The effect of sulfur content on weld penetration in austenitic stainless steel orbital tube welds
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Elmer, J W.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Abstract not provided
As the first part of a project to compare new generation, continuous wave, laser welding technology to traditional electron beam welding technology, electron beam welds were made on commercially pure vanadium refractory metal and 21-6-9 austenitic stainless steel. The electron beam welds were made while employing EB diagnostics to fully characterize the beams so that direct comparisons could be made between electron beam and laser beams and the welds that each process produces.
A thermodynamically based method to describe the phase transformations during heating and cooling of martensitic dual-phase steel has been developed, and in situ synchrotron measurements of phase transformations have been undertaken to support the model experimentally. Nucleation routines are governed by a novel implementation of the classical nucleation theory in a general phase-field code. Physically-based expressions for the temperature-dependent interface mobility and the driving forces for transformation have also been constructed. Modelling of martensite was accomplished by assuming a carbon supersaturation of the body-centred-cubic ferrite lattice. The simulations predict kinetic aspects of the austenite formation during heating and ferrite formation upon cooling. Simulations of partial austenitising thermal cycles predicted peak and retained austenite percentages of 38.2% and 6.7%, respectively, while measurements yielded peak and retained austenite percentages of 31.0% and 7.2% ({+-}1%). Simulations of a complete austenitisation thermal cycle predicted the measured complete austenitisation and, upon cooling, a retained austenite percentage of 10.3% while 9.8% ({+-}1%) retained austenite was measured.
Abstract not provided
Over the past century, the principal method for estimating the sequence of microstructural events that produce the final weld microstructure has been postweld microstructure analysis, and it's the interpretation of these microstructures that sets welding metallurgy apart from other related endeavors. In conjunction with heat flow analysis and thermodynamic principles, the postweld microstructural interpretation of grain sizes and shapes, second-phase particles, interphase boundaries, and composition gradients provide the framework for interpreting the events that lead to the final microstructure. However, without direct and confirming evidence of the actual phases that exist during welding, multiple interpretations for microstructural evolution of welds often occur. For this reason, methods for the direct observation of the phases and phase transformations that occur during welding was developed. This paper summarizes the 2007 Adams Lecture titled 'A New Path for Understanding Microstructural Evolution during Welding Using Synchrotron Radiation,' where real-time X-ray diffraction methods were presented as a means for the direct observation of phase transformations during welding.