Search NASA⌕ Search

Engineering topics

Eedugurala, Naresh

Publications and source records attributed to Eedugurala, Naresh.

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Ultrasensitive Room Temperature Infrared Photodetection Using a Narrow Bandgap Conjugated Polymer

Abstract Photodetectors operating across the short‐, mid‐, and long‐wave infrared (SWIR–LWIR, λ = 1–14 µm) underpin modern science, technology, and society in profound ways. Narrow bandgap semiconductors that form the basis for these devices require complex manufacturing, high costs, cooling, and lack compatibility with silicon electronics, attributes that remain prohibitive for their widespread usage and the development of emerging technologies. Here, a photoconductive detector, fabricated using a solution‐processed narrow bandgap conjugated polymer is demonstrated that enables charge carrier generation in the infrared and ultrasensitive SWIR–LWIR photodetection at room temperature. Devices demonstrate an ultralow electronic noise that enables outstanding performance from a simple, monolithic device enabling a high detectivity ( D *, the figure of merit for detector sensitivity) >2.44 × 10 9 Jones (cm Hz 1/2 W −1 ) using the ultralow flux of a blackbody that mirrors the background emission of objects. These attributes, ease of fabrication, low dark current characteristics, and highly sensitive operation overcome major limitations inherent within modern narrow–bandgap semiconductors, demonstrate practical utility, and suggest that uncooled detectivities superior to many inorganic devices can be achieved at high operating temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Magnetic Ordering in a High‐Spin Donor–Acceptor Conjugated Polymer

Abstract The development of open‐shell organic molecules that magnetically order at room temperature,which can be practically applied, remains a grand challenge in chemistry, physics, and materials science. Despite the exploration of vast chemical space, design paradigms for organic paramagnetic centers generally result in unpaired electron spins that are unstable or isotropic. Here, a high‐spin conjugated polymer is demonstrated, which is composed of alternating cyclopentadithiophene and benzo[1,2‐ c ;4,5‐ c ′]bis[1,2,5]thiadiazole heterocycles, in which macromolecular structure and topology coalesce to promote the spin center generation and intermolecular exchange coupling. Electron paramagnetic resonance (EPR) spectroscopy is consistent with spatially localized spins, while magnetic susceptibility measurements show clear anisotropic spin ordering and exchange interactions that persist at room temperature. The application of long‐range π‐correlations for spin center generation promotes remarkable stability. This work offers a fundamentally new approach to the implementation of this long‐sought‐after physical phenomenon within organic materials and the integration of manifold properties within emerging technologies.

Steelman, Michael E.↗
DOE OSTI2022

Reversible Ligand Protonation in Noninnocent Constrained-Geometry-Like Group 4 Complexes

The proligands C 5 H 5 CMe 2 CHPhOx R (R = Me 2 , CHMe 2 , and CMe 3 ) react with M(NMe 2 ) 4 (M = Ti, Zr, and Hf) to give monodeprotonated (Ox R CHPhCMe 2 C 5 H 4 )M(NMe 2 ) 3 , doubly deprotonated (C 5 H 4 CMe 2 CPhOx R )M(NMe 2 ) 2 , or a mixture of both. The observed products depend on reaction conditions, the oxazoline substituent, and the metal center, with 4-t-butyl-oxazoline or Ti giving only the monodeprotonated (Ox R CHPhCMe 2 C 5 H 4 )M(NMe 2 ) 3 . Amine elimination from (Ox R CHPhCMe 2 C 5 H 4 )M(NMe 2 ) 3 to give (C 5 H 4 CMe 2 CPhOx R )M(NMe 2 ) 2 is reversible for 4,4-dimethyl- and 4-isopropyl-oxazoline-based ligands in Zr or Hf complexes. Temperature-dependent kinetic studies of the equilibration of (C 5 H 4 CMe 2 CPhOx Me2 )Zr(NMe 2 ) 2 , HNMe 2 and (Ox Me2 CHPhCMe 2 C 5 H 4 )Zr(NMe 2 ) 3 provide the experimental thermodynamic parameters ΔS° = -17.4 ± 2.6 cal·mol –1 K –1 and ΔH° = -6.8 ± 0.8 kcal·mol –1 . An Eyring plot of the rate constants, determined from the system as it approaches equilibrium, gives the activation entropy and activation enthalpy for the addition of (C 5 H 4 CMe 2 CPhOx Me2 )Zr(NMe 2 ) 2 and HNMe 2 as -36 ± 4 cal·mol –1 K –1 and 8.9 ± 1.3 kcal·mol –1 , respectively; the elimination of HNMe 2 from (Ox Me2 CHPhCMe 2 C 5 H 4 )Zr(NMe 2 ) 3 is characterized by ΔS ‡ = -19 ± 5 cal·mol –1 K –1 and ΔH ‡ = 15.7 ± 1.5 kcal·mol –1 . DFT computational models indicate a single-step, nonlinear transfer of the H between the benzylic position of the noninnocent, oxazoline-coordinated ligand and NMe 2 . Computations also confirm the negative activation entropy and the trends in the barriers support the experimental results. Together, these studies indicate the importance of steric effects from the oxazoline ligand, metal center, ancillary ligands, and leaving group on the shuttling of the proton between HNMe 2 and the noninnocent ligand. Finally, these effects suggest that coordination of oxazoline to the metal center is a key part of the benzylic deprotonation and noninnocent behavior of the cyclopentadienyl-oxazoline ligand.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Topology and ground state control in open-shell donor-acceptor conjugated polymers

