Production of Aliphatic-Linked Polycyclic Hydrocarbons during Radical-Driven Particle Formation from Propyne and Propene Pyrolysis
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Engineering topics
Ellison, G. Barney
Publications and source records attributed to Ellison, G. Barney.
Mechanism, thermochemistry, and kinetics of the reversible reactions: C 2 H 3 + H 2 ⇌ C 2 H 4 + H ⇌ C 2 H 5
High-level coupled cluster theory, in conjunction with Active Thermochemical Tables (ATcT) and E,J-resolved master equation calculations, was used in a study of the title reactions, which play an important role in the combustion of hydrocarbons. In the set of radical/radical reactions leading to soot formation in flames, the addition of H-atoms to alkenes is likely a common reaction, triggering the isomerization of complex hydrocarbons to aromatics. The heats of formation of C 2 H 3 , C 2 H 4 , and C 2 H 5 are established to be 301.26 ± 0.30 at 0 K (297.22 ± 0.30 at 298 K), 60.89 ± 0.11 (52.38 ± 0.11), and 131.38 ± 0.22 (120.63 ± 0.22) kJ mol -1 , respectively. The calculated rate constants from first principles agree well with experiments where they are available. Under conditions typical of high temperature combustion – where experimental work is very challenging with a consequent dearth of accurate data –here we provide high-level theoretical results for kinetic modeling.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
A Conical Intersection Influences the Ground State Rearrangement of Fulvene to Benzene
The rearrangement of fulvene to benzene is believed to play an important role in the formation of soot during hydrocarbon combustion. Previous work has identified two possible mechanisms for the rearrangement-a unimolecular path and a hydrogen-atom-assisted, bimolecular path. Computational results to date have suggested that the unimolecular mechanism faces a barrier of about 74 kcal/mol, which makes it unable to compete with the bimolecular mechanism under typical combustion conditions. This computed barrier is about 10 kcal/mol higher than the experimental value, which is an unusually large discrepancy for modern electronic structure theory. In the present work, we have reinvestigated the unimolecular mechanism computationally, and we have found a second transition state that is approximately 10 kcal/mol lower in energy than the previously identified one and, therefore, in excellent agreement with the experimental value. The existence of two transition states for the same rearrangement arises because there is a conical intersection between the two lowest singlet states which occurs in the vicinity of the reaction coordinates. The two possible paths around the cone on the lower adiabatic surface give rise to the two distinct saddle points. The lower barrier for the unimolecular mechanism now makes it competitive with the bimolecular one, according to our calculations. In support of this conclusion, we have reanalyzed some previous experimental results on anisole pyrolysis, which leads to benzene as a significant product and have shown that the unimolecular and bimolecular mechanisms for fulvene ? benzene must be occurring competitively in that system. Finally, we have identified that similar conical intersections arise during the isomerizations of benzofulvene and isobenzofulvene to naphthalene.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Thermal Decompositions of the Lignin Model Compounds: Salicylaldehyde and Catechol
Here, the nascent steps in the pyrolysis of the lignin components salicylaldehyde (o-HOC 6 H 4 CHO) and catechol (o-HOC 6 H 4 OH) were studied in a set of heated microreactors. The microreactors are small (roughly 1 mm ID x 3 cm long); transit times through the reactors are about 100 us. Temperatures in the microreactors can be as high as 1600 K, and pressures are typically a few hundred torr. The products of pyrolysis are identified by a combination of photoionization mass spectrometry, photoelectron photoion concidence mass spectroscopy, and matrix isolation infrared spectroscopy. The main pathway by which salicylaldehyde decomposes is a concerted fragmentation: o-HOC 6 H 4 CHO (+ M) → H 2 + CO + C 5 H 4 -C-O (fulveneketene). At temperatures above 1300 K, fulveneketene loses CO to yield a mixture of HC=C-C=C-CH 3 , HC=C-CH 2 -C=CH, and HC=C-CH-C-CH 2 . These alkynes decompose to a mixture of radicals (HC=C-C=C-CH 2 and HC=C-CH-C=CH) and H atoms. H-atom chain reactions convert salicylaldehyde to phenol: o-HOC 6 H 4 CHO + H → C 6 H 5 OH + CO + H. Catechol has similar chemistry to salicylaldehyde. Electrocyclic fragmentation produces water and fulveneketene: o-HOC 6 H 4 OH (+ M) → H 2 O + C 5 H 4 -C-O. These findings have implications for the pyrolysis of lignin itself.
