Search NASA⌕ Search

Engineering topics

Ebel, D S

Publications and source records attributed to Ebel, D S.

Three Dimensional Petrography of Kernouve: A Story of Vein Formation, Compaction, and Metamorphism

Metallic veins in ordinary chondrites, like those found in Kernouve (H5, S1), have been attributed to impact or shock processes on the parent body. However, Kernouve is widely known to exhibit few traditional signs of shock loading and has a very old {sup 39}Ar-{sup 40}Ar age (4.46 Ga), making the significance of vein formation in Kernouve unclear. One possibility is early vein formation followed by partial obliteration due to thermal metamorphism. We examine this scenario here. The metal vein in Kernouve can be explained as a pre-metamorphic shock-induced structure, given the evidence for current weak compaction and low shock stage. However, it is not clear how one explains high porosity and low shock stage if the meteorite experienced early shock sufficiently strong to mobilize metal into a vein-like structure. Some combination of unusual conditions during shock (e.g. high temperatures) or mobility of metal during metamorphism may be needed. One possible mechanism occurring early on the H chondrite parent body follows: blocks of slightly indurated but porous material were disturbed by an impact which caused a physical concentration of metallic phases akin to slickensides. Shearing of these materials caused the warm, ductile metal grains to be concentrated on rock surfaces. This process would have imparted the rocks with indicators cited by as shock induced. This event happened early in the history of the chondrite otherwise shearing forces would have imparted a preferred orientation upon the metal grains. Subsequent annealing due to radiogenic heating erased any preferential orientation and further coalesced the vein metal. The final compaction of the material occurred yielding the porosity seen in the samples today. The material escaped other major shock episodes.

79 ASTRONOMY AND ASTROPHYSICS↗

3D Fluorescent and Reflective Imaging of Whole Stardust Tracks in Aerogel

The NASA Stardust mission returned to earth in 2006 with the cometary collector having captured over 1,000 particles in an aerogel medium at a relative velocity of 6.1 km/s. Particles captured in aerogel were heated, disaggregated and dispersed along 'tracks' or cavities in aerogel, singular tracks representing a history of one capture event. It has been our focus to chemically and morphologically characterize whole tracks in 3-dimensions, utilizing solely non-destructive methods. To this end, we have used a variety of methods: 3D Laser Scanning Confocal Microscopy (LSCM), synchrotron X-ray fluorescence (SXRF), and synchrotron X-ray diffraction (SXRD). In the past months we have developed two new techniques to aid in data collection. (1) We have received a new confocal microscope which has enabled autofluorescent and spectral imaging of aerogel samples. (2) We have developed a stereo-SXRF technique to chemically identify large grains in SXRF maps in 3-space. The addition of both of these methods to our analytic abilities provides a greater understanding of the mechanisms and results of track formation.

79 ASTRONOMY AND ASTROPHYSICS↗

Renewed Search for FUN (Fractionated and Unidentified Nuclear Effects) in Primitive Chondrites

Ca-Al-rich inclusions (CAIs) found in primitive chondrites record processes and conditions of the earliest solar system as they are the oldest known solid objects formed in the solar system [1,2]. CAIs with fractionation and unidentified nuclear anomalies (FUN CAIs; [3]) are very rare and thusfar found exclusively in CV carbonaceous chondrites (e.g., Allende and Vigarano)[4]. FUN CAIs are characterized by large nucleosynthetic anomalies in several elements (Ca, Ti, Si, Sr, Ba, Nd, and Sm), large mass-dependant isotope fractionation (Mg, Si, and O), and very little initial {sup 26}Al [4,5 and reference therein]. Formation of FUN CAIs by thermal processing of presolar dust aggregates prior to the injection of {sup 26}Al into the protoplanetary disk has been proposed. More recently [5] proposed that FUN CAIs formed from a protosolar molecular cloud after injection of {sup 26}Al but before {sup 26}Al and {sup 27}Al were completely homogenized. Therefore discovering more FUN CAIs to perform U-Pb and other short-lived chronometric dating will provide key constraints on the age of the solar system, the isotopic composition of the protosolar molecular cloud, the earliest stages of the thermal processing in the solar system and the timing of {sup 26}Al and other short-lived radionuclide injection into the nascent solar system. Most known FUN CAIs were discovered and studied > 30 yr ago, and their isotope ratios determined using thermal ionization mass spectrometry (TIMS). Most of these FUN CAIs were almost or entirely consumed during their respective analyses. [5] recently identified a new FUN CAI (NWA 779 KS-1) based on O and Mg isotope ratios determined by SIMS and MCICPMS, respectively. We have initiated a systematic search for FUN CAIs in primitive chondrites, taking advantage of the large mass-dependant Mg isotope effects known for FUN inclusions with little or no inferred {sup 26}Al. Our strategy is to use newly developed sample cells capable of holding very large slabs of meteorites for laser ablation interfaced with a multicollector inductively coupled plasma mass spectrometry (LA-MC-ICPMS) at UC Davis. Here report the initial findings of our search and describe the instrument setup we use that provides rapid throughput and accurate results.

