Engineering topics

Dwyer, Thomas A. W., III

Publications and source records attributed to Dwyer, Thomas A. W., III.

10 records

NASA NTRS1991

Bilinear modeling and state estimation of slew-induced deformations of a flexible multibody system

A model of the nonlinear dynamics of a deformable maneuvering multibody system is described, whereby elastic deformations are modeled by restoring forces and dissipative forces at point mass appendages. This model is brought into bilinear form. Estimation of deformations occasioned by rapid slewing maneuvers is carried out by a filter based on a globally equivalent linear model of the bilinear dynamics, and is shown to be an improvement over the extended Kalman filter. To further alleviate the computational burden, the estimated deformation state is propagated between observations by a low dimensional operator spline interpolator of bilinear system Volterra series, which is easily implemented.

Dwyer, Thomas A. W., III↗

NASA NTRS1990

Application of the operator spline technique to nonlinear estimation and control of moving elastic systems

A bilinear model of the vibrational dynamics of a deformable maneuvering body is described. Estimates of the deformation state are generated through a low dimensional operator spline interpolator of bilinear systems combined with a feedback linearized based observer. Upper bounds on error estimates are also generated through the operator spline, and potential application to shaping control purposes is highlighted.

Karray, Fakhreddine↗

NASA NTRS1989

Sliding control of pointing and tracking with operator spline estimation

It is shown how a variable structure control technique could be implemented to achieve precise pointing and good tracking of a deformable structure subject to fast slewing maneuvers. The correction torque that has to be applied to the structure is based on estimates of upper bounds on the model errors. For a rapid rotation of the deformable structure, the elastic response can be modeled by oscillators driven by angular acceleration, and where stiffness and damping coefficients are also angular velocity and acceleration dependent. By transforming this slew-driven elastic dynamics into bilinear form (be regarding the vector made up of the angular velocity, squared angular velocity and angular acceleration components, which appear in the coefficients as the input to the deformation dynamics), an operator spline can be constructed, that gives a low order estimate of the induced disturbance. Moreover, a worst case error bound between the estimated deformation and the unknown exact deformation is also generated, which can be used where required in the sliding control correction.

Dwyer, Thomas A. W., III↗

NASA NTRS1989

Bilinear modeling and nonlinear estimation

New methods are illustrated for online nonlinear estimation applied to the lateral deflection of an elastic beam on board measurements of angular rates and angular accelerations. The development of the filter equations, together with practical issues of their numerical solution as developed from global linearization by nonlinear output injection are contrasted with the usual method of the extended Kalman filter (EKF). It is shown how nonlinear estimation due to gyroscopic coupling can be implemented as an adaptive covariance filter using off-the-shelf Kalman filter algorithms. The effect of the global linearization by nonlinear output injection is to introduce a change of coordinates in which only the process noise covariance is to be updated in online implementation. This is in contrast to the computational approach which arises in EKF methods arising by local linearization with respect to the current conditional mean. Processing refinements for nonlinear estimation based on optimal, nonlinear interpolation between observations are also highlighted. In these methods the extrapolation of the process dynamics between measurement updates is obtained by replacing a transition matrix with an operator spline that is optimized off-line from responses to selected test inputs.

Dwyer, Thomas A. W., III↗

NASA NTRS1989

Bandwidth-limited robust nonlinear sliding control of pointing and tracking maneuvers

It is shown how multiaxial spacecraft tracking and pointing maneuvers with known control bandwidth and given tracking error bounds can be implemented by variable-structure control in the presence of uncertain vehicle and target dynamics. It is shown how to select a nonlinear sliding surface relating attitude and rate variables, as well as a Lyapunov function in the surface variables that absorbs multiplicative model undertainties, thereby simplifying the computation of control corrections. It is then shown how a boundary layer envelope can be designed, within which the components of the surface error dynamics can be modeled as the outputs of designer-selected decoupled low-pass filters. Closed-loop stability conditions accounting for the coupling between the attitude error dynamics and the surface error dynamics are then obtained.

Dwyer, Thomas A. W., III↗

NASA NTRS1988

Variable-structure control of spacecraft attitude maneuvers

A variable-structure control approach is presented for multiaxial spacecraft attitude maneuvers. Nonlinear sliding surfaces are proposed that result in asymptotically stable, ideal linear decoupled sliding motions of Cayley-Rodrigues attitude parameters, as well as of angular velocities. The resulting control laws are interpreted as more easily implemented and more robust versions of those previously obtained by feedback linearization.

Dwyer, Thomas A. W., III↗

NASA NTRS1987

Variable structure controller design for spacecraft nutation damping

Variable structure systems theory is used to design an automatic controller for active nutation damping in momentum biased stabilized spacecraft. Robust feedback stabilization of roll and yaw angular dynamics is achieved with prescribed qualitative characteristics which are totally independent of the spacecraft defining parameters.

Sira-Ramirez, Hebertt↗

NASA NTRS1987

Tracking and pointing maneuvers with slew-excited deformation shaping

It is shown in this paper how it is possible to shape the slew-excited structural response of a deformable vehicle undergoing agile attitude maneuvers, so that the required fully corrected slew torque profiles can be computed on-line in closed form, and with the same bandwidth as required for the rigid body case. This is accomplished by simultaneously applying maneuver-dependent structural force controls of progressively smaller amplitudes, at the cost of progressively higher signal processing complexity of slew torque and structural force command generation.

Dwyer, Thomas A. W., III↗

NASA NTRS1987

Sliding regimes on slow manifolds of systems with fast actuators

In this article the slow manifold of a system with actuator parasitics is used as a sliding surface on which a Variable Structure Controller recovers the qualitative properties of the reduced order, closed loop system obtained from an ideal actuator-based feedback controller design. Illustrative examples are presented, where (1) the simplicity of reduced order singular perturbation design methods; and (2) the robustness of Variable Structure sliding modes, are advantageously combined.

Sira-Ramirez, Hebertt↗

NASA NTRS1987

Automatically reconfigurable control for rapid retargeting of flexible pointing systems

A reconfigurable nonlinear control system design methodology is proposed to automatically correct computed slew torque commands of space-based pointing systems for the effects of slew-induced structural deformations. The possibility of forcing an elastic structure, such as that of a space-based instrument frame, to deform in a preselected way in response to rapid slews is demonstrated. To accomplish this, a supervisory controller must select a pair of algorithms, one for structural counterexcitation and the other for slew torque correction. It is shown how the reachability and subsequent tracking of the appropriate 'slow manifold', where the control algorithms are valid, can be ensured by a fast tracking loop, with time-varying gain dependent only on the commanded angular acceleration.

Dwyer, Thomas A. W., III↗