Search NASA⌕ Search

Engineering topics

Dzwiniel, Trevor L.

Publications and source records attributed to Dzwiniel, Trevor L..

At least 19 records

Sequential Recovery of Critical Metals from Leached Liquor of Processed Spent Lithium-Ion Batteries

The processing and extraction of critical metals from black mass is important to battery recycling. Separation and recovery of critical metals (Co, Ni, Li, and Mn) from other metal impurities must yield purified metal salts, while avoiding substantial losses of critical metals. Solvent extraction in batch experiments were conducted using mixed metal sulphates obtained from the leach liquor obtained from spent and shredded lithium-ion batteries. Selective extraction of Mn 2+ , Fe 3+ , Al 3+ and Cu 2+ from simulated and real leached mixed metals solution was carried out using di-2-ethylhexylphophoric acid (D2EPHA) and Cyanex-272 at varying pH. Further experiments with the preferred extractant (D2EPHA) were performed under different conditions: changing the concentration of extractant, organic to aqueous ratio, and varying the diluents. At optimum conditions (40% v/v D2EPHA in kerosene, pH 2.5, O:A = 1:1, 25 °C, and 20 min), 85% Mn 2+ , 98% Al 3+ , 100% Fe 3+ , and 43% Cu 2+ were extracted with losses of only trace amounts (<5.0%) of Co 2+ , Ni 2+ , and Li + . The order of extraction efficiency for the diluents was found to be kerosene > Exxal-10 >>> dichloromethane (CH 2 Cl 2 ) > toluene. Four stages of stripping of metals loaded on D2EPHA were performed as co-extracted metal impurities were selectively stripped, and a purified MnSO 4 solution was produced. Spent extractant was regenerated after Fe 3+ and Al 3+ were completely stripped using 1.0 M oxalic acid (C 2 H 2 O 4 ).

25 ENERGY STORAGE↗

Continuous method for preparing carbonate esters

In one embodiment, a continuous process for preparing organic carbonate solvent of Formula (I) as described herein comprises contacting a first reactant (an alcohol) with a reactive carbonyl source (carbonyldiimidazole (CDI) or an alkylchloroformate) in the presence of a catalyst in reaction stream flowing through a continuous flow reactor at temperature 20° C. to about 160° C. and at a flow rate providing a residence time in the range of about 0.1 minute to about 24 hours; collecting a reactor effluent exiting from the continuous flow reactor; recovering a crude product from the reactor effluent; and distilling the crude product to obtain the organic carbonate compound of Formula (I). In another embodiment, the first reactant is an epoxide and the carbonyl source is carbon dioxide.

Dzwiniel, Trevor L.↗

Borate salts, polymers and composites

Described herein are borate salts useful as additives, binders, and electrolyte salts for solid state lithium ion batteries. In particular, the borate salts of Formula (I), Formula (II) and Formula (III) as described herein: can be polymerized, or can be bound to an existing polymer, to provide polymeric binders for ceramic solid state electrolytes that are themselves capable of ion transport independent of the ceramic.

Liao, Chen↗

Design of a Single-Ion Conducting Polymer Electrolyte for Sodium-Ion Batteries

Here, a sodium bis(fluoroallyl)malonato borate salt (NaBFMB) is synthesized. Using a Click thiol-ene reaction, NaBFMB can be photo-crosslinked with a tri-thiol (trimethylolpropane tris(3-mercapto propionate), TMPT) to create a single-ion conducting electrolyte (NaSIE), with all negative charges residing on the borate moieties and anions immobilized through the 3-D crosslinked network. The NaSIE can be prepared either as a free-standing film or through a drop-cast method followed by a photo crosslinking method for an in-situ formation on top of the electrodes. The free-standing film of NaSIE has a high ionic conductivity of 2 × 10 –3 S cm –1 at 30 °C, and a high transference number (t Na + ) of 0.91 as measured through the Bruce-Vincent method. The electrochemical stability of NaSIE polymer electrolyte is demonstrated via cyclic voltammetry (CV) to be stable up to 5 V vs Na/Na + . When tested inside a symmetrical Na//Na cell, the NaSIE shows a critical current density (CCD) of 0.4 mA cm –2 . The stability of NaSIE is further demonstrated via a long cycling of the stripping/plating test with a current density of 0.1 mA cm –2 at five-minute intervals for over 10,000 min. Using the in-situ method, NaSIE is used as the electrolyte for a sodium metal battery using P2 (Na resides at prismatic sites with with ABBAAB stacking)-cathode of Na 0.67 Ni 0.33 Mn 0.67 O 2 (NNMO) and is cycled between the cut-off voltages of 2.0–4.0 V. A high initial specific capacity (85.7 mAh g –1 ) with a capacity retention of 86.79% after 150 cycles is obtained.

