Search NASA⌕ Search

Engineering topics

Duran, J. D.

Publications and source records attributed to Duran, J. D..

8 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Modeling turbulent impurity transport in the SOL of DIII-D with a reduced model

A novel impurity transport model that approximates SOL turbulence as a fluctuating poloidal electric field is shown to be an acceptable replacement for the traditional approach of assigning an arbitrary radial diffusion coefficient to the impurity ions. The model is implemented in the DIVIMP impurity transport code and applied to an L-Mode tungsten divertor experiment on DIII-D. The poloidal electric field is represented as fluctuating between ±1000 V m –1 based on previous measurements. The resulting intermittent v r = E θ × B T transport causes ions to transport both into the core as well as into the far-SOL. Simultaneous agreement with estimates of the W density just inside the separatrix as well as in the far-SOL is obtained (n W ~ 10 14 m –3 and n W ~ 10 12 m –3 , respectively). Prompt re-deposition of the W ions was necessary to obtain agreement (f redep ~ 99%). Here, we conclude that simulating impurity transport using a physics-based approximation for turbulence in the SOL, versus arbitrarily assigning diffusion coefficients, may enable better reactor scale predictions of core impurity contamination.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Separatrix-to-Wall Simulations of Impurity Transport with a Fully Three-Dimensional Wall in DIII-D

A novel multi-code workflow to interpret collector probe deposition patterns in DIII-D has been developed. The components of the workflow consist of a detailed computer-aided design (CAD) file of the vessel wall and the scrape-off layer (SOL) codes MAFOT, OSM, DIVIMP and 3DLIM. A special-purpose toolkit enables passing the output of these codes between each other to provide a full-SOL picture of impurity transport. A demonstration of the workflow is described to support evidence of near-SOL tungsten parallel accumulation during trace W impurity experiments on DIII-D. Iteration between simulated deposition patterns in 3DLIM and DIVIMP predicts a region of elevated W density near the separatrix about halfway between the outboard midplane and the top of the plasma. Furthermore, this workflow will be used to better interpret collector probe experiments on DIII-D.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Modeling of ExB effects on tungsten re-deposition and transport in the DIII-D divertor

Mixed-material DIVIMP-WallDYN modelling, now incorporating ExB drifts, is presented that simultaneously reproduces tungsten (W) erosion and deposition patterns observed during the DIII-D Metal Rings Campaign, in which a toroidally symmetric set of W-coated tiles were installed in the carbon (C) DIII-D divertor. Since most reactor plasma facing component (PFC) designs call for mixed-material environments, including ITER’s W/Be enviroment, the divertor targets will quickly evolve into reconstitued surfaces of multiple elements. This work identifies controlling physics that affects material migration patterns in the divertor, which impact PFC lifetimes and impurity leakage from the divertor to the core. These simulations indicate that radial and poloidal ExB transport dominates over parallel force balance for high-Z impurities such as W in the divertor region of DIII-D. It is demonstrated that ExB drifts are required to reproduce the experimental observation of non-local W and C co-accumulation in a band ~7-9 cm outboard of the outer-strike-point (OSP) W source, for attached Lmode conditions in the unfavorable ion grad-B drift direction. In addition, W gross erosion is localized to the region outboard of the OSP, as the formation of C co-deposits suppresses W erosion at the strike point. Time-dependent simulations with scaled ExB impurity drifts (60% of the OEDGE-calculated drift velocity) and W re-erosion quantitatively reproduce these features, including depth-resolved W/C ratios, within a factor of 2 over ~115 seconds of accumulated plasma exposure. The location of co-deposition regions is shown to be well represented by an analytic leakage model, driven largely by poloidal ExB drifts. Qualitative agreement is also found between campaign-integrated W deposition measurements and simulations for the favorable ion grad-B drift direction, the standard mode of operation for most tokamaks. Furthermore, these results imply that a longterm inward radial migration of material from the outer divertor through the private flux region may occur in future devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Observations of wall conditioning by means of boron powder injection in DIII-D H-mode plasmas

In this paper, we report observations from the DIII-D tokamak indicating that boron (B) powder injection in tokamak plasmas improves wall conditions similarly to glow discharge boronization (GDB). Isotopically enriched B powder (B 11 > 95%) was introduced gravitationally in a sequence of H-mode plasma discharges at rates up to ~160 mg s -1 for durations up to 3 s. Boron injection to cumulative amounts ≤0.1 g appeared to improve wall conditions similarly to boronization, with indications of reduced wall fueling, reduced recycling at the outer strike point and reduced impurity content at breakdown. Post-mortem analysis of graphite samples exposed to far scrape-off layer plasma fluxes during boron injection confirm the formation of a B-C layer, with average surface composition B:C ~ 1. The results suggest that injecting boron-rich powders in tokamak plasmas can effectively replenish boron films on carbon plasma facing components to improve wall conditions and extend the duration of the beneficial effects of GDB.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Localized divertor leakage measurements using isotopic tungsten sources during edge-localized mode-y H-mode discharges on DIII-D

Experiments carried out on DIII-D using a novel setup of isotopic tungsten (W) sources in the outer divertor have characterized how the W leakage from this region depends on both the exact source location and edge-localized mode (ELM) behavior. The sources are toroidally-symmetric and poloidally-localized to two regions: (1) the outer strike point (OSP) with natural abundance of W isotopes; and (2) the far-target with highly-enriched 182 W isotopes. With the use of a dual-faced collector probe (CP) in the main scrape-off layer (SOL) near the outside midplane and source-rate spectroscopy, a proxy for divertor impurity leakage is developed herein. Using this proxy, it is found that for the OSP W location, there is a nearly linear increase of leakage with the power across the separatrix ( ), which is consistent with the effect of an increased upstream ion temperature parallel gradient force in the near-SOL; trends in the pedestal density and collisionality are also seen. Conversely, it is found that for the far-target W location leakage falls off rapidly as increases and ELM size decreases, which is suggestive that ELM size plays a role in the leakage from this location. Indications for main SOL W contamination is evidenced by the measurement of large deposition asymmetries on the two opposite CP faces. These measurements are coupled with interpretive modeling showing SOL W accumulation near the separatrix furthest from both targets driven by forces parallel to the magnetic field. This experimental setup, together with the target and upstream W measurements, provides information on the transport from different divertor W source locations and leakage. These studies help to elucidate the physics driving divertor impurity source rates and leakage, with and without ELMs, and provide better insight on the link in the chain connecting wall impurity sources to core impurity levels in magnetic fusion devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