Engineering topics
Ely, Todd
Publications and source records attributed to Ely, Todd.
The Deep Space Atomic Clock: Ushering in a New Paradigm for Radio Navigation and Science
The Deep Space Atomic Clock (DSAC) mission will demonstrate the on-orbit performance of a high-accuracy, high-stability miniaturized mercury ion atomic clock during a year-long experiment in Low Earth Orbit. DSAC's timing error requirement provides the frequency stability necessary to perform deep space navigation based solely on one-way radiometric tracking data. Compared to a two-way tracking paradigm, DSAC-enabled one-way tracking will benefit navigation and radio science by increasing the quantity and quality of tracking data. Additionally, DSAC also enables fully-autonomous onboard navigation useful for time-sensitive situations. The technology behind the mercury ion atomic clock and a DSAC mission overview are presented. Example deep space applications of DSAC, including navigation of a Mars orbiter and Europa flyby gravity science, highlight the benefits of DSAC-enabled one-way Doppler tracking.
Preliminary Design of the Guidance, Navigation, and Control System of the Altair Lunar Lander
Guidance, Navigation, and Control (GN&C) is the measurement and control of spacecraft position, velocity, and attitude in support of mission objectives. This paper provides an overview of a preliminary design of the GN&C system of the Lunar Lander Altair. Key functions performed by the GN&C system in various mission phases will first be described. A set of placeholder GN&C sensors that is needed to support these functions is next described. To meet Crew safety requirements, there must be high degrees of redundancy in the selected sensor configuration. Two sets of thrusters, one on the Ascent Module (AM) and the other on the Descent Module (DM), will be used by the GN&C system. The DM thrusters will be used, among other purposes, to perform course correction burns during the Trans-lunar Coast. The AM thrusters will be used, among other purposes, to perform precise angular and translational controls of the ascent module in order to dock the ascent module with Orion. Navigation is the process of measurement and control of the spacecraft's "state" (both the position and velocity vectors of the spacecraft). Tracking data from the Earth-Based Ground System (tracking antennas) as well as data from onboard optical sensors will be used to estimate the vehicle state. A driving navigation requirement is to land Altair on the Moon with a landing accuracy that is better than 1 km (radial 95%). Preliminary performance of the Altair GN&C design, relative to this and other navigation requirements, will be given. Guidance is the onboard process that uses the estimated state vector, crew inputs, and pre-computed reference trajectories to guide both the rotational and the translational motions of the spacecraft during powered flight phases. Design objectives of reference trajectories for various mission phases vary. For example, the reference trajectory for the descent "approach" phase (the last 3-4 minutes before touchdown) will sacrifice fuel utilization efficiency in order to provide landing site visibility for both the crew and the terrain hazard detection sensor system. One output of Guidance is the steering angle commands sent to the 2 degree-of-freedom (dof) gimbal actuation system of the descent engine. The engine gimbal actuation system is controlled by a Thrust Vector Control algorithm that is designed taking into account the large quantities of sloshing liquids in tanks mounted on Altair. In this early design phase of Altair, the GN&C system is described only briefly in this paper and the emphasis is on the GN&C architecture (that is still evolving). Multiple companion papers will provide details that are related to navigation, optical navigation, guidance, fuel sloshing, rendezvous and docking, machine-pilot interactions, and others. The similarities and differences of GN&C designs for Lunar and Mars landers are briefly compared.
Mars-Approach Navigation Using In Situ Orbiters
A document discusses the continuing development of a navigation system that would enable a spacecraft to approach Mars on a trajectory precise enough to enable the spacecraft to land within 1 km of a specified location on the Martian surface. This degree of accuracy would represent an order-of-magnitude improvement over that now obtained in radiometric tracking by use of the Deep Space Network. The navigation system would be implemented largely in software running in digital processors in the Electra transceiver, the Mars Network s standard radio transceiver, that would be in both the approaching spacecraft and Mars Network orbiter. The Mars Network is an ad hoc constellation of existing and future Mars science orbiters and dedicated telecommunication orbiters that has been established as a communication and navigation infrastructure to support the exploration of Mars. The software would exploit the sensory and data-processing capabilities of the Electra transceivers to gather Doppler-shift and other radiometric tracking data and process those data into trajectories data that would be accurate to within 0.3 km at the point of entry into the Martian atmosphere (as needed to land within 1 km of a target surface location).
Real-Time EDL Navigation Performance Using Spacecraft to Spacecraft Radiometric Data
A two-year task sponsored by NASA's Mars Technology Program's Advanced Entry, Descent and Landing (EDL) work area includes investigation of improvements to EDL navigation by processing spacecraft-to-spacecraft radiometric data. Spacecraft-to- spacecraft navigation will take advantage of the UHF link between two spacecraft (i.e. to an orbiter from an approaching lander for EDL telemetry relay) to build radiometric data, specifically the velocity between the two spacecraft along the radio beam, that are processed to determine position and velocity in real time. The improved onboard state knowledge provided by spacecraft-to-spacecraft navigation will improve the performance of entry guidance by providing a more accurate state estimate and ultimately reduce the landed position error. Work on the final year of this task is reported here.
Stable Satellite Orbits for Global Coverage of the Moon
A document proposes a constellation of spacecraft to be placed in orbit around the Moon to provide navigation and communication services with global coverage required for exploration of the Moon. There would be six spacecraft in inclined elliptical orbits: three in each of two orthogonal orbital planes, suggestive of a linked-chain configuration. The orbits have been chosen to (1) provide 99.999-percent global coverage for ten years and (2) to be stable under perturbation by Earth gravitation and solar-radiation pressure, so that no deterministic firing of thrusters would be needed to maintain the orbits. However, a minor amount of orbit control might be needed to correct for such unmodeled effects as outgassing of the spacecraft.
Lunar Constellation of Frozen Elliptical Inclined Orbits
A document discusses the design of orbits of spacecraft for relaying communications between Earth stations and robotic and human explorers in craters in one of the polar regions on the Moon.
Real-Time EDL Navigation Performance Using Spacecraft to Spacecraft Radiometric Data
A two-year task sponsored by NASA's Mars Technology Program's Advanced Entry, Descent and Landing (EDL) work area includes investigation of improvements to EDL navigation by processing spacecraft-to-spacecraft radiometric data. Spacecraft-to-spacecraft navigation will take advantage of the UHF link between two spacecraft (i.e. to an orbiter from an approaching lander for EDL telemetry relay) to build radiometric data, specifically the velocity between the two spacecraft along the radio beam, that are processed to determine position and velocity in real time. The improved onboard state knowledge provided by spacecraft-to-spacecraft navigation will improve the performance of entry guidance by providing a more accurate state estimate and ultimately reduce the landed position error. A previous paper documented the progress of the first year of this task, including the spacecraft definitions, selection and documentation of the required algorithms and analysis results used to define the algorithm set. The final year of this task is reported here. Topics include modifications to the previously selected algorithm set for implementation, and performance of the implemented algorithms in a stand-alone filter, on an emulator of the target processor and finally on a breadboard processing unit.
Expected EDL navigation performance with spacecraft to spacecraft data
Pinpoint landing (defined for the purpose of this discussion as landing within 1km of a preselected target) is a key Advanced Entry, Descent and Landing (EDL) technology for future Mars landers. Key scientific goals for Mars exploration, such as the search for water and characterization of aqueous process on Mars, the study of mineralogy and weathering of the Martian surface and the search for preserved biosignatures in Martian rocks, requires placing landers at pre-defined locations of greatest scientific interest. The capability to land within 1 km of a pre-defined landing site will improve safety and enable landing within roving range of sites of scientific interest while avoiding hazardous areas. A critical component of the closed-loop guidance, navigation and control (GN&C) system required for pinpoint landing is position and velocity estimation in real time. Spacecraft-to-spacecraft navigation will take advantage of the UHF link between two spacecraft (i.e. to an orbiter from an approaching lander for EDL telemetry relay) to build radiometric data, specifically the velocity between the two spacecraft along the radio beam, that are processed to determine position and velocity in real time. The improved onboard state knowledge provided by spacecraft-to-spacecraft navigation will reduce the landed position error and improve the performance of entry guidance. Results from the first of two years planned for this effort are documented here, including selection and documentation of prototype algorithms that will go forward into flight code along with analysis results used to define the algorithm set.
Expected EDL navigation performance with spacecraft to spacecraft radiometric data
Pinpoint landing (defined for the purpose of this discussion as landing within 1km of a preselected target) is a key Advanced Entry, Descent and Landing (EDL) technology for future Mars landers.
Integrated Network Architecture for Sustained Human and Robotic Exploration
The National Aeronautics and Space Administration (NASA) Exploration Systems Enterprise is planning a series of human and robotic missions to the Earth's moon and to Mars. These missions will require communication and navigation services. This paper1 sets forth presumed requirements for such services and concepts for lunar and Mars telecommunications network architectures to satisfy the presumed requirements. The paper suggests that an inexpensive ground network would suffice for missions to the near-side of the moon. A constellation of three Lunar Telecommunications Orbiters connected to an inexpensive ground network could provide continuous redundant links to a polar lunar base and its vicinity. For human and robotic missions to Mars, a pair of areostationary satellites could provide continuous redundant links between Earth and a mid-latitude Mars base in conjunction with the Deep Space Network augmented by large arrays of 12-m antennas on Earth.
Integrated network architecture for sustained human and robotic exploration
The National Aeronautics and Space Administration (NASA) Exploration Systems Mission Directorate is planning a series of human and robotic missions to the Earth's moon and to Mars. These missions will require telecommunication and navigation services. This paper sets forth presumed requirements for such services and presents strawman lunar and Mars telecommunications network architectures to satisfy the presumed requirements.
Software Searches for Better Spacecraft-Navigation Models
ADAPT is a computer program that searches for better mathematical models for spacecraft navigation. The task of tuning trajectory-determination models for interplanetary navigation is complex, requiring an intensive search of multiple dynamical and nondynamical models that yield trajectory solutions with minimal errors. By automating the search, ADAPT eases the task of human analysts and enables them to consider wider ranges of potential solutions. ADAPT uses genetic algorithms to search a range of relevant parameters in a user-selected design space to arrive at values for those parameters that best fit the measured spacecraft-tracking data. The user s guide for ADAPT reviews the theoretical basis of the program and presents two example applications. One example is that of selecting a solar-radiation model for the Mars Pathfinder (MPF) mission using MPF tracking data and an extended Kalman filter from prior spacecraft-navigation software. The second example is of the use of tracking data from the Stardust spacecraft mission combined with a pseudo-epoch-state batch filter and an empirical small-forces model to find improved impulse models for use during Stardust attitude adjustments.
Mars orbits with daily repeating ground traces
This paper derives orbits at Mars with ground traces that repeat at the same times every solar day (sol). A relay orbiter in such an orbit would pass over insitu probes at the same times every sol, ensuring consistent coverage and simplifying mission design and operations. 42 orbits in five classes are characteried: 14 cicular equatorial prograde orbits; 14 circular equatorial retrograde orbits; 11 circular sun synchrounous orbits; 2 eccentroc equatorial orbits; 1 eccentric critcally inclined orbit. the paper reports on the performance of a relay orbiter in some of the orbits.
Mars orbits with daily repeating ground traces
This paper derives orbits at Mars with ground traces that repeat at the same times every solar day (sol). A relay orbiter in such an orbit would pass over in-situ probes at the same times every sol, ensuring consistent coverage and simplifying mission design and operations. 42 orbits in five dasses are characterized: 14 circular equatorial prograde orbits 14 circular equatorial retrograde orbits 11 circular sun synchronous orbits 2 eccentric equatorial orbits 1 eccentric critically inclined orbit The paper reports on the performance of a relay orbiter in some of the orbits.
Navigation and Mission Analysis Software for the Next Generation of JPL Missions
MONTE (Mission analysis, Operations, and Navigation Toolkit Environment) is a new software system being developed to replace the navigation and trajectory analysis software currently in use at the Jet Propulsion Laboratory (JPL). MONTE will reproduce the existing functionality of the legacy systems and add significant new capabilities for the MONTE users - the mission and navigation analysts in the Navigation and Mission Design Section (Section 312). MONTE will be developed as a single tightly integrated system, in contrast to the multiple disparate software suites currently in use. MONTE is being designed to facilitate a variety of navigation and trajectory tasks in a broad range of contexts, including research and development, analysis and design, and operations.