Search NASA⌕ Search

Engineering topics

Edelman, Eric

Publications and source records attributed to Edelman, Eric.

Evaluation of Drilling Performance at The Geysers with Machine Learning Methods Using Geologic Data

A recent well, GDC-36, was drilled in The Geysers Geothermal Field served in a Department of Energy-industry to demonstrate improved drilling performance with polycrystalline diamond compact (PDC) bits. Both PDC and roller cone drill bits were used to drill this well. Key challenges encountered during drilling included lost circulation in the mud-drilled section, and bit damage interfacial severity in the deeper, air-drilled section. The objective of this study is to evaluate the drilling performance in relation to the local geological characteristics using machine learning methods. By applying K-clustering to the sonic log data, we were able to identify areas correlated with measured lost circulation. Also, the boundaries defined by clustering of the mineralogical and lithological data from the mud logs correlate well with interfacial severity during drilling. A random forest model was employed to build correlation between drilling data and rock strength. The confined compressive strength (CCS) of the rock in the training of the machine learning model was inferred from the dipole sonic log. The R-squared of the testing data is 0.78, and the RMSE (Root Mean Squared Error) is 0.06. The trained model was used to forecast rock strength for the section where sonic log data are not available. CCS could also be inferred from mud logs provided the relationship between mineralogy and rock strength is established through core testing data.

15 GEOTHERMAL ENERGY↗

State 16-2 Well

CT scans, images, and MSCL data to accompany the State 16-2 well

Cane Creek Shale↗

Computed Tomography Scanning and Geophysical Measurements of State 16-2 Well in the Paradox Basin

The computed tomography (CT) facilities and the Multi-Sensor Core Logger (MSCL) at the National Energy Technology Laboratory (NETL) in Morgantown, West Virginia, were used to characterize Paradox Basin core from Grand County, Utah. The primary impetus of this work is a collaboration between the U.S. Department of Energy (DOE), the Utah Geological Survey, the University of Utah, and Zephyr Energy to characterize and make publicly available core information from the Cane Creek interval of the Paradox Basin. This stratigraphic well and the core data produced in this report will aid in understanding the structural complexities of the Cane Creek interval and its production potential.

58 GEOSCIENCES↗

Experimental workflow to estimate model parameters for evaluating long term viscoelastic response of CO2 storage caprocks

Understanding the time-dependent behavior of reservoir and sealing formations is critical to assessing risks associated with geological carbon storage since time-dependent deformation strongly influences mechanical responses of some rock types. Many studies have evaluated the risk of CO2 leakage and induced seismicity by assuming poroelastic rheology in sealing formations. Few have considered viscoelastic or other time-dependent responses, where the existing literature adopts 1D models to represent long-term time-dependent responses. This is primarily because to date, the general form of a reasonable 3D time-dependent model for rocks remains unclear. In this paper, we address this unclear issue by proposing a new workflow to select constitutive modeling parameters to evaluate if a 3D viscoelastic model is reasonable using several-hour-long experimental data and a power-law response to extrapolate to the decades-long time frames of interest in geologic carbon storage. To provide experimental data, we conducted multi-level loading/unloading triaxial relaxation tests with four rock types. The experimental results showed that the maximum load relaxation observed is approximately 49%, with some rock types showing as little as 1.4%. Using a simple linear viscoelastic model, parameters were chosen such that a maximum deviation of 1.5 MPa in axial stress and 7 MPa in radial stress was attained with the extrapolated 30-year data. We found that a reasonable parameter range for the normalized elastic modulus is 0.1~2 for rocks with significant time-dependent responses and 0.01~0.06 for those with small time-dependent responses. No matter how significant time-dependent responses are for rocks considered, our results showed that the relaxation time has a general range of 1~10^10 s, whose time scale can be one or two orders higher than a time frame typically envisioned for CO2 injection projects.

Stress relaxation, 3D time-dependent model, viscoe↗

Experimental Investigation of Time-Dependent Deformation of Fluid Disposal Reservoir Caprocks

For approximately the last two decades low-permeability formations have become a prominent research area because these are the target of unconventional oil shale exploration, and also the primary trapping mechanism for CO2 sequestration and other such subsurface storage. The objective of this research is focused on the sealing ability and induced seismic risk of such tight formations. Disposal of fluid into the subsurface alters the stress state in both the target reservoir and the surrounding formations from their initial in situ state. Therefore, caprocks must be able to deform and accommodate the altered stress and strain state while maintaining the integrity of the seal. The deformation induced in caprock formations often results in a decrease in the normal stress on faults and fractures, which may induce shear slip and therefore create the potential for induced seismicity and leakage. Deformations induced by fluid injection are generally not instantaneous, but typically occur gradually as a pressure front advances through the reservoir and caprock formations. As such, an injection program design can influence both the rate and magnitude of deformation and associated changes in stress. Many common caprock formation types, such as shales and evaporates, are prone to undergo time-dependent deformation such as viscoelastic and/or viscoplastic response. Both the magnitude of the time-dependent deformation and the associated characteristic time scale are important considerations for selecting or operating an injection site. This paper describes tests intended to characterize these effects using caprock samples from a variety of current or potential storage sites. Triaxial and load relaxation test data are presented and used to quantify the time-dependent deformation behavior of rocks with different textures and compositions.

Edelman, Eric↗

EVIDENCE FOR A WEAK WIND FROM THE YOUNG SUN

The early history of the solar wind has remained largely a mystery due to the difficulty of detecting winds around young stars that can serve as analogs for the young Sun. Here we report on the detection of a wind from the 500 Myr old solar analog π{sup 1} UMa (G1.5 V), using spectroscopic observations from the Hubble Space Telescope. We detect H I Lyα absorption from the interaction region between the stellar wind and interstellar medium, i.e., the stellar astrosphere. With the assistance of hydrodynamic models of the π{sup 1} UMa astrosphere, we infer a wind only half as strong as the solar wind for this star. This suggests that the Sun and solar-like stars do not have particularly strong coronal winds in their youth.

79 ASTRONOMY AND ASTROPHYSICS↗

A new detection of LYα absorption from the heliotail

We present new Hubble Space Telescope observations of H I Lyα absorption toward the F8 V star HD 35296. This line of sight is only a few degrees from the downwind direction of the local interstellar medium flow vector. As a consequence, Lyα absorption from the heliotail is detected in the spectrum, consistent with three previous downwind detections of heliotail absorption. The clustering of the heliotail absorption detections around the downwind direction demonstrates that the heliotail is pointed close to that direction, limiting the extent to which the interstellar magnetic field might be distorting and deflecting the heliotail. We explore this issue further using three-dimensional MHD models of the global heliosphere. The three computed models represent the first three-dimensional MHD models with both a kinetic treatment of neutrals and an extended grid in the tail direction, both of which are necessary to model Lyα absorption downwind. The models indicate only modest heliotail asymmetries and deflections, which are not large enough to be inconsistent with the clustering of heliotail absorption detections around the downwind direction. The models are reasonably successful at reproducing the observed absorption, but they do overpredict the Lyα opacity by a factor of 2-3. We discuss implications of these results in light of observations of the heliotail region from the Interstellar Boundary Explorer mission.

79 ASTRONOMY AND ASTROPHYSICS↗