Search NASA⌕ Search

Engineering topics

Duty, Chad E.

Publications and source records attributed to Duty, Chad E..

At least 19 records

Measuring thermomechanical response of large-format printed polymer composite structures via digital image correlation

Large-format additive manufacturing (LFAM) is a branch of additive manufacturing (AM) research with the ability to create large structures typically measuring several meters in scale. LFAM is advantageous for tooling applications, not only because it offers the ability to create complex geometries not easily made using subtractive manufacturing processes, but the cost savings of pelletized feedstock used by these systems result in larger parts printed at faster speeds than traditional AM systems. Fiber reinforced polymer (FRP) is a commonly used feedstock material in LFAM structures because it reduces the distortion experienced during printing. However, FRP introduces highly anisotropic thermomechanical properties and contributes to a nonhomogeneous microstructure that can result in critical distortion of dimensions during tooling. Measuring the global thermomechanical response of LFAM structures requires a more representative method that accounts for not only anisotropic properties but also the nonhomogeneous nature of the final part. This is where traditional techniques to measure thermomechanical response, such as thermomechanical analysis (TMA), fall short as they assume homogeneity. This study evaluated the coefficient of thermal expansion (CTE) of LFAM structures as measured by TMA as compared to a novel digital image correlation oven (DIC Oven) system. The LFAM structures were made from 20 % by weight carbon fiber reinforced acrylonitrile butadiene styrene (CF-ABS). TMA measurements showed significant variations in CTE across a single LFAM bead, confirming the need for a global technique that captures overall thermomechanical response. The CTE values measured using the DIC Oven compared well to average TMA values obtained from localized measurements across the sample. The DIC Oven was also used to quantify the effects of different layer orientations on thermomechanical properties, which cannot be easily captured using TMA. A predictive model was also developed by using localized TMA values across an LFAM bead to predict the overall thermomechanical response of an LFAM structure.

36 MATERIALS SCIENCE↗

Penetrating and actuating nozzle for extrusion-based 3D printing

An apparatus and device for creating a vertical strengthening feature within a 3D printed article of manufacture for improving mechanical performance in the Z-direction. Fill material is deposited in voids vertically crossing multiple layers during the build of 3D printing. The device includes a penetrating extension that fits within the void to create a vertical strengthening feature via heat and/or extruded fill material. The size and/or movement of the heated extension can impact the void side walls to reflow the build material and blend the layers together within the void side walls.

Kunc, Vlastimil↗

Self-sensing of printed polymer structures

A structural health monitoring method is provided that utilizes self-sensing printed polymer structures. The method is based on resistivity properties of conductive materials, which can be integrated to a 3D printed polymer structure during additive manufacturing. An article to be monitored has at least one 3D printed polymer structure including a circuit comprising at least one conductive pathway extending through a non-conductive material. The resistance across the circuit is measured during or after loading of the article to determine a resistance value. The measured resistance value is compared to a known resistance value, and based on the comparison, a defect can be detected in the 3D printed polymer structure. Structural health monitoring systems and articles with integrated structural health monitoring are also provided.

Kunc, Vlastimil↗

Linking thermoset ink rheology to the stability of 3D-printed structures

Thermoset polymer composites show promise for additive manufacturing (AM) applications to address some of the limitations of the more widely used thermoplastic feedstock materials. Thermosets offer attractive mechanical properties while providing excellent interlayer bonding, high thermal and chemical stability, and reduced energy consumption as a result of deposition at room temperature. However, since thermoset resins rely on a crosslinking reaction to solidify, rather than quickly cooling like thermoplastics, viscoelastic properties must be relied upon to maintain deposited shape after deposition until crosslinking can occur. This fact has not impeded development and characterization of new thermoset feedstocks on the small scale, but recent efforts to increase scale of thermoset printing have highlighted issues with structural stability under self-weight. This study addresses issues of self-weight by investigating the mechanisms that cause collapse of tall, thin printed walls. Using nanoclay- and fumed silica-filled epoxy feedstocks, this work compares the collapse height for printed walls to stability models based on yielding and buckling mechanics. Inputs for these models – shear yield stress and storage modulus – were taken directly from parallel plate rheometry measurements. Model predictions were found to be in good agreement with experimental results, where both yielding and buckling behavior were observed, provided the rheological properties after a shear excursion were used as inputs. This work establishes a direct link between basic rheological properties of the feedstock, geometry of the printed object, and achievable height. Overall, the results presented highlight the importance of understanding recovery behavior in thermoset feedstocks and provide valuable guidance on the development of more effective direct-ink writing feedstock materials.

