial-mediated diffusion mechanisms. These results are employed in the development of a continuum reaction–diffusion model, which we use to simulate experimental depth profiles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