79 ASTRONOMY AND ASTROPHYSICS↗

Incompletely compacted equilibrated ordinary chondrites

We document the size distributions and locations of voids present within five highly porous equilibrated ordinary chondrites using high-resolution synchrotron X-ray microtomography ({mu}CT) and helium pycnometry. We found total porosities ranging from {approx}10 to 20% within these chondrites, and with {mu}CT we show that up to 64% of the void space is located within intergranular voids within the rock. Given the low (S1-S2) shock stages of the samples and the large voids between mineral grains, we conclude that these samples experienced unusually low amounts of compaction and shock loading throughout their entire post accretionary history. With Fe metal and FeS metal abundances and grain size distributions, we show that these chondrites formed naturally with greater than average porosities prior to parent body metamorphism. These materials were not 'fluffed' on their parent body by impact-related regolith gardening or events caused by seismic vibrations. Samples of all three chemical types of ordinary chondrites (LL, L, H) are represented in this study and we conclude that incomplete compaction is common within the asteroid belt.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Shape, metal abundance, chemistry, and origin of chondrules in the Renazzo (CR) chondrite

We used synchrotron X-ray microtomography to image in 3-dimensions (3D) eight whole chondrules in a {approx}1 cm{sup 3} piece of the Renazzo (CR) chondrite at {approx}17 {micro}m per volume element (voxel) edge. We report the first volumetric (3D) measurement of metal/silicate ratios in chondrules and quantify indices of chondrule sphericity. Volumetric metal abundances in whole chondrules range from 1 to 37 volume % in 8 measured chondrules and by inspection in tomography data. We show that metal abundances and metal grain locations in individual chondrules cannot be reliably obtained from single random 2D sections. Samples were physically cut to intersect representative chondrules multiple times and to verify 3D data. Detailed 2D chemical analysis combined with 3D data yield highly variable whole-chondrule Mg/Si ratios with a supra-chondritic mean value, yet the chemically diverse, independently formed chondrules are mutually complementary in preserving chondritic (solar) Fe/Si ratios in the aggregate CR chondrite. These results are consistent with localized chondrule formation and rapid accretion resulting in chondrule + matrix aggregates (meteorite parent bodies) that preserve the bulk chondritic composition of source regions.

43 PARTICLE ACCELERATORS↗

Nondestructive 3D confocal laser imaging with deconvolution of seven whole stardust tracks with complementary XRF and quantitative analysis

