Search NASA⌕ Search

Engineering topics

Elangovan, S.

Publications and source records attributed to Elangovan, S..

Lightweight Solid Oxide Cell Design for Ammonia-fed SOFC Systems

A lightweight solid oxide fuel cell (SOFC) was developed by OxEon Energy that demonstrates the potential for increased specific power (kW/g) suitable for the requirements of electric Vertical Take-off and Landing (eVTOL) applications. Fuel flexibility was demonstrated in button cells and stacks using both legacy electrolyte-supported SOFC structure and the lightweight structure. Button cell and stack performance was nearly identical among hydrogen, ammonia, and reformed natural gas. Durability testing shows similarly stable performance in each fuel. A button cell test in ammonia at 800 °C using the lightweight cell structure measured area specific resistance (ASR) of 0.25 Ω-cm2 in H2/N2 and NH3 fuel feeds and showed a peak power density of 0.98 W/ cm2 in NH3 fuel. Short term hold at 0.7 V showed stable performance.

Pike, Jenna↗

Conversion of Shale Gas to Value-added Chemicals

OxEon Energy evaluated a catalytic process to directly convert methane to ethylene at high conversion and selectivity. The process uses a dual catalyst reactor where the first catalyst activates methane to produce active radicals which are combined over the second catalyst to form ethylene.

04 OIL SHALES AND TAR SANDS↗

Novel Electro-Deoxygenation Process for Bio-oil Upgrading

Biomass is a potential source of renewable fuel. Bio-oil produced by fast pyrolysis is a prospective option to replace fossil fuels for transportation. However, bio-oil needs to be upgraded to remove its high oxygen and water content, and acidity to produce useful fuels. The upgrading of bio-oil is generally accomplished by hydrodeoxygenation (HDO) using hydrogen. The instability of bio-oil poses a major challenge in transportation to central upgrading facility. An electro-deoxygenation (EDOx) process was evaluated to fully or partially deoxygenate bio-oil using solid oxide electrolysis process. This device uses an oxygen ion conducting membrane which under an applied electric potential removes oxygen in the form of an ion and transports it to the opposite side of the membrane where it is released as oxygen molecule. When water is present in the bio-oil vapor, the process generates in situ hydrogen to facilitate deoxygenation over the electrode that functions as catalyst.

09 BIOMASS FUELS↗

Electrochemical Upgrading of Bio-Oil

Bio-oil produced by fast pyrolysis of biomass is a potential source of low carbon, renewable hydrocarbon fuel. However, the properties such as low heating value, incomplete volatility, acidity, instability, and incompatibility with standard fuels restrict its use. The undesirable properties of pyrolysis oil result from its chemical composition that mostly consists of different classes of oxygenated organic compounds. Current process of Hydrodeoxygenation to remove oxygen involves high-temperature, high-pressure processing in the presence of hydrogen and catalyst. An alternative process of deoxygenation of bio-oil using solid-state, oxygen conductor based electrochemical cell is under investigation. The electrolysis process removes oxygen from the oxygenated organic molecule as well from steam to produce hydrogen in-situ allowing for a distributed, small scale integrated upgrading unit. Mixtures of model compounds and a slip stream of pyrolysis vapor were tested. The results show the potential for integrating a pyrolyzer and an electrochemical device for stabilizing pyrolysis oil.

bio-oil hydrotreating catalyst, Electrolysis, biom↗

Plasma-catalyzed fuel reformer

A reformer is disclosed that includes a plasma zone to receive a pre-heated mixture of reactants and ionize the reactants by applying an electrical potential thereto. A first thermally conductive surface surrounds the plasma zone and is configured to transfer heat from an external heat source into the plasma zone. The reformer further includes a reaction zone to chemically transform the ionized reactants into synthesis gas comprising hydrogen and carbon monoxide. A second thermally conductive surface surrounds the reaction zone and is configured to transfer heat from the external heat source into the reaction zone. The first thermally conductive surface and second thermally conductive surface are both directly exposed to the external heat source. A corresponding method and system are also disclosed and claimed herein.

30 DIRECT ENERGY CONVERSION↗

Efficient reversible electrodes for solid oxide electrolyzer cells

An electrolyzer cell is disclosed which includes a cathode to reduce an oxygen-containing molecule, such as H2O, CO.sub.2, or a combination thereof, to produce an oxygen ion and a fuel molecule, such as H.sub.2, CO, or a combination thereof. An electrolyte is coupled to the cathode to transport the oxygen ion to an anode. The anode is coupled to the electrolyte to receive the oxygen ion and produce oxygen gas therewith. In one embodiment, the anode may be fabricated to include an electron-conducting phase having a perovskite crystalline structure or structure similar thereto. This perovskite may have a chemical formula of substantially (Pr(.sub.1-x)La.sub.x)(z-y)A&#x27;.sub.yBO(3-.differential.), wherein 0<x<1, 0.ltoreq.y.ltoreq.0.5, and 0.8.ltoreq.z.ltoreq.1.1. In another embodiment, the cathode includes an electron-conducting phase that contains nickel oxide intermixed with magnesium oxide.

42 ENGINEERING↗