Search NASA⌕ Search

Engineering topics

Emanuel Grella

Publications and source records attributed to Emanuel Grella.

Parametric Modeling of NTP Engine Performance for a Crewed Mars Mission

Nuclear thermal propulsion (NTP) has been studied extensively for use on a crewed mission to Mars, and NASA and DARPA are partnering in the development and demonstration of an NTP engine as part of the DRACO project. The specific impulse and thrust achieved by an engine in the context of a mission determines the propellant amount required to close the mission and the size of the vehicle required. An NTP engine has a slower start-up