Oxidative Electrochemical Coupling Between Bi and Mn in Rechargeable Alkaline MnO2 Cathodes
Explore the source record for details and available documents.
36 MATERIALS SCIENCE↗
Engineering topics
Ehrlich, Steven N.
Publications and source records attributed to Ehrlich, Steven N..
Parasitic structure defect blights sustainability of cobalt-free single crystalline cathodes
Abstract Recent efforts to reduce battery costs and enhance sustainability have focused on eliminating Cobalt (Co) from cathode materials. While Co-free designs have shown notable success in polycrystalline cathodes, their impact on single crystalline (SC) cathodes remains less understood due to the significantly extended lithium diffusion pathways and the higher-temperature synthesis involved. Here, we reveal that removing Co from SC cathodes is structurally and electrochemically unfavorable, exhibiting unusual voltage fade behavior. Using multiscale diffraction and imaging techniques, we identify lithium-rich nanodomains (LRNDs) as a heterogeneous phase within the layered structure of Co-free SC cathodes. These LRNDs act as critical tipping points, inducing significant chemo-mechanical lattice strain and irreversible structural degradation, which exacerbates the voltage and capacity loss in electrochemical performance. Our findings highlight the considerable challenges of developing Co-free SC cathodes compared to polycrystalline ones and emphasize the need for new strategies to balance the interplay between cost, sustainability, and performance.
36 MATERIALS SCIENCE↗
Impact of Synthetic Parameters on Structure and Electrochemistry of High-Entropy Layered Oxide LiNi 0.2 Co 0.2 Mn 0.2 Al 0.2 Fe 0.2 O 2
Here, this study explored a high-entropy layered oxide (HELO), LiNi 0.2 Co 0.2 Mn 0.2 Al 0.2 Fe 0.2 O 2 , prepared by coprecipitation followed by heat treatment. Coprecipitation yielded a kinetically favored product, and the subsequent heat treatment under various temperatures and times allowed tuning the material toward more thermodynamically favored structures. Refinement of X-ray powder diffraction (XRD) revealed that after 450 °C treatment, ~12% of the Ni 2+ in the structure was located within the lithium cation layer. After heat treatment at 600, 700, and 800 °C, there was a continued decrease of Ni 2+ in the lithium cation layer to 9.3, 6.3, and 3.7%, respectively. Longer heat treatment times at 800 °C decreased the level to 2.5%. Electrochemical behavior was evaluated by cyclic voltammetry, galvanostatic cycling, rate capability testing, and electrochemical impedance spectroscopy, where increased loaded voltage, functional capacity, rate capability, and decreased impedance were observed for samples treated at higher temperatures with lower cation mixing. X-ray absorption near edge spectroscopy (XANES) data indicated that the redox activity of Ni and Co was dominant in the electrochemistry, while the participation of Mn or Fe was minimal. The level of Ni oxidation state change between charge and discharge related to the heat treatment temperature where the samples with high cation mixing showed lower capacity consistent with some Ni 3+ in the transition metal layer inaccessible for electron transfer. Longer heat treatment times at 800 °C did not continue to provide a benefit in electrochemical function even with some additional reduction in cation mixing.
25 ENERGY STORAGE↗
Zeolite-promoted platinum catalyst for efficient reduction of nitrogen oxides with hydrogen
Internal combustion engine fueled by carbon-free hydrogen (H 2 -ICE) offers a promising alternative for sustainable transportation. Herein, we report a facile and universal strategy through the physical mixing of Pt catalyst with zeolites to significantly improve the catalytic performance in the selective catalytic reduction of nitrogen oxides (NO x ) with H 2 (H 2 -SCR), a process aiming at NO x removal from H 2 -ICE. Via the physical mixing of Pt/TiO 2 with Y zeolite (Pt/TiO 2 + Y), a remarkable enhancement of NO x reduction activity and N 2 selectivity was simultaneously achieved. The incorporation of Y zeolite effectively captured the in-situ generated water, fostering a water-rich environment surrounding the Pt active sites. This environment weakened the NO adsorption while concurrently promoting the H 2 activation, leading to the strikingly elevated H 2 -SCR activity and N 2 selectivity on Pt/TiO 2 + Y catalyst. This study provides a unique, easy and sustainable physical mixing approach to achieve proficient heterogeneous catalysis for environmental applications.
