Ex situ bismuth doping for efficient CdSeTe thin-film solar cells with open-circuit voltages exceeding 900 mV
We dope CdTe solar cells with Bi after the device structure is completed using a solution process.
CdTe solar cell↗
Engineering topics
Ellingson, Randall J.
Publications and source records attributed to Ellingson, Randall J..
Evaporated CdSe for Efficient Polycrystalline CdSeTe Thin-Film Solar Cells
Recent progress has shown that alloying cadmium telluride (CdTe) with cadmium selenide (CdSe) to create a CdSexTe1-x (CdSeTe) gradient region can significantly boost the performance of polycrystalline CdSeTe thin-film solar cells. However, improper CdSeTe alloying might introduce problematic band alignment and deleterious voids at the front interface, limiting the benefit maximization of this technique. Here, we show that the CdSe layers deposited by thermal evaporation result in CdSeTe cells with a higher performance than the sputtered CdSe. This is because evaporated CdSe can avoid the formation of voids at the front interface, producing improved front junction quality with suppressed front junction nonradiative recombination. The champion cell using evaporated CdSe demonstrated a power conversion efficiency (PCE) of 19.7%, much higher than 18.1% in the cell using sputtered CdSe.
cadmium selenide↗
Influence of External Conditions on the Black-to-Yellow Phase Transition of CsPbI 3 Based on First-Principles Calculations: Pressure and Moisture
All-inorganic CsPbI 3 perovskite has emerged as a promising candidate for next-generation solar cells. However, owing to the poor structural stability of black phase CsPbI 3 perovskite at room temperature, it spontaneously transforms to the yellow, photoinactive, nonperovskite phase at room temperature, limiting further development of CsPbI 3 perovskite solar cells. Here, to better understand the mechanism driving such undesirable phase transformation, we examine the thermodynamics and kinetics associated with γ-to-δ phase transformation using density functional theory calculation. A solid-state nudged elastic band method was employed to find minimum energy pathways assuming a concerted solid-state phase transformation between these two phases. The gas molecules representing atmospheric (H 2 O, O 2 , and N 2 ) and inert (Ar) ambient environments, as well as applied external pressure, were considered to examine the influence of external conditions on the black-to-yellow phase transition. Our calculation reveals that, with increasing pressure, the thermodynamic driving force for converting the γ-phase to the δ-phase increases, whereas a larger activation energy must be overcome for the phase transition to occur. We also investigate the moisture-induced phase transformation with an H 2 O molecule and its dissociated species (H + /OH – ) and demonstrate that the reaction energy barriers can be significantly lowered in the presence of H 2 O or OH – . On the other hand, other nonpolar species (O 2 , N 2 , and Ar) have a negligible effect on the phase transformation kinetics, while they might reduce the thermodynamic driving force for the phase transformation and suppress the undesirable phase transformation. Our theoretical prediction could support recent observations that the γ-to-δ phase transformation occurs rapidly and catalytically in the presence of moisture, whereas in dry argon and dry oxygen atmospheres, the γ-CsPbI 3 remains stable.
14 SOLAR ENERGY↗
Oxygen Management to Avoid Photo-Inactive Cd(S,Se) for Efficient Cd(Se,Te) Solar Cells
Our previous work has demonstrated that the formation of a penternary cadmium chalcogenide Cd(O,S,Se,Te) region can significantly reduce the front interface recombination in Cd(Se,Te)-based thin-film solar cells. In this work, we have shown that oxygen management during the device fabrication is crucial to form this region. While both the CdS and CdSe layer depositions and the postdeposition CdCl2 treatment should be conducted in the presence of oxygen, the CdTe deposition should be conducted in an oxygen-free atmosphere. Improper oxygen management leads to low device performance due to the formation of a photoinactive Cd(S,Se) region and reduced absorber quality. Additionally, we investigated the carrier transport and collection properties in devices with photoinactive Cd(S,Se) and photoactive Cd(O,S,Se,Te) at the front interface to gain comprehensive understanding of the mechanisms that resulted in improved efficiencies approaching 20%.
CdTe deposition↗
Water-Assisted Lift-Off Process for Flexible CdTe Solar Cells
In recent years, various lift-off methods have been developed to fabricate lightweight and flexible cadmium telluride (CdTe)-based solar cells. In this work, we report flexible cadmium sulfide (CdS)/CdTe solar cells using a water-assisted lift-off approach. Here we demonstrate that an additional cadmium chloride treatment for the CdS film is critical to improve the grain size of CdS and the post-deposited CdTe film and the electron conductivity of the CdS film. As a result, the quality of the CdS/CdTe front junction is significantly improved with reduced nonradiative recombination. Finally, our lightweight and flexible polycrystalline CdTe solar cells demonstrate a champion power conversion efficiency of 12.6%.
14 SOLAR ENERGY↗