Engineering topics

Elizabeth F. Rieken

Publications and source records attributed to Elizabeth F. Rieken.

4 records

NASA NTRSDate not supplied

CFD Validation Study of a Hypersonic Cone-Slice-Flap Configuration

Model validation is the process of determining the degree of accuracy between the real world and the model. The result of model validation can either be used to improve the model through calibration or quantify the model-form uncertainty. This work focuses on providing the model-form uncertainty through an area metric for a hypersonic cone-slice-flap geometry configuration given uncertainty in both the simulation and experimental data. A procedure will be presented that can give an accurate representation of the model-form uncertainty using a small number of high-fidelity runs. The work will also assess the impact between using different high-fidelity solvers and different turbulence models.The goal of performing this comparison is to provide a quantifiable measurement for the accuracy of each solver and turbulence model for this type of design. A low-fidelity analysis will also be performed to get a model-form uncertainty for the lower fidelity analysis. The two high-fidelty CFD solvers used are VULCAN-CFD and FUN3D and the low-fidelity results will come from Cart3D. The experimental data came from the 20-inch Mach 6Tunnel located at NASA Langley Research Center.

Laura M. White↗

NASA NTRSDate not supplied

Force and Moment Analysis for the High Reynolds Number Wind Tunnel Test of the Space Launch System at Ascent Conditions

A high Reynolds number test of the Space Launch System was performed at the NASA Langley National Transonic Facility (NTF). The objective of the test was to use the cryogenic testing capabilities of the NTF to acquire data over the largest range of Reynolds numbers possible with a specific focus on the Reynolds numbers closest to flight conditions. The test was performed at Mach numbers from 0.50 to 0.95, which corresponds to the ascent portion of flight for the SLS vehicle. Force and moment data showed that pitching and yawing moment were sensitive to Reynolds number effects over the full range of Mach and Reynolds numbers tested. Axial force also showed sensitivity to Reynolds number with the largest differences seen between Mach 0.50 to 0.90. Surface pressure data showed the highest sensitivity to Reynolds number in the vicinity of the solid rocket booster forward attach region.

Space Launch System↗

NASA NTRSDate not supplied

CFD Validation Study of a Hypersonic Cone-Slice-Flap Variable Geometry Configuration

Model validation is the process of determining the degree of accuracy between physical reality and the model. The result of model validation can either be used to improve the model through calibration or quantify the model-form uncertainty. This work focuses on providing the model-form uncertainty through an area metric for a hypersonic cone-slice-flap variable geometry configuration given uncertainty in both the simulation and experimental data. The research here compares two different turbulence models for the simulations. For a variable geometry, performing uncertainty quantification to capture the model-form uncertainty on every configuration is computationally challenging. This work lays out a procedure that can give an accurate representation of the model-form uncertainty using a small number of high-fidelity runs and many low-fidelity runs on multiple configurations. Running this comparison provides a quantifiable measurement for the accuracy of each turbulence model for this type of design. The high-fidelity CFD solver used was VULCAN-CFD and the low-fidelity results came from Cart3D. The experimental data came from the 20-Inch Mach 6 Tunnel located at NASA Langley Research Center. The present work showed that the using both the Spalart and Allamaras and Menter Shear-Stress Transport turbulence models overpredicted the drag and lift coefficient, while underpredicting the pitching moment coefficient. The model-form uncertainty estimate resulted in up to a 13.6% change in the total uncertainty for the drag coefficient, up to a 57.4% change in total uncertainty for the lift coefficient, and up to a 100% change in total uncertainty for the pitching moment coefficient.

Laura M. White↗

NASA NTRSDate not supplied

Approaching Complex Societal Problems Tied to Aviation

From climate change to health inequity, humankind faces complex societal challenges that aviation can both exacerbate and help to alleviate. In this paper we describe our approach to identifying and approaching complex societal challenges with existing or potential ties to aviation as part of the NASA Convergent Aeronautics Solutions (CAS) project. We detail three example challenges that we have done preliminary work on: enabling access to healthcare, supporting resilient rural communities, and ensuring supply chain wellness. Our approach to understanding and addressing such challenges involves iterative human-centered, systems-oriented, and futures-based design. We provide a discussion of cross-cutting characteristics of complex societal challenges that appear fruitful for aviation to address and detail the lessons we have learned thus far in approaching such challenges.

Elizabeth F. Rieken↗