Engineering topics

Edgett, Kenneth S.

Publications and source records attributed to Edgett, Kenneth S..

23 records · Page 2

NASA NTRS1994

Opportunity to sample something different: The dark, unweathered, mafic sands of Cerberus and the Pathfinder 1997 Mars landing

A very important surface component, typically described as 'dark gray material', was not seen at the Viking lander sites, but is common to all low-albedo regions on Mars. Dark material probably includes unaltered mafic volcanic and/or crustal rock and soil not coated by dust, weathering rinds, or varnish. A Pathfinder landing in Cerberus (9 deg N - 16 deg N, 194 deg W - 215 deg W) will guarantee examination of materials that are distinctly different from the two Viking lander sites. In situ study of dark material will provide vital ground truth for orbiter-based observations like those anticipated from Mars '94/'96 and Mars Global Surveyor.

Edgett, Kenneth S.↗

NASA NTRS1993

Hellas Planitia, Mars - Site of net dust erosion and implications for the nature of basin floor deposits

Hellas Planitia, located within an enclosed basin which includes the lowest topography on Mars, appears to be undergoing net erosion. Dust is removed from the basin. It probably contributes to global dust storms and should leave behind a coarse lag. The particle size distributions and particularly the rock or boulder populations in this lag might be useful for distinguishing between processes which formed the lithologic units that comprise Hellas Planitia. This report concludes that the abundance of rock particles larger than coarse sand is very low. Although this hypothesis awaits confirmation from forthcoming spacecraft data, the origins for Hellas floor deposits favored by this study are indurated volcanic airfall or ancient loess, lacustrine deposits, and some types of volcanic mud flows. The conclusions of this study tend to disfavor such geologic processes as blocky lava flows, glacial deposits (e,g., moraines), or boulder-laden catastrophic flood outwash.

Moore, Jeffrey M.↗

NASA NTRS1992

The composition of Martian aeolian sands: Thermal emissivity from Viking IRTM observations

Aeolian sands provide excellent surfaces for the remote determination of the mineralogic composition of Martian materials, because such deposits consist of relatively well-sorted, uniform particle sizes and might consist of chemically unaltered, primary mineral grains derived from bedrock. Dark features on the floors of Martian craters are controlled by aeolian processes and many consist largely of unconsolidated, windblown sand. Measurement of the thermal emissivity of geologic materials provides a way to identify mid-infrared absorption bands, the strength and positions of which vary with mineral structure and composition. The Viking Infrared Thermal Mapper (IRTM) had four surface-sensing mid-IR bands, three of which, the 7, 9, and 11 micron channels, correspond to absorption features characteristic of carbonates, sialic, and mafic minerals, respectively. In this study, the highest quality IRTM data were constrained so as to avoid the effects of atmospheric dust, clouds, surface frosts, and particle size variations (the latter using data obtained between 7 and 9 H, and they were selected for dark intracrater features such that only data taken directly from the dark feature were used, so as to avoid thermal contributions from adjacent but unrelated materials. Three-point emissivity spectra of Martian dart intracrater features were compared with laboratory emission spectra of minerals and terrestrial aeolian sands convolved using the IRTM response function to the four IRTM spectral channels.

Edgett, Kenneth S.↗

NASA NTRS1992

The Tharsis Montes, Mars - Comparison of volcanic and modified landforms

The three Tharsis Montes shield volcanos, Arsia Mons, Pavonis Mons, and Ascraeus Mons, have broad similarities that have been recognized since the Mariner 9 reconnaissance in 1972. Upon closer examination the volcanos are seen to have significant differences that are due to individual volcanic histories. All three volcanos exhibit the following characteristics: gentle (less than 5 deg) flank slopes, entrants in the northwestern and southeastern flanks that were the source for lavas extending away from each shield, summit caldera(s), and enigmatic lobe-shaped features extending over the plains to the west of each volcano. The three volcanos display different degrees of circumferential graben and trough development in the summit regions, complexity of preserved caldera collapse events, secondary summit-region volcanic construction, and erosion on the lower western flanks due to mass wasting and the processes that formed the large lobe-shaped features. All three lobe-shaped features start at elevations of 10 to 11 km and terminate at 6 km. The complex morphology of the lobe deposits appear to involve some form of catastrophic mass movement followed by effusive and perhaps pyroclastic volcanism.

Zimbelman, James R.↗

NASA NTRS1991

The particle size of Martian aeolian dunes

The effective particle size of unconsolidated materials on the Martian surface can be determined from thermal inertia, due to a pore size dependence of thermal conductivity at Martian atmospheric pressures. Because dunes consist of a narrow range of well-sorted, unconsolidated particles, they provide for a test of the relationship between particle size and thermal inertia calculated from midinfrared emission data for the Martian surface. Two independent approaches are used. First, thermal inertia data indicate that Martian dunes have an average particle size of about 500 +/-100 microns, or medium to coarse sand. Second, expected dune particle sizes are determined from grain trajectory calculations and the particle size transition from suspension to saltation. On earth, the transition occurs for a grain when the ratio of the terminal fall velocity to the wind friction speed, u*(t) is near unity; for grains at u*(t) this occurs at about 52 microns. Terrrestrial dune sands have a mean of 250 microns and are composed entirely of grains greater than 52 microns. The corresponding Martian transition grain size is about 210 microns, suggesting that Martian dunes should be significantly coarser than terrestrial dunes. Grain saltation path length as a function of particle size also shows that, under Martian conditions, larger grains than on earth will become suspended. Both approaches indicate that Martian dune sand should be coarser than terrestrial dune sand. These results closely match the grain sizes determined from thermal inertia models, providing the first direct test of the validity of these models for actual Martian surface materials.

Edgett, Kenneth S.↗