Search NASA⌕ Search

Engineering topics

Elnabawy, Ahmed O.

Publications and source records attributed to Elnabawy, Ahmed O..

Decomposition Kinetics of H 2 O 2 on Pd Nanocrystals with Different Shapes and Surface Strains

Direct synthesis of hydrogen peroxide (H 2 O 2 ) from H 2 and O 2 on a Pd-based catalyst has emerged as a promising route to replace the energy-consuming, highly inefficient anthraquinone process. However, Pd is also a good catalyst for the decomposition of H 2 O 2 , thereby compromising the selectivity toward the desired product. The coupling between the formation and decomposition reactions makes it difficult to single out the most important parameter that controls the selectivity toward direct synthesis of H 2 O 2 . Herein, support-free monometallic Pd nanocrystals with different shapes and surface strains are used to investigate their impacts on the decomposition kinetics of H 2 O 2 . The kinetics are analyzed by tracking the concentration of the remaining H 2 O 2 using infrared spectroscopy. The data indicates that both surface structure and strain affect the decomposition kinetics of H 2 O 2 , but their impacts are inferior to that caused by Br – , a surface capping agent for the Pd{100} facets. The experimental results are consistent with the trend obtained through density functional theory calculations. Furthermore, this work helps shed light on the development of Pd-based catalysts for the direct synthesis of H 2 O 2 by offering strategies to mitigate the decomposition of the desired product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Trends in Formic Acid Electro-Oxidation on Transition Metals Alloyed with Platinum and Palladium

Direct formic acid fuel cells (DFAFCs) have emerged as a promising power source to meet increased demands for alternative energy sources in the transportation and portable energy storage sectors. Furthermore, these fuel cells utilize formic acid (FA), a nontoxic and carbon-neutral fuel when produced from biomass or via CO 2 reduction. Despite the promise of DFAFCs, the best monometallic catalysts, platinum and palladium, are poisoned by CO through the indirect oxidation pathway and require large overpotentials. By alloying Pt and Pd with other metals, we aim to improve both the activity and selectivity of these catalysts. Here, we present a systematic density functional theory (GGA-PW91) study of FA electro-oxidation (FAO) on the (111) facet of bimetallic Pt (Pt 3 M) or Pd (Pd 3 M) catalysts (M = Au, Ag, Cu, Pt, Pd, Ir, Rh, Ru, or Re) to evaluate the catalytic performance of these surfaces. For each surface, we calculate free energy diagrams and onset potentials of three key reaction mechanisms: direct oxidation of FA via carboxyl (COOH), direct oxidation of FA via formate (HCOO), and the indirect oxidation of FA that first forms CO en route to full oxidation to CO 2 . We then display the trends in the form of phase diagrams that compare the activity of the calculated surfaces against regions of high activity using the free energies of adsorbed CO and OH as descriptors, enabling high-throughput screening and design of improved catalysts, particularly those alloying Pt or Pd with Ir, Ru, or Re.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formic Acid Electrooxidation on Pt or Pd Monolayer on Transition-Metal Single Crystals: A First-Principles Structure Sensitivity Analysis

Here, we present a density functional theory analysis of trends for the electrooxidation of formic acid (FAO) on a single Pt or Pd monolayer supported on the close-packed (111) facet of transition metals (Pt*/M or Pd*/M): Au, Ag, Cu, Pt, Pd, Ir, and Rh, the close-packed (0001) facet of Os, Ru, and Re, and the open (100) facet of Au, Ag, Pt, Pd, Ir, and Rh. We show that the deposition of Pt or Pd pseudomorphic monolayers on these single crystals modifies the electronic structure of the Pt or Pd monolayer. Specifically, we found a direct correlation between the d-band center of the Pt and Pd monolayer and the free energy of adsorbed CO*, the latter being a reactivity descriptor for FAO. Together with the free energy of adsorbed OH* as a second reactivity descriptor, we depict the thermochemistry of the reaction network as phase diagrams showing calculated free energies across regions of rate-determining steps. We found that FAO is structure-sensitive on most surfaces studied. Pt*/Au(111) is predicted to be the most active among all Pt*/M(111/0001) surfaces studied, despite binding CO*, the strongest among the close-packed facets. This is the case because of its superiority in activating water to OH*, thus removing CO* at lower potentials than other surfaces. On similar grounds, Pt*/Pd(100), Pd*/Re(0001), Pd*/Au(111), Pd*/Ag(111), and Pd*/Pt(111) are predicted to show higher FAO activity than the corresponding monometallic Pt and Pd surfaces.

(100) facets↗

Structure sensitivity of ammonia electro-oxidation on transition metal surfaces: A first-principles study

Ammonia electro-oxidation is a promising catalytic reaction for application in alkaline fuel cells. In this paper we study the trends in this reaction on the (1 0 0) facet of eight fcc transition metals: Au, Ag, Cu, Pt, Pd, Ni, Ir, and Rh. We calculate from first-principles (DFT-GGA-PW91) the energetics for two mechanisms: (i) the N + N mechanism and (ii) the Gerischer-Mauerer mechanism. The onset potentials for both mechanisms are provided for both (1 0 0) and (1 1 1) facets. We also calculate the activation energies for the N-N bond-making non-Faradaic events on Cu, Pt, Pd, Ni, Ir, and Rh. We discover that N* – which is considered a poison for Pt(1 1 1) – is a reactive intermediate on Pt(1 0 0), allowing for a facile dimerization to N2 on Pt(1 0 0) at high potentials. We draw similar analyses for the structure sensitivity on the other metals, and we conclude with some general principles to guide catalyst design for this reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Platinum and Palladium Monolayer Electrocatalysts for Formic Acid Oxidation

The direct formic acid fuel cell holds great promise as a next generation portable power source. In this paper we report an experimental study on Pt and Pd monolayer (Pt* and Pd*) atop the close-packed facet of transition metal substrates (denoted Pt*/M or Pd*/M, where M = Pt, Pd, Ir, Au, Rh and Ru) model catalysts for formic acid oxidation (FAO) and demonstrate a promotional effect on Pt*/Au(111) and Pd*/Pt(111) surfaces. Contrary to findings on monometallic surfaces, in situ infrared reflection adsorption spectroscopy collected during formic acid oxidation at potentials anodic of 375 mV reveal that the poisoning reaction intermediate CO is not formed on the monolayer surfaces, suggesting a promotion of the direct mechanisms of FAO at the expense of the indirect mechanism through CO. Our density functional theory calculations on model surfaces with 1:1 stoichiometry for overlayer to support metal atoms for the thermochemistry of the elementary steps defined by adsorbed CO, OH, COOH, and HCOO on the (111) facet of Pt, PtML/Au, Pd, and PdML/Pt largely attribute the promotional effect observed for the monolayer catalysts to easier removal of CO brought about by easier activation of water, relative to the monometallic catalysts. This synergy between experiments and theory brings us closer to a fundamental understanding of FAO electrocatalysts under reaction conditions, paving the way to achieving more active electrocatalysts possibly with less Pt or Pd; a pre-requisite for the mass commercialization of this technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bismuthene for highly efficient carbon dioxide electroreduction reaction

Bismuth (Bi) has been known as a highly efficient electrocatalyst for CO 2 reduction reaction. Stable free-standing two-dimensional Bi monolayer (Bismuthene) structures have been predicted theoretically, but never realized experimentally. Here, we show the first simple large-scale synthesis of free-standing Bismuthene, to our knowledge, and demonstrate its high electrocatalytic efficiency for formate (HCOO - ) formation from CO 2 reduction reaction. The catalytic performance is evident by the high Faradaic efficiency (99% at -580 mV vs. Reversible Hydrogen Electrode (RHE)), small onset overpotential (<90 mV) and high durability (no performance decay after 75 h and annealing at 400 °C). Density functional theory calculations show the structure-sensitivity of the CO2 reduction reaction over Bismuthene and thicker nanosheets, suggesting that selective formation of HCOO - indeed can proceed easily on Bismuthene (111) facet due to the unique compressive strain. This work paves the way for the extensive experimental investigation of Bismuthene in many different fields.

Science & Technology - Other Topics↗