We present a nondestructive 3D system for analysis of whole Stardust tracks, using a combination of Laser Confocal Scanning Microscopy and synchrotron XRF. 3D deconvolution is used for optical corrections, and results of quantitative analyses of several tracks are presented. The Stardust mission to comet Wild 2 trapped many cometary and ISM particles in aerogel, leaving behind 'tracks' of melted silica aerogel on both sides of the collector. Collected particles and their tracks range in size from submicron to millimeter scale. Interstellar dust collected on the obverse of the aerogel collector is thought to have an average track length of {approx}15 {micro}m. It has been our goal to perform a total non-destructive 3D textural and XRF chemical analysis on both types of tracks. To that end, we use a combination of Laser Confocal Scanning Microscopy (LCSM) and X Ray Florescence (XRF) spectrometry. Utilized properly, the combination of 3D optical data and chemical data provides total nondestructive characterization of full tracks, prior to flattening or other destructive analysis methods. Our LCSM techniques allow imaging at 0.075 {micro}m/pixel, without the use of oil-based lenses. A full textural analysis on track No.82 is presented here as well as analysis of 6 additional tracks contained within 3 keystones (No.128, No.129 and No.140). We present a method of removing the axial distortion inherent in LCSM images, by means of a computational 3D Deconvolution algorithm, and present some preliminary experiments with computed point spread functions. The combination of 3D LCSM data and XRF data provides invaluable information, while preserving the integrity of the samples for further analysis. It is imperative that these samples, the first extraterrestrial solids returned since the Apollo era, be fully mapped nondestructively in 3D, to preserve the maximum amount of information prior to other, destructive analysis.

43 PARTICLE ACCELERATORS↗

Physical propoerties of incompletely compacted equilibrated ordinary chondrites: Implications for asteroidal structure and impact processing

Aside from robotic exploration, meteorites are our primary source of information about the asteroids that they sample. Although there are some discrepancies, there are dynamical, spectral, and compositional evidence for an S-type asteroid connection to the ordinary chondrite meteorites. Reconciling the measured bulk density of chondrites with that of asteroids can yield important inferences about the internal structure of asteroids. For example, the bulk density of S-type asteroids is typically much less than the bulk density of chondrites, leading to the inference that asteroids contain a significant quantity of macroporosity. We have identified several unusual ordinary chondrites that have been incompletely compacted relative to petrologically similar but much less porous chondrites. Although these are equilibrated chondrites, they have extreme amounts of pore spaces between mineral grains. Here, we detail our efforts quantifying the nature of the pore spaces in these chondrites and we examine the implications for the structure and mechanical processing of the asteroids from which these chondrites originate. Our pore size distribution data may also provide constraints for the modeling of heat flow and shock waves within primordial chondritic parent bodies.

79 ASTRONOMY AND ASTROPHYSICS↗

Three-dimensional petrography of metal phases in equilibrated L chondrites: Effects of shock loading and dynamic compaction

To examine the role of impacts in the evolution of asteroids as seen through their chondritic offspring, we have performed a quantitative three dimensional (3D) study of metal grains in a suite of increasingly shocked L chondrites with synchrotron X-ray microtomography (XMT). Our data allow rigorous quantification of size-number distributions and collective morphology of Fe(Ni) metal phases in chondritic meteorites. At the resolution of our XMT measurements (8.4--17.9 {mu}m/voxel), the number of metal particles increase with higher degrees of petrographically identified shock loading, indicating a coalescing of Fe-Ni metal at or below this scale. Our results demonstrate that collective degrees of metal grain preferred orientation increase with greater degrees of impact-related compaction and shock loading. Ductile metal grains in L chondrites begin to show foliation at peak shock pressures < 5 GPa, pressures great enough to compact and indurate loosely bound chondritic material, and our results constitute evidence for multiple generations of impact events acting on the L parent body or bodies.

99 GENERAL AND MISCELLANEOUS↗

Pore size distribution in an uncompacted equilibrated ordinary chondrite

The extraordinarily uncompacted nature of the ordinary L chondrite fall Baszkowka gives a unique opportunity to investigate the potentially pre-compaction pore size distribution in an equilibrated ordinary chondrite. Using X-ray microtomography and helium pycnometry on two samples of Baszkowka, we have found that on average, two-thirds of the 19.0% porosity resides in inter- and intra-granular voids with volumes between {approx}3 x10{sup 05} and 3 mm{sup 3}. We show the cumulative number density of pore volumes observable by X-ray microtomography obeys a power law distribution function in this equilibrated ordinary chondrite. We foresee these data adding to our understanding of the impact processing of chondrites and their parent asteroids, where porosity and pore size play significant roles in the parameterization of impact events.

58 GEOSCIENCES↗