25 ENERGY STORAGE↗

Continuous method for preparing carbonate esters

In one embodiment, a continuous process for preparing organic carbonate solvent of Formula (I) as described herein comprises contacting a first reactant (an alcohol) with a reactive carbonyl source (carbonyldiimidazole (CDI) or an alkylchloroformate) in the presence of a catalyst in reaction stream flowing through a continuous flow reactor at temperature 20° C. to about 160° C. and at a flow rate providing a residence time in the range of about 0.1 minute to about 24 hours; collecting a reactor effluent exiting from the continuous flow reactor; recovering a crude product from the reactor effluent; and distilling the crude product to obtain the organic carbonate compound of Formula (I). In another embodiment, the first reactant is an epoxide and the carbonyl source is carbon dioxide.

Dzwiniel, Trevor L.↗

Design of High-Voltage Stable Hybrid Electrolyte with an Ultrahigh Li Transference Number

Considering the high energy consumption during processing, and the low compliance and adhesion of ceramic electrolytes, the integration of polymer into ceramic electrolytes provides a way to mitigate the interfacial issues. However, the severe ion concentration gradient, low ionic conductivity, and instability toward Li metal and high-voltage cathodes become the major concerns in applying hybrid electrolytes. In this work, we report a single-ionconducting hybrid electrolyte (SIE-LLZO) with 64 wt % Li 7 La 3 Zr 2 O 12 (LLZO) particles embedded in a fluoroboron-centered Li-conductive polymer framework (LiBFSIE). The SIE-LLZO electrolyte exhibited a high Li transference number of 0.94 and electrochemical stability up to 5.6 V vs Li/Li + . Promising averaged Coulombic efficiencies of 99.97% and 99.91% were achieved in cells with LiNi 0.8 Co 0.15 Al 0.05 O 2 and LiNi 0.6 Mn 0.2 Co 0.2 O2 cathodes for 400 and 200 cycles, respectively. Finally, the Li-conducting pathway in the hybrid electrolyte was further investigated by a 6 Li-to- 7 Li isotope replacement method, indicating that Li transport mainly relies on the LLZO and interface between LiBFSIE and LLZO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Engineering to Enable High-Voltage Lithium-Ion Battery: From Propylene Carbonate to Trifluoropropylene Carbonate

Molecular engineering of electrolyte structures has led to the successful application of trifluoropropylene carbonate (TFPC), a fluorinated derivative of propylene carbonate (PC), in next-generation high-voltage high-energy lithium-ion cell. Additionally, in contrast to a PC-based electrolyte which cointercalates in the form of Li + -solvated species into the graphene layer and exfoliates a graphite anode, a TFPC-based electrolyte is highly compatible with a graphite anode at low potential. Additionally, it shows exceptional oxidation stability on the charged cathode surface owing to the presence of the -CF 3 group. An all-fluorinated electrolyte, that is, 1.0 M LiPF 6 TFPC/2,2,2-trifluoroethyl carbonate (FEMC) (1/1 volume ratio) + FEC additive, was formulated and demonstrated excellent cycling stability in a high-voltage LiNi 0.5 Mn 0.3 Co 0.2 O 2 /graphite cell cycled between 3.0 and 4.6 V.

25 ENERGY STORAGE↗

Salts for multivalent ion batteries

Methods for preparing electrolyte salts for alkaline earth metal-ion batteries (e.g., calcium and magnesium ion batteries) are described. The electrolyte salts comprise alkaline earth metal (e.g., Mg or Ca) salts of 3,4-dicyano-2-trifluoromethylimidazole (TDI). The methods comprise contacting TDI with an alkaline earth metal bis(trifluoroacetate) salt in trifluoroacetic acid.

25 ENERGY STORAGE↗

A fluorine-substituted pyrrolidinium-based ionic liquid for high-voltage Li-ion batteries

A fluorine-substituted ionic liquid based on a pyrrolidinium cation and a bis(fluorosulfonyl)imide anion was synthesized using a facile one-step reaction. Here, the resulting ionic liquid is highly pure and when dissolved with LiFSI, the IL-based electrolyte showed good compatibility both in Li and graphite anodes, and superior voltage stability is demonstrated in a LiNi 0.5 Mn 0.3 Co 0.2 O 2 cell.

25 ENERGY STORAGE↗

Molecular Design of a Highly Stable Single-Ion Conducting Polymer Gel Electrolyte

Single-ion conducting (SIC) polymer electrolytes with a high Li transference number ( t Li + ) have shown the capability to enable enhanced battery performance and safety by avoiding liquid–electrolyte leakage and suppressing Li dendrite formation. However, issues of insufficient ionic conductivity, low electrochemical stability, and poor polymer/electrode interfacial contact have greatly hindered their commercial use. In this work, a Li-containing boron-centered fluorinated SIC polymer gel electrolyte (LiBFSIE) was rationally designed to achieve a high t Li + and high electrochemical stability. Owing to the low dissociation energy of the boron-centered anion and Li + , the as-prepared LiBFSIE exhibited an ionic conductivity of 2 × 10 –4 S/cm at 35 °C, which is exclusively contributed by Li ions owing to a high t Li + of 0.93. Both simulation and experimental approaches were applied to investigate the ion diffusion and concentration gradient in the LiBFSIE and non-cross-linked dual-ion systems. Typical rectangular Li stripping/plating voltage profiles demonstrated the uniform Li deposition assisted by LiBFSIE. The interfacial contact and electrolyte infiltration were further optimized with an in situ UV–vis-initiated polymerization method together with the electrode materials. By virtue of the high electrochemical stability of LiBFSIE, the cells achieved a promising average Coulombic efficiency of 99.95% over 200 cycles, which is higher than that of liquid–electrolyte-based cells. No obvious capacity fading was observed, indicating the long-term stability of LiBFSIE for lithium metal batteries.

36 MATERIALS SCIENCE↗

Systems and methods for PTNI nanocages

A method for synthesis of PtNi nanocages by synthesizing Pt1Ni6 nanoparticles and acid leaching to form PtNi nanocages. The acid leaching removes nickel selectively from the core of the nanoparticle.

36 MATERIALS SCIENCE↗

Stabilized Electrode/Electrolyte Interphase by a Saturated Ionic Liquid Electrolyte for High-Voltage NMC532/Si-Graphite Cells

Nonaqueous electrolyte has become one of the technical barriers in enabling Li-ion battery comprising of a high voltage cathode and high capacity anode. Here, we demonstrate a saturated piperidinum bis(fluorosulfonyl)imide ionic liquid (IL) with a LiFSI salt not only supports the redox reaction on the cathode at high voltages, but also shows exceptional kinetic stability on the lithiated anode as evidenced by its improved cycling performance in a NMC532/Si-graphite full cells cycled between 4.6 and 3.0 V. On the basis of the spectroscopic/microscopic analysis and molecular dynamics (MD) simulations, the superior performance of the cells is attributed to the formation of solid-electrolyte-interphase on both electrode as well as unique solvation structure where a deadlocked coordination network is established at the saturated state, which prevents transition metal dissolution into the electrolyte via a solvation process.

25 ENERGY STORAGE↗

Solvent for non-aqueous battery

A solvent useful for lithium batteries comprises a compound of Formula (I): (R1)(R2)(R3)Si—R4—O—C(O)—[(O—R5)n—(O—C(O)]m—O—R6—X1. Each of R1 and R2 independently is alkyl; R3 is alkyl, —X2—Si(R7)(R8)(R9), or —CH2—O—C(O)—O—R10; X1 is H or —Si(R11)(R12)(R13); each of R4 and R6 independently is alkylene; each R5 independently is C2 to C6 alkylene; each of R7, R8, R9, and R10 independently is alkyl; X2 is O or alkylene; each of R11 and R12 independently is alkyl; R13 is alkyl or —X3—Si(R14)(R15)(R16); each of R14, R15, and R16 independently is alkyl; X3 is O or alkylene; m is 0 or 1, and n is 1-3; and when m is 0 and R3 is alkyl, X1 is —Si(R11)(R12)(R13). Also described is a method for manufacturing a compound of Formula (II): (R17)(R18)(R19)Si—CH2—O—C(O)—O—R20 where each R17, R18, R19, and R20 is alkyl.

25 ENERGY STORAGE↗

Method for preparing bis-(silylalkyl)carbonate esters

Carbonate esters of Formula (I): (R1)(R2)(R3)Si—R4—O—C(═O)—O—R4—Si(R1)(R2)(R3) are prepared by reaction of a silyl-substituted alcohol of Formula (II): (R1)(R2)(R3)Si—R4—OH with an activated carbonyl compound of Formula (III): C(═O)Z2 in the presence of a catalyst (e.g., an bicyclic amidine, a bicyclic guanidine, or a phosphazene) in an aprotic solvent. In Formulas (I) and (II) each of R1 and R2 independently is alkyl; R3 is alkyl or —X1—Si(R5)(R6)(R7); X1 is O or alkylene; R4 is alkylene; and each R5, R6, and R7 independently is alkyl. In Formula (III), Z is 1-N-imidazolyl or 1-N-succinimidyl. In some embodiments, the catalyst used in the methods described herein comprises at least one base selected from the group consisting of a bicyclic amidine and a bicyclic guanidine. The reaction proceeds readily under both bulk and continuous flow reactor conditions.

25 ENERGY STORAGE↗