Donor-acceptor (DA) conjugated polymers (CPs) with narrow bandgaps and open-shell (diradical) character represent an emerging class of materials whose rich behavior emanates from their collective electronic properties and diminished electron pairing. However, the structural and electronic heterogeneities that define these materials complicate bandgap control at low energies and connections linking topology, exchange interactions, and (opto)electronic functionality remain nascent. To address these challenges, we demonstrate structurally rigid and strongly π-conjugated copolymers comprised of a solubilizing thiadiazoloquinoxaline acceptor and cyclopenta[2,1-b:3,4-b']dithiophene or dithieno[3,2-b:2',3'-d]thiophene donors. Atom-specific substitution modulates local aromatic character within the donor resulting in dramatic differences in structural, physicochemical, electronic, and magnetic properties of the polymers. These long-range π-mediated interactions facilitate control between low-spin aromatic and high-spin quinoidal forms. This work provides a strategy to understand the evolution of the electronic structure within DA CPs, control the ground state spin multiplicity, tune spin-spin interactions, and articulate the emergence of their novel properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Synthesis and Characterization of Tris(oxazolinyl)borato Copper(II) and Copper(I) Complexes

The reaction of To M Tl (To M =tris(4,4-dimethyl-2-oxazolinyl)phenylborate) and CuBr 2 in benzene at 60 °C provides To M CuBr (1) as an entry-point into tris(oxazolinyl)phenylborato copper chemistry. In this work, To M CuO t Bu (2) and To M CuOAc (3) are prepared by the reactions of To M CuBr with KO t Bu and NaOAc, respectively. To M CuO t Bu is transformed into (To M CuOH) 2 (4) through hydrolysis. NMR, FT-IR, and EPR spectroscopies are used to determine the electronic and structural properties of these copper(II) compounds, and the solid-state structures were characterized by X-ray crystallography. Reduction of copper is observed upon treatment of To M CuO t Bu with phenylsilane in an attempt to synthesize monomeric copper(II) hydride. To M Cu (5) and To M 2 Cu (6) were independently synthesized and characterized for comparison.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Gold‐Catalyzed C−H Functionalization Polycondensation for the Synthesis of Aromatic Polymers

Abstract Homogeneous gold (Au) complexes have demonstrated tremendous utility in modern organic chemistry; however, their application for the synthesis of polymers remains rare. Herein, we demonstrate the first catalytic application of Au complexes toward the polycondensation of alkyne‐containing comonomers and heteroarene nucleophiles. Polymerization occurs through successive intermolecular hydroarylation reactions to produce high molecular weight aromatic copolymers with 1,1‐disubstituted alkene backbone linkages. Clear correlations between the rate and degree of polymerization (DP) were established based on catalyst structure and counterion pairing, thus enabling polymerization reactions that proceeded with remarkable efficiency, high reactivity, and exceptional DPs. The reactivity is broad in scope, enabling the copolymerization of highly functionalized aromatic and aliphatic monomers. These results highlight the untapped utility of Au catalysis in providing access to new macromolecular constructs.

King, Eric R.↗
DOE OSTI2020

Gold–Catalyzed C–H Functionalization Polycondensation for the Synthesis of Aromatic Polymers

Homogeneous gold (Au) complexes have demonstrated tremendous utility in modern organic chemistry; however, their application for the synthesis of polymers remains rare. Herein, we demonstrate the first catalytic application of Au complexes toward the polycondensation of alkyne-containing comonomers and heteroarene nucleophiles. Polymerization occurs through successive intermolecular hydroarylation reactions to produce high molecular weight aromatic copolymers with 1,1-disubstituted alkene backbone linkages. Clear correlations between the rate and degree of polymerization (DP) were established based on catalyst structure and counterion pairing, thus enabling polymerization reactions that proceeded with remarkable efficiency, high reactivity, and exceptional DPs. The reactivity is broad in scope, enabling the copolymerization of highly functionalized aromatic and aliphatic monomers. Furthermore, these results highlight the untapped utility of Au catalysis in providing access to new macromolecular constructs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Open-Shell Donor–Acceptor Conjugated Polymers with High Electrical Conductivity

Conductive polymers largely derive their electronic functionality from chemical doping, processes by which redox and charge-transfer reactions form mobile carriers. While decades of research have demonstrated fundamentally new technologies that merge the unique functionality of these materials with the chemical versatility of macromolecules, doping and the resultant material properties are not ideal for many applications. Here, it is demonstrated that open-shell conjugated polymers comprised of alternating cyclopentadithiophene and thiadiazoloquinoxaline units can achieve high electrical conductivities in their native “undoped” form. Spectroscopic, electrochemical, electron paramagnetic resonance, and magnetic susceptibility measurements demonstrate that this donor–acceptor architecture promotes very narrow bandgaps, strong electronic correlations, high-spin ground states, and long-range π-delocalization. A comparative study of structural variants and processing methodologies demonstrates that the conductivity can be tuned up to 8.18 S cm -1 . This exceeds other neutral narrow bandgap conjugated polymers, many doped polymers, radical conductors, and is comparable to commercial grades of poly(styrene-sulfonate)-doped poly(3,4-ethylenedioxythiophene). X-ray and morphological studies trace the high conductivity to rigid backbone conformations emanating from strong π-interactions and long-range ordered structures formed through self-organization that lead to a network of delocalized open-shell sites in electronic communication. The results offer a new platform for the transport of charge in molecular systems.

36 MATERIALS SCIENCE↗