Search NASA⌕ Search

Engineering topics

Elliott, Amy

Publications and source records attributed to Elliott, Amy.

32 records · Page 2

Evaluation of Binder Jetting and Chemical Vapor Infiltration as a Production Method for Silicon Carbide Parts for Nuclear Applications

Application of silicon carbide (SiC) is often sought within nuclear energy systems due to its high thermal conductivity, mechanical and environmental stability at elevated temperatures, corrosion resistance, and exceptional displacement damage irradiation tolerance. As such, the transformational challenge reactor (TCR) program is considering its application in its additively manufactured core. SiC may be used as the matrix for the TCR fuel blocks that comprise of TRISO fuel particles embedded inside this material or used as core non-fuel-bearing peripherical structures such as bottom support manifolds. The core peripherical structures serves to support the overall core geometry, direct and guide coolant flow, and also reflect back leaked neutrons into the core. SiC has very low neutron absorption and adequate scattering cross sections that makes it an ideal material for utilization in the TCR core. Like many ceramics, however, SiC is difficult and at times impractical to shape into complex geometries via traditional machining due to its brittleness. Further, large structures comprising nuclear-grade SiC, i.e. highly pure and crystalline, are costly. Additive manufacturing (AM), however, offers the ability to shape materials by adding layer-by-layer rather than subtracting, contributing new possibilities for previously difficult-to-shape materials. Thus, exploring AM as a method to shape SiC offers a highly cost-effective method and is strategic to developing the next generation of components for nuclear reactors. This report outlines an evaluation of binder jet additive manufacturing combined with chemical vapor infiltration (CVI) to produce nearly-dense silicon carbide artifacts in complex geometries suitable for advanced nuclear reactor designs. The focus is placed on the binder jet printing technologies at large scale for nonfuel-bearing structures relevant to the TCR core and other advanced reactors. Among all AM processes, binder jet delivers the highest resolution capability while still maintaining large print sizes, making it the ideal candidate for nuclear component production.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Advancing Liquid Metal Jet Printing

ORNL worked with Vader Systems to investigate their drop-on-demand molten aluminum additive manufacturing system. The investigation involved studying process-property relationships such as speed vs. hardness. Vader produced samples that were characterized by ORNL via CT scanning, hardness mapping, and other techniques.

42 ENGINEERING↗

Binder Jet Additive Multi-Material Manufacturing for the Transformational Challenge Reactor

Additive manufacturing (AM) is a process in which material is deposited in a layer-by-layer fashion, thereby building up a geometry. This contrasts with subtractive manufacturing in which material is removed from bulk feedstock to create a final geometry. Binder jet AM (BJAM) is a specific process in the AM field in which a binder, or glue, is selectively deposited on a bed of spread powder feedstock and cured. Binder is deposited with an inkjet printhead, which allows for high-resolution shaping of the powder layers. Compared with other AM processes, BJAM is fast, efficient, and scalable. Further, BJAM has one of the largest material selections of the powder AM processes as it can process ceramics, plastics, metals, and virtually any powdered material. Thus, the opportunity exists to leverage the versatility and productivity of BJAM to enable multi-material printing, the next generation of AM technology. The aim of this research is the design and manufacture of a purpose-built BJAM machine that can process multiple materials in its normal operation. This binder jet additive multi-material manufacturing (BJAM 3 ) machine will be able to produce parts that have multiple materials intra- and inter-layer. An example of this would be encapsulating metal spheres inside of a ceramic cube or vice versa. This BJAM 3 process adds another step of freedom to designing and manufacturing complex parts. The milestone for this work is to provide details on the technical progress made to date on the development of multi-material binder jetting and to facilitate simultaneous additive manufacturing of at least two different powder feedstocks.

36 MATERIALS SCIENCE↗

Considerations for Application of Additive Manufacturing to Nuclear Reactor Core Components

The following chapter represents the current state of literature on the selected additive manufacturing technologies and was written with an emphasis on quality control and material performance repeatability. Research and standards published by government entities such as the National Institute of Standards and Technology (NIST) and Department of Energy (DOE) have been included where applicable. It is recommended that literature be reviewed, and new knowledge integrated no less frequently than every four years due to the rapid pace of advancements in additive manufacturing and associated industries. AM presents unique challenges in certification for NPP applications such as anisotropic material properties, porosity, underdeveloped process control feedback systems, and reproducibility. This chapter begins with an overview of the selected AM technologies, followed by a systematic review of literature to detail the fabrication process and difficulties with repeatably fabricating fully dense, geometrically accurate components with known material properties.

36 MATERIALS SCIENCE↗

Additive Manufacturing for Designers: A Primer

Additive Manufacturing, also known as AM or 3D printing, is a class of manufacturing processes that create objects by shaping material layer by layer. Having demonstrated the ability to produce miraculously complex geometries, it is broadly claimed that AM will have endless applications as the technology improves. However, underneath the hype surrounding this technology is a world of nuance and constraints as well as highly strategic applications.Additive Manufacturing for Designers: A Primer, written by Dr. Amy Elliott from Oak Ridge National Laboratory and Dr. Cynthia K. Waters from North Carolina A&T State University discusses the topics needed for a holistic understanding of the many micro and macro components of the world of 3D printing.Additive Manufacturing for Designers: A Primer takes the reader on a journey beginning with important aspects of AM part design and process dependence, including resolution and tolerance issues of interest to any manufacturer. It also offers useful insights into how to build especially complex parts and avoid expensive mistakes during and after the manufacturing process is completed.

Elliott, Amy↗

The trends and challenges of fiber reinforced additive manufacturing

In the last few years, utilizing fiber reinforced additive manufacturing (FRAM)-based components in several industries has become quite popular. Compared to conventional AM technologies, FRAM offered complementary solutions to their needs. In general, fibers have been traditionally used in many manufacturing processes for various reasons. However, using conventional methods, there are obstacles in obtaining the desired complex geometries and low setup costs. AM offers possible avoidance of these limitations. Shape complexity, infill density, and manufacturing lead times are no longer barriers. Bridging AM with fiber reinforced materials offers a vast opportunity for lightweight and strong parts. Depending on the affinity, fibers with different structures can be mixed with different matrix materials and, thus, create stronger parts with improved mechanical properties. Process parameters like raster angle, infill speed, layer thickness, and nozzle temperature also strongly impact physical properties of FRAM products and are considered carefully. FRAM-based components are used in many industries such as aerospace, motorsports, and biomedicine, where the weight, strength, and complexity of parts are critical. Hence, numerous industrial companies and research facilities are investigating the implementation and adaptation of FRAM to their requirements. Studies are generally conducted on new materials, new FRAM technologies, the effect of fiber orientations and fraction on the performance of parts, improving the printing parameters, and other subjects. Furthermore, this study reports the current trends and challenges that FRAM is bringing to AM ecosystem.

36 MATERIALS SCIENCE↗

Hypervelocity Impact of Additively Manufactured A356/316L Interpenetrating Phase Composites

We have examined the hypervelocity impact response of targets made from monolithic A356 and 316L, as well as an additively manufactured A356/316L interpenetrating phase composite. 1.9 mm diameter spherical projectiles made from 2017 aluminum were fired at velocities of 5.9-6.1 km/s, allowing for the observation of multiple types of macro- and microstructural damage within each target. The macroscopic cratering damage to the A356/316L composite resembles that of the A356, but observations of both the cross section and the microstructural damage suggest that the A356/316L composite may be more resistant to spalling than A356 shielding with the same areal density.

French, Matthew↗

Additive manufacturing of complex-shaped graded TiC/steel composites

Complex-shaped TiCx ceramic preforms with a gradient of carbon content in the titanium carbide phase (x changes from 0.7 to 0.98) were fabricated for the first time by Binder jet 3D printing technology. The complex-shaped preforms were infiltrated with molten carbon steel (0.7 wt.%C). Thermodynamic considerations showed that carbon could be transferred from titanium carbide to steel and vice versa according to the initial concentration of carbon (activity) in both phases. After infiltration, solidification and slow cooling, a microstructural gradient was obtained throughout the steel matrix from ferrite, in the region where the steel was in contact with titanium carbide of low carbon content (x=0.7), to pearlite, in the region where the steel underwent interactions with stoichiometric titanium carbide (x=0.98). After annealing at 900°C and quenching in oil, a structural gradient in the steel matrix from ferrite to martensite was obtained, resulting in a hardness gradient of 700-1600 HV. The suggested processing approach allows for fabrication of complex-shaped graded composites with the desired property gradient suitable for a wide range of practical applications.

36 MATERIALS SCIENCE↗

The Energy at ORNL

Scientists and engineers at Oak Ridge National Laboratory apply their expertise to the toughest challenges in energy, national security, and scientific discovery. They’re curious, passionate, and motivated, and they explain what drives them in this video from the lab’s annual Awards Night, Nov. 18, 2016.

99 GENERAL AND MISCELLANEOUS↗

Advanced Infusion Techniques with 3-D Printed Tooling

The manufacturing of tooling for large, contoured surfaces for fiber-layup applications requires significant effort to understand the geometry and then to subtractively manufacture the tool. Traditional methods for the auto industry use clay that is hand sculpted. In the marine pleasure craft industry, the exterior of the model is formed from a foam lay-up that is either hand cut or machined to create smooth lines. Engineers and researchers at Oak Ridge National Laboratory s Manufacturing Demonstration Facility (ORNL MDF) collaborated with Magnum Venus Products (MVP) in the development of a process for reproducing legacy whitewater adventure craft via digital scanning and large scale 3-D printed layup molds. The process entailed 3D scanning a legacy canoe form, converting that form to a CAD model, additively manufacturing (3-D Print) the mold tool, and subtractively finishing the mold s transfer surfaces. Future work will include applying a gelcoat to the mold transfer surface and infusing using vacuum assisted resin transfer molding, or VARTM principles, to create a watertight vessel. The outlined steps were performed on a specific canoe geometry found by MVP s principal participant. The intent of utilizing this geometry is to develop an energy efficient and marketable process for replicating complex shapes, specifically focusing on this particular watercraft, and provide a finished product for demonstration to the composites industry. The culminating part produced through this agreement has been slated for public presentation and potential demonstration at the 2016 CAMX (Composites and Advanced Materials eXpo) exposition in Anaheim, CA. Phase I of this collaborative research and development agreement (MDF-15-68) was conducted under CRADA NFE-15-05575 and was initiated on May 7, 2015, with an introduction to the MVP product line, and concluded in March of 2016 with the printing of and processing of a canoe mold. The project partner Magnum Venous Products (MVP) is a small business. Phase II as discussed herein is under consideration by MVP as of this writing. Overall, it is anticipated that developing this process for manufacturing tooling for complex contoured surfaces has applicability to naval and other watercraft as well as bathrooms and large trucks.

42 ENGINEERING↗