36 MATERIALS SCIENCE↗

Microbial Approach to Low-Cost Production of Photovoltaic Nanomaterials

Photovoltaic (PV)-generated electricity can participate in renewable grid parity after meeting conditions of low-cost PV materials and economic manufacturing of solar cells. In this paper, we report low-cost, scalable microbial synthesis of Cu(In,Ga)Se 2 (CIGSe) and Cu(In,Ga)S 2 (CIGS), which are among the promising candidates to serve as light absorbing layers in solar panels. Microbial synthesis uses reducible chalcophiles and empirically stoichiometric metal components to produce CIGSe and CIGS with band gaps and intra- and intercrystallite compositional homogeneity similar to that produced with traditional techniques. Importantly, microbially produced photovoltaic materials described herein use inexpensive precursor materials at moderate temperatures (65 °C). The microbially facilitated processes do not utilize high temperature, vacuum, or toxic organic solvents. The potential to upscale microbial synthesis without loss of material quality is demonstrated here, indicating a high potential for industrial applications of this technology for production of nanomaterials for PV applications. We estimate that a 50 000 gallon fermentor could generate about 100 kg/month of CIGSe nanoparticles, which could be processed into 0.2 MW of PV cells.

stoichiometric homogeneity↗

Low shear process for producing polymer composite fibers

A method for producing a polymer composite fiber comprised of a polymer matrix with filaments incorporated therein whose lengthwise dimensions are substantially oriented with the axial dimension of the composite fiber, the method comprising subjecting a melt comprised of a polymer matrix and filaments to an extrusion process in which the melt is extruded into a fibrous form in the absence of screw extruders and in the substantial absence of shear forces that result in breakage of the filaments, followed by cooling and solidification of the extruded melt to provide the polymer composite fiber. Integration of these polymer composite fibers with additive manufacturing technologies, particularly rapid prototyping methods, such as FFF and 3D printing, are also described. The resulting polymer composite fibers and articles made thereof are also described.

36 MATERIALS SCIENCE↗

Rapid non-contact energy transfer for additive manufacturing driven high intensity electromagnetic fields

A method and apparatus for additive manufacturing that includes a nozzle and/or barrel for extruding a plastic material and a supply of polymeric working material provided to the nozzle, wherein the polymeric working material is magnetically susceptible and/or electrically conductive. A magneto-dynamic heater is provided for producing a time varying, high flux, frequency sweeping, alternating magnetic field in the vicinity of the nozzle to penetrate into and couple the working material to heat the material through at least one of an induced transient magnetic domain and an induced, annular current.

42 ENGINEERING↗

Potentials with small-angle neutron scattering technique for understanding structure-property relation of 3D-printed materials: SANS Investigation of 3D-Printed Materials

Carbon fiber (CF)-embedded acrylonitrile butadiene styrene polymer composites printed on the large-scale printer at Oak Ridge National Laboratory were investigated by small-angle neutron scattering to correlate the microstructure of the composites with their mechanical strength. The microstructure of the polymer domains and the alignment of CF were characterized across the interfaces among layers of the hot-melt extruded material and were compared with CF-free ABS. The small-angle neutron scattering data show that the CF-containing material displays strong anisotropic scatterings indicating molecular alignment along the printing direction that is not present in the CF-free ABS. Scattering data analysis across the interfacial layer revealed enhanced molecular alignment along the printing direction near the boundaries and inhomogeneous size distribution of polymer domains upon the addition of CF. We attribute the compromised strength across interfacial layers from CF-containing material to this inhomogeneous size distribution which inhibits effective lateral interaction between layers.

36 MATERIALS SCIENCE↗

A review on the fatigue behavior of Ti-6Al-4V fabricated by electron beam melting additive manufacturing

Electron beam melting (EBM) is a swiftyly-developing metal additive manufacturing process that holds significant interest in the aerospace and biomedical industries for the high-strength titanium alloy, Ti-6Al-4V. These industries have fatigue-limited applications, yet a lack of understanding of the EBM process-microstructure-fatigue relationships limit widespread use and presents challenges for certification. In this review, uniaxial fatigue data was collected and the effects of build orientation, surface roughness, and hot-isostatic pressing are linked to the fatigue properties highlighting microstructure, defects, and failure mechanisms. The observations and conclusions are supported by statistical analysis using the mean fatigue life obtained by the Statistical Fatigue-Limit Model. Both EBM-process and post-process structure relationships are discussed in order to identify the best-practice for fatigue-resistant design. The performance of the EBM material is compared to conventionally manufactured Ti-6Al-4V and possible methods to increase the fatigue resistance are discussed. Anisotropic fatigue behavior was observed in as-fabricated parts and no statistical distinction was found in the fatigue performance of HIPed and as-fabricated material provided the same as-fabricated rough surface condition. However, comparable fatigue life to traditionally manufactured lamellar Ti-6Al-4V is achieved when both post-process HIP and machining are applied to EBM-fabricated parts.

36 MATERIALS SCIENCE↗

What makes a material printable? A viscoelastic model for extrusion-based 3D printing of polymers

This paper presents a practical model for evaluating polymer feedstock materials as candidates for 3D printing across a variety of extrusion-based platforms. In order for a material to be successfully utilized for 3D printing operations, a series of fundamental conditions must be met. First, pressure-driven extrusion must occur through a given diameter nozzle at a specified flow rate. Second, the extruded material must form and sustain the desired shape. Third, the extruded structure must be able to bridge a specified gap and serve as a mechanically sound foundation for successive deposits. Finally, the deposited structure must be dimensionally stable during the transition to the final state (i.e. fully cured at room temperature). This article presents a framework for extrusion-based printing and a simple viscoelastic model for each of these conditions based on the rheological and thermo-physical properties of the candidate material and the processing parameters of the extrusion-based deposition platform. The model is demonstrated to be a useful tool for the evaluation of example test cases including: high temperature thermoplastics (polyphenylsulfone), fiber reinforced thermoplastics (acrylonitrile butadiene styrene), low-viscosity thermosets (epoxy resins), and thermoplastics with a high coefficient of thermal expansion (polypropylene).

36 MATERIALS SCIENCE↗

Controllable reductive method for synthesizing metal-containing particles

The invention is directed to a method for producing metal-containing particles, the method comprising subjecting an aqueous solution comprising a metal salt, E.sub.h, lowering reducing agent, pH adjusting agent, and water to conditions that maintain the E.sub.h value of the solution within the bounds of an E.sub.h-pH stability field corresponding to the composition of the metal-containing particles to be produced, and producing said metal-containing particles in said aqueous solution at a selected E.sub.h value within the bounds of said E.sub.h-pH stability field. The invention is also directed to the resulting metal-containing particles as well as devices in which they are incorporated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Method of microbially producing metal gallate spinel nano-objects, and compositions produced thereby

A method of forming a metal gallate spinel structure that includes mixing a divalent metal-containing salt and a gallium-containing salt in solution with fermentative or thermophilic bacteria. In the process, the bacteria nucleate metal gallate spinel nano-objects from the divalent metal-containing salt and the gallium-containing salt without requiring reduction of a metal in the solution. The metal gallate spinel structures, as well as light-emitting structures in which they are incorporated, are also described.

36 MATERIALS SCIENCE↗

The Development of High Temperature Thermoplastic Composite Materials for Additive Manufactured Autoclave Tooling

In this work, ORNL and Techmer investigated and screened different high temperature thermoplastic reinforced materials to fabricate composite molds for autoclave processes using Additive Manufacturing (AM) techniques. This project directly led to the development and commercial release of two printable, high temperature composite materials available through Techmer PM. These new materials are targeted for high temperature tooling made via large scale additive manufacturing.

36 MATERIALS SCIENCE↗

Reducing mechanical anisotropy in extrusion-based printed parts

The mechanical performance of 3D printed components is highly dependent upon the orientation of the part relative to the build plane. Specifically for extrusion-based printing systems, the bond between successive layers (z-direction) can be 10-25% weaker than in the printed plane (x-y plane). As advanced applications call for fiber reinforced materials and larger print systems (such as the Big Area Additive Manufacturing system) extend the layer time, mechanical performance in the z-direction can decrease by 75-90%. This paper presents a patent-pending approach for improving mechanical performance in the z-direction by depositing material vertically across multiple layers during the build. The “z-pinning” process involves aligning voids across multiple (n) layers, which are then back-filled in a continuous fashion during the deposition of layer (n+1). The “z-pinning” approach has been demonstrated to be an effective approach for increasing the strength (20% increase) and toughness (200% increase) of printed parts in the zdirection.

36 MATERIALS SCIENCE↗

Reactive polymer fused deposition manufacturing

Methods and compositions for additive manufacturing that include reactive or thermosetting polymers, such as urethanes and epoxies. The polymers are melted, partially cross-linked prior to the depositing, deposited to form a component object, solidified, and fully cross-linked. These polymers form networks of chemical bonds that span the deposited layers. Application of a directional electromagnetic field can be applied to aromatic polymers after deposition to align the polymers for improved bonding between the deposited layers.

36 MATERIALS SCIENCE↗

One-Pot Process in Scalable Bath for Water-Dispersed ZnS Nanocrystals with the Tailored Size

Well-dispersed ZnS nanocrystals with tailored size in aqueous solutions were synthesized by employing cysteine-sulfur (Cys-S) complexes with low molecular weight in a scalable anoxic vessel. High yield production of water-dispersed ZnS nanocrystals on a 10-L scale was demonstrated in an aqueous solution process. The average crystallite size of ZnS was controlled by changing the ratio of the cysteine to sulfide in the applied Cys-S complexes. A decrease in the crystallite size of ZnS likely resulted in both the blue shift of peak positions and the relative variation of peak intensities in the photoluminescence properties. In addition, the pH-dependent stability against aggregation of ZnS nanocrystals was investigated to reduce agglomeration.

36 MATERIALS SCIENCE↗

Evaluation of Additive Manufacturing for High Volume Composite Part Molds

ORNL worked with TruDesign, LLC to develop viable coating solutions to enable the use of large scale 3D printing for both low-temperature and high-temperature composite molds. This project resulted in two commercial products and successfully demonstrated the use of printed molds for autoclave processing for the first time.

42 ENGINEERING↗