36 MATERIALS SCIENCE↗
Electrochemistry Beyond Solutions: Modeling Particle Self-Crowding of Nanoparticle Suspensions
Not Available
25 ENERGY STORAGE↗
Manganese-rich high entropy oxides for lithium-ion batteries:materials design approaches to address voltage fade
Lithium- and manganese-rich oxides are of interest as lithium-ion battery cathode materials as Mn is earth abundant, low cost, and can deliver high capacity. Herein, a high entropy strategy was used to prepare Mn rich high entropy oxide (HEO) materials by including four additional metals (Ni, Co, Fe and Al) in the compositions using a mild co-precipitation method. Two HEOs (Li x Ni 0.1 Mn 0.6 Co 0.1 Al 0.1 Fe 0.1 O y , where x = 1.5 for HEO-L and x = 0.5 for HEO-H) with layered and spinel-layered hybrid structures were investigated where the morphology, elemental composition, structure, atomic level phase distribution, and electrochemistry were determined. The HEO-L samples involve a Li 2 TMO 3 layered structure with ~39% stacking faults. HEO-H is a hybrid structure comprised of 80 wt% spinel and 20 wt% LiMO 2 layered structure. The high entropy manganese-rich HEO-L showed higher capacity and 93% retention of the average voltage after 100 cycles while HEO-H showed higher capacity retention and near 100% average voltage retention. Finally, operando X-ray absorption spectroscopy revealed that the Ni, Co, and Mn are redox active in both materials while the Fe center remains at the Fe 3+ oxidation state throughout cycling, where the changes in the oxidation states for both materials during discharge were consistent with the delivered electrochemical capacity rationalizing the observed electrochemistry.
25 ENERGY STORAGE↗
Structural dynamics of PtSn/SiO 2 for propane dehydrogenation
Operando characterization reveals the structural dynamics of PtSn/SiO 2 catalysts, hinting at a Pt-rich surface configuration for optimal propane dehydrogenation performance.
36 MATERIALS SCIENCE↗
Identifying point defects and ordering in the high-entropy layered oxide Li 1.5 MO 3-δ (M=Mn, Al, Fe, Co, Ni) for energy storage applications
High-entropy layered oxides (HELOs) represent a very promising class of next-generation battery cathodes, combining the well-studied properties of layered cathode materials such as LiCoO 2 with the chemical tunability and stability of high-entropy materials. HELO materials often form particles with complex defects and domain structures, complicating accurate characterization of structure and cation mixing. Understanding disorder and order in HELO materials is necessary for understanding their performance and utility as cathodes. Here we demonstrate the characterization of the HELO Li 1.5 MO 3-δ (M = Mn, Al, Fe, Co, Ni), wherein X-ray powder diffraction, transmission electron microscopy imaging, and electron diffraction patterns are analyzed to reveal the presence of ordering in the HELO, with imaging and diffraction simulation employed to compare experimental results to atomic modeling. Finally, without rigorous characterization at the atomic scale, important features such as defect ordering can be easily overlooked and therefore remain unconsidered when interpreting experimental results.
36 MATERIALS SCIENCE↗
Enhancing the Carbon Monoxide Oxidation Performance through Surface Defect Enrichment of Ceria-Based Supports for Platinum Catalyst
Effective synthesis and application of single-atom catalysts on supports lacking enough defects remain a significant challenge in environmental catalysis. Herein, we present a universal defect-enrichment strategy to increase the surface defects of CeO 2 -based supports through H 2 reduction pretreatment. The Pt catalysts supported by defective CeO 2 -based supports, including CeO 2 , CeZrO x , and CeO 2 /Al 2 O 3 (CA), exhibit much higher Pt dispersion and CO oxidation activity upon reduction activation compared to their counterpart catalysts without defect enrichment. Specifically, Pt is present as embedded single atoms on the CA support with enriched surface defects (CA-HD) based on which the highly active catalyst showing embedded Pt clusters (Pt C ) with the bottom layer of Pt atoms substituting the Ce cations in the CeO 2 surface lattice can be obtained through reduction activation. Embedded PtC can better facilitate CO adsorption and promote O 2 activation at Pt C –CeO 2 interfaces, thereby contributing to the superior low-temperature CO oxidation activity of the Pt/CA-HD catalyst after activation.
36 MATERIALS SCIENCE↗
Defect-Driven Configurational Entropy in the High-Entropy Oxide Li 1.5 MO 3-δ
Layered lithiated oxides are promising materials for next generation Li-ion battery cathode materials; however, instability during cycling results in poor performance over time compared to the high capacities theoretically possible with these materials. Here, in this paper, we report the characterizations of a Li 1.47 Mn 0.57 Al 0.13 Fe 0.095 Co 0.105 Ni 0.095 O 2.49 high-entropy layered oxide (HELO) with the Li 2 MO 3 structure where M = Mn, Al, Fe, Co, and Ni. Using electron microscopy and X-ray spectroscopy, we identify a homogeneous Li 2 MO 3 structure stabilized by the entropic contribution of oxygen vacancies. This defect-driven entropy would not be attainable in the LiMO 2 structure sometimes observed in similar materials as a secondary phase owing to the presence of fewer O sites and a 3+ oxidation state for the metal site; instead, a Li 2-γ MO 3-δ is produced. Beyond Li 2 MO 3 , this defect-driven entropy approach to stabilizing novel compositions and phases can be applied to a wide array of future cathode materials including spinel and rock salt structures.
25 ENERGY STORAGE↗
Unrecoverable lattice rotation governs structural degradation of single-crystalline cathodes
Transitioning from polycrystalline to single-crystalline nickel-rich cathodes has garnered considerable attention in both academia and industry, driven by advantages of high tap density and enhanced mechanical properties. However, cathodes with high nickel content (>70%) suffer from substantial capacity degradation, which poses a challenge to their commercial viability. Here, leveraging multiscale spatial resolution diffraction and imaging techniques, we observe that lattice rotations occur universally in single-crystalline cathodes and play a pivotal role in the structure degradation. These lattice rotations prove unrecoverable and govern the accumulation of adverse lattice distortions over repeated cycles, contributing to structural and mechanical degradation and fast capacity fade. These findings bridge the previous knowledge gap that exists in the mechanistic link between fast performance failure and atomic-scale structure degradation.
36 MATERIALS SCIENCE↗
Revealing the Nature of Binary-Phase on Structural Stability of Sodium Layered Oxide Cathodes
The emergence of layered sodium transition metal oxides featuring a multiphase structure presents a promising approach for cathode materials in sodium-ion batteries, showcasing notably improved energy storage capacity. However, the advancement of cathodes with multiphase structures faces obstacles due to the limited understanding of the integrated structural effects. Herein, the integrated structural effects by an in-depth structure-chemistry analysis in the developed layered cathode system Na x Cu 0.1 Co 0.1 Ni 0.25 Mn 0.4 Ti 0.15 O 2 with purposely designed P2/O3 phase integration, are comprehended. The results affirm that integrated phase ratio plays a pivotal role in electrochemical/structural stability, particularly at high voltage and with the incorporation of anionic redox. In contrast to previous reports advocating solely for the enhanced electrochemical performance in biphasic structures, it is demonstrated that an inappropriate composite structure is more destructive than a single-phase design. The in situ X-ray diffraction results, coupled with density functional theory computations further confirm that the biphasic structure with P2:O3 = 4:6 shows suppressed irreversible phase transition at high desodiated states and thus exhibits optimized electrochemical performance. Finally, these fundamental discoveries provide clues to the design of high-performance layered oxide cathodes for next-generation SIBs.
36 MATERIALS SCIENCE↗
Ru/MgO catalyst with dual Ru structure sites for efficient CO production from CO 2 hydrogenation
The development and comprehension of supported metal catalysts for CO 2 hydrogenation is of paramount importance in mitigating the net CO 2 emissions. Supported Ru catalysts have been widely recognized in facilitating CO 2 methanation, on which recent findings suggest that the CO 2 hydrogenation process can be manipulated to favor the reverse water–gas shift (RWGS) pathway by precisely adjusting the size of Ru particles. However, the size-dependent impact of Ru remains a topic of lively debate. In this work, Ru/MgO catalysts with Ru in the form of single atoms (Ru 1 ) and few-atom cluster (Ru FAC ) structures were prepared for CO 2 hydrogenation. The 1.0Ru/MgO catalyst (with 1 wt.% of Ru), featuring a mixture of Ru 1 and Ru FAC with a size of 0.6–1.0 nm, showed the highest CO yield (38% at 500 °C) with balanced CO 2 conversion and CO selectivity. Transient CO 2 hydrogenation and temperature-programmed surface reaction (TPSR) studies suggested that the adsorbed CO 2 species participated in CO 2 hydrogenation. On Ru 1 sites, CO 2 hydrogenation followed the RWGS pathway, resulting in the production of CO. In contrast, on Ru FAC sites, the enhanced H 2 dissociation ability, along with the presence of adsorbed bidentate and monodentate carbonate species at the Ru-MgO interfaces, facilitated the formation of CH 4 through the CO 2 methanation pathway. In conclusion, this study highlights the critical roles of Ru structure and local environment in defining the CO 2 hydrogenation pathways and provides new design principles for highly active Ru-based catalysts.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
In Situ Insights into Cathode Calcination for Predictive Synthesis: Kinetic Crystallization of LiNiO 2 from Hydroxides
Abstract Calcination is a solid‐state synthesis process widely deployed in battery cathode manufacturing. However, its inherent complexity associated with elusive intermediates hinders the predictive synthesis of high‐performance cathode materials. Here, correlative in situ X‐ray absorption/scattering spectroscopy is used to investigate the calcination of nickel‐based cathodes, focusing specifically on the archetypal LiNiO 2 from Ni(OH) 2 . Combining in situ observation with data‐driven analysis reveals concurrent lithiation and dehydration of Ni(OH) 2 and consequently, the low‐temperature crystallization of layered LiNiO 2 alongside lithiated rocksalts. Following early nucleation, LiNiO 2 undergoes sluggish crystallization and structural ordering while depleting rocksalts; ultimately, it turns into a structurally‐ordered layered phase upon full lithiation but remains small in size. Subsequent high‐temperature sintering induces rapid crystal growth, accompanied by undesired delithiation and structural degradation. These observations are further corroborated by mesoscale modeling, emphasizing that, even though calcination is thermally driven and favors transformation towards thermodynamically equilibrium phases, the actual phase propagation and crystallization can be kinetically tuned via lithiation, providing freedom for structural and morphological control during cathode calcination.
36 MATERIALS SCIENCE↗
Size and Structure Effects of Carbon-Supported Ruthenium Nanoparticles on Waste Polypropylene Hydrogenolysis Activity, Selectivity, and Product Microstructure
Hydrogenolysis of plastic waste using Ru-based catalysts is promising for deconstructing polyolefins into lower molecular weight products. Yet, the effect of catalyst atomic structure and size on activity and product selectivity is poorly understood. Herein, we expose the effect of metal particle size and atomic structure on isotactic-polypropylene (i-PP) hydrogenolysis over Ru supported on carbon. Despite similar molecular weight distributions of solid and liquid products, their physical properties are distinct due to different chain regio-irregular CH3 sequences of steric pentads containing racemo configurations. We propose that i-PP hydrogenolysis entails an interplay of C–C bond scission and stereoisomerization. The active site’s local electronic environment and structure dictate the former, whereas polymer–catalyst surface interactions creating suitable polymer conformations control the latter. C–C scission and stereoisomerization are structure-sensitive. Small, disordered nanoclusters are effective in C–C bond scission, whereas larger metal nanoparticles promote stereoisomerization. Finally, we hypothesize that a heterogeneous distribution of metal active sites is essential for deconstruction and product (lubricant base oil) quality control.
36 MATERIALS SCIENCE↗
Pd-CeO 2 catalyst facilely derived from one-pot generated Pd@Ce-BTC for low temperature CO oxidation
Due to the capacity to offer abundant catalytic sites within porous solids featuring high surface areas, metal-organic frameworks (MOFs) and their derivatives have garnered considerable attention as prospective catalysts in environmental catalysis. Here, to promote the industrial application of MOFs, there is an urgent need for an effective and environmental-friendly preparation approach. Breaking through the limitation of the traditional two-step preparation method that Pd was introduced to the already prepared Ce-BTC (Pd/Ce-BTC, BTC = 1, 3, 5 benzenetricarboxylate), in this work, we present a novel one-pot solvothermal method for synthesizing the Pd material supported by Ce-BTC (Pd@Ce-BTC). After pyrolysis in N 2 flow or air flow, Pd-CeO 2 catalysts derived from Pd@Ce-BTC exhibited much higher CO oxidation activity than those from Pd/Ce-BTC. Moreover, Pd/Ce-BTC and Pd@Ce-BTC pyrolyzed in N 2 flow (Pd/Ce-BTC-N and Pd@Ce-BTC-N) could better catalyze the oxidation of CO than Pd/Ce-BTC and Pd@Ce-BTC pyrolyzed in air flow (Pd/Ce-BTC-A and Pd@Ce-BTC-A). Further characterizations revealed that the abundant surface Ce 3+ species, rich surface adsorbed oxygen species and superior redox properties were the main reasons for the superior CO oxidation activity of Pd@Ce-BTC-N.
36 MATERIALS SCIENCE↗
Cobalt-free composite-structured cathodes with lithium-stoichiometry control for sustainable lithium-ion batteries
Abstract Lithium-ion batteries play a crucial role in decarbonizing transportation and power grids, but their reliance on high-cost, earth-scarce cobalt in the commonly employed high-energy layered Li(NiMnCo)O 2 cathodes raises supply-chain and sustainability concerns. Despite numerous attempts to address this challenge, eliminating Co from Li(NiMnCo)O 2 remains elusive, as doing so detrimentally affects its layering and cycling stability. Here, we report on the rational stoichiometry control in synthesizing Li-deficient composite-structured LiNi 0.95 Mn 0.05 O 2 , comprising intergrown layered and rocksalt phases, which outperforms traditional layered counterparts. Through multiscale-correlated experimental characterization and computational modeling on the calcination process, we unveil the role of Li-deficiency in suppressing the rocksalt-to-layered phase transformation and crystal growth, leading to small-sized composites with the desired low anisotropic lattice expansion/contraction during charging and discharging. As a consequence, Li-deficient LiNi 0.95 Mn 0.05 O 2 delivers 90% first-cycle Coulombic efficiency, 90% capacity retention, and close-to-zero voltage fade for 100 deep cycles, showing its potential as a Co-free cathode for sustainable Li-ion batteries.
36 MATERIALS SCIENCE↗