Engineering topics

Eichler, Peter

Publications and source records attributed to Eichler, Peter.

3 records

NASA NTRS1997

NASA/JSC orbital debris models

The orbital debris models developed within the framework of the NASA Johnson Space Center's (JSC's) orbital debris program, are categorized as environment definition and risk assessment models. The EVOLVE, CHAIN and the orbital debris engineering model 1996 (ORDEM96) computer programs determine the past, present and future orbital particulate environment, while the BUMPER and debris assessment software (DAS) computer programs provide a means for evaluating the risks of specific space missions. These models are presented. To support these models and to conduct specialized analyses, NASA/JSC employs a range of auxiliary models, including explosion and collision satellite breakup models, hypervelocity impact ballistic limit models, orbit propagation and decay models, space traffic models and solid rocket motor effluent models.

Johnson, Nicholas↗

NASA NTRS1997

The historical contribution of solid rocket motors to the one centimeter debris population

The measured small particle population in earth orbit contains cm-sized objects that are not accounted for by breakup fragments. It was proposed that slag ejection during solid rocket motor burn is a contributor to this population. The direct evidence for such slag ejection follows from: observations of the exhausts of vehicles in flight, and engineering data from static firings. A source model is presented to account for the contribution of slag expulsion from solid rocket motors to the debris population. The mass and velocity distribution of the slag effluents are taken into account and used as a source term in the debris environment model. The model is based on the available observation data and on models for slag development and ejection.

Jackson, Albert↗

NASA NTRS1997

An overview of revised NASA safety standard 1740.14

Following a broad review of the debris control guidelines outside of NASA and according to additional feedback on the guidelines from within NASA, revisions were made to the NASA safety standard 1740.14. The NASA policy to limit the generation of orbital debris on NASA missions, stated in the NASA management instruction 1700.8 and implemented in the form of the NASA safety standard (NSS) 1740.14 is described together with the revisions implemented. The overall direction of the guidelines is the same, but the details of many of the guidelines were changed, including: changes for tether programs and for the control of operational debris. The NASA will continue to review the guidelines as new measurements and improved models of the environment are obtained.

Reynolds, Robert↗