Demonstration and Design Criteria of Transition-Edge Sensors (TESs) with Noise Equivalent Power Below 10 (exp -19) W/Hz(sup 1/2) for Space-Borne Grating Spectrometers
No abstract available
transition-edge sensor (TES)↗
Engineering topics
Echternach, P. E.
Publications and source records attributed to Echternach, P. E..
Comparing Transition-Edge Sensor Response Times in a Modified Contact Scheme with Different Support Beams
We present measurements of the thermal conductance, G, and effective time constants, tau, of three transition-edge sensors (TESs) populated in arrays operated from 80-87mK with T(sub C) approximately 120mK. Our TES arrays include several variations of thermal architecture enabling determination of the architecture that demonstrates the minimum noise equivalent power (NEP), the lowest tau and the trade-offs among designs. The three TESs we report here have identical Mo/Cu bilayer thermistors and wiring structures, while the thermal architectures are: 1) a TES with straight support beams of 1mm length, 2) a TES with meander support beams of total length 2mm and with 2 phononfilter blocks per beam, and 3) a TES with meander support beams of total length 2mm and with 6 phonon-filter blocks per beam. Our wiring scheme aims to lower the thermistor normal state resistance R(sub N) and increase the sharpness of the transition alpha=dlogR/dlogT at the transition temperature T(sub C). We find an upper limit of given by (25+/-10), and G values of 200fW/K for 1), 15fW/K for 2), and 10fW/K for 3). The value of alpha can be improved by slightly increasing the length of our thermistors.
SAFARI instrument↗