09 BIOMASS FUELS↗
Active Thermochemical Tables: The Adiabatic Ionization Energy of Hydrogen Peroxide
The adiabatic ionization energy of hydrogen peroxide (HOOH) is investigated, both by means of theoretical calculations and theoretically-assisted reanalysis of previous experimental data. Values obtained by three different approaches: 10.638 ± 0.012 eV (purely theoretical determination), 10.649 ± 0.005 eV (reanalysis of photoelectron spectrum) and 10.645 ± 0.010 eV (reanalysis of photoionization spectrum) are in excellent mutual agreement. Further refinement of the latter two values to account for asymmetry of the rotational profile of the photoionization origin band leads to a reduction of 0.007 ± 0.006 eV, which tends to bring them into even closer alignment with the purely theoretical value. As a result, detailed analysis of this fundamental quantity by the Active Thermochemical Tables (ATcT) approach, using the present results and extant literature, gives a final estimate of 10.641 ± 0.006 eV.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Tabletop Femtosecond VUV Photoionization and PEPICO Detection of Microreactor Pyrolysis Products
Here, we report the combination of tabletop vacuum ultraviolet photoionization with photoion--photoelectron coincidence spectroscopy for sensitive, isomer-specific detection of nascent products from a pyrolysis microreactor. Results on several molecules demonstrate two essential capabilities that are very straightforward to implement: the ability to differentiate isomers, and to distinguish thermal products from dissociative ionization. We derive vacuum ultraviolet light is from a commercial tabletop femtosecond laser system, allowing data to be collected at 10 kHz; this high repetition rate is critical for coincidence techniques. The photoion—photoelectron coincidence spectrometer uses the momentum of the ion to identify dissociative ionization events, and coincidence techniques to provide a photoelectron spectrum specific to each mass, which is used to distinguish different isomers. We also have used this spectrometer to detect the pyrolysis products that result from the thermal cracking of acetaldehyde, cyclohexene, and 2-butanol. The photoion—photoelectron spectrometer can detect and identify organic radicals and reactive intermediates that result from pyrolysis. Direct comparison of laboratory and synchrotron data illustrate the advantages and potential of this approach.
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
Measuring flow profiles in heated miniature reactors with X-ray fluorescence spectroscopy
Not Available
Tranter, Robert S. (ORCID:0000000302253880)↗
The thermal decomposition of the benzyl radical in a heated micro-reactor. II. Pyrolysis of the tropyl radical
Cycloheptatrienyl (tropyl) radical, C{sub 7}H{sub 7}, was cleanly produced in the gas-phase, entrained in He or Ne carrier gas, and subjected to a set of flash-pyrolysis micro-reactors. The pyrolysis products resulting from C{sub 7}H{sub 7} were detected and identified by vacuum ultraviolet photoionization mass spectrometry. Complementary product identification was provided by infrared absorption spectroscopy. Pyrolysis pressures in the micro-reactor were roughly 200 Torr and residence times were approximately 100 μs. Thermal cracking of tropyl radical begins at 1100 K and the products from pyrolysis of C{sub 7}H{sub 7} are only acetylene and cyclopentadienyl radicals. Tropyl radicals do not isomerize to benzyl radicals at reactor temperatures up to 1600 K. Heating samples of either cycloheptatriene or norbornadiene never produced tropyl (C{sub 7}H{sub 7}) radicals but rather only benzyl (C{sub 6}H{sub 5}CH{sub 2}). The thermal decomposition of benzyl radicals has been reconsidered without participation of tropyl radicals. There are at least three distinct pathways for pyrolysis of benzyl radical: the Benson fragmentation, the methyl-phenyl radical, and the bridgehead norbornadienyl radical. These three pathways account for the majority of the products detected following pyrolysis of all of the isotopomers: C{sub 6}H{sub 5}CH{sub 2}, C{sub 6}H{sub 5}CD{sub 2}, C{sub 6}D{sub 5}CH{sub 2}, and C{sub 6}H{sub 5}{sup 13}CH{sub 2}. Analysis of the temperature dependence for the pyrolysis of the isotopic species (C{sub 6}H{sub 5}CD{sub 2}, C{sub 6}D{sub 5}CH{sub 2}, and C{sub 6}H{sub 5}{sup 13}CH{sub 2}) suggests the Benson fragmentation and the norbornadienyl pathways open at reactor temperatures of 1300 K while the methyl-phenyl radical channel becomes active at slightly higher temperatures (1500 K).
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Pyrolysis of the Simplest Carbohydrate, Glycolaldehyde (CHO-CH 2 OH), and Glyoxal in a Heated Microreactor
Both glycolaldehyde and glyoxal were pyrolyzed in a set of flash-pyrolysis microreactors. The pyrolysis products resulting from CHO-CH 2 OH and HCO-CHO were detected and identified by vacuum ultraviolet (VUV) photoionization mass spectrometry. Complementary product identification was provided by argon matrix infrared absorption spectroscopy. Pyrolysis pressures in the microreactor were about 100 Torr, and contact times with the microreactors were roughly 100 μs. At 1200 K, the products of glycolaldehyde pyrolysis are H atoms, CO, CH 2 =O, CH 2 =C=O, and HCO-CHO. Thermal decomposition of HCO-CHO was studied with pulsed 118.2 nm photoionization mass spectrometry and matrix infrared absorption. Under these conditions, glyoxal undergoes pyrolysis to H atoms and CO. Tunable VUV photoionization mass spectrometry provides a lower bound for the ionization energy IE (CHO-CH 2 OH) ≥ 9.95 ± 0.05 eV. The gas-phase heat of formation of glycolaldehyde was established by a sequence of calorimetric experiments. The experimental result is Δ f H 298 (CHO-CH 2 OH) = -75.8 ± 1.3 kcal mol -1 . Fully ab initio , coupled cluster calculations predict Δ f H 0 (CHO-CH 2 OH) of -73.1 ± 0.5 kcal mol -1 and Δ f H 298 (CHO-CH 2 OH) of -76.1 ± 0.5 kcal mol -1 . The coupled-cluster singles doubles and noniterative triples correction calculations also lead to a revision of the geometry of CHO-CH 2 OH. We have found that the O-H bond length differs substantially from earlier experimental estimates, due to unusual zero-point contributions to the moments of inertia.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
An optically accessible pyrolysis microreactor
We report an optically accessible pyrolysis micro-reactor suitable for in situ laser spectroscopic measurements. A radiative heating design allows for completely unobstructed views of the micro-reactor along two axes. The maximum temperature demonstrated here is only 1300 K (as opposed to 1700 K for the usual SiC micro-reactor) because of the melting point of fused silica, but alternative transparent materials will allow for higher temperatures. Laser induced fluorescence measurements on nitric oxide are presented as a proof of principle for spectroscopic characterization of pyrolysis conditions.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Isomerization and Fragmentation of Cyclohexanone in a Heated Micro-Reactor
Here, the thermal decomposition of cyclohexanone (C 6 H 10 =O) has been studied in a set of flash-pyrolysis microreactors. Decomposition of the ketone was observed when dilute samples of C 6 H 10 =O were heated to 1200 K in a continuous flow microreactor. Pyrolysis products were detected and identified by tunable VUV photoionization mass spectroscopy and by photoionization appearance thresholds. Complementary product identification was provided by matrix infrared absorption spectroscopy. Pyrolysis pressures were roughly 100 Torr, and contact times with the microreactors were roughly 100 μs. Thermal cracking of cyclohexanone appeared to result from a variety of competing pathways, all of which open roughly simultaneously. Isomerization of cyclohexanone to the enol, cyclohexen-1-ol (C 6 H 9 OH), is followed by retro-Diels–Alder cleavage to CH 2 =CH 2 and CH 2 =C(OH)–CH=CH 2 . Further isomerization of CH 2 =C(OH)–CH=CH 2 to methyl vinyl ketone (CH 3 CO–CH=CH 2 , MVK) was also observed. Photoionization spectra identified both enols, C 6 H 9 OH and CH 2 =C(OH)–CH=CH 2 , and the ionization threshold of C 6 H 9 OH was measured to be 8.2 ± 0.1 eV. Coupled cluster electronic structure calculations were used to establish the energetics of MVK. The heats of formation of MVK and its enol were calculated to be Δ f H 298 (cis-CH 3 CO–CH=CH 2 ) = -26.1 ± 0.5 kcal mol –1 and Δ f H 298 (s-cis-1-CH 2 =C(OH)–CH=CH 2 ) = -13.7 ± 0.5 kcal mol –1 . The reaction enthalpy Δ rxn H 298 (C 6 H 10 =O → CH 2 =CH 2 + s-cis-1-CH 2 =C(OH)–CH=CH 2 ) is 53 ± 1 kcal mol –1 and Δ rxn H 298 (C 6 H 10 =O → CH 2 =CH 2 + cis-CH 3 CO–CH=CH 2 ) is 41 ± 1 kcal mol –1 . At 1200 K, the products of cyclohexanone pyrolysis were found to be C 6 H 9 OH, CH 2 =C(OH)–CH=CH 2 , MVK, CH 2 CHCH 2 , CO, CH 2 =C=O, CH 3 , CH 2 =C=CH 2 , CH 2 =CH–CH=CH 2 , CH 2 =CHCH 2 CH 3 , CH 2 =CH 2 , and HC≡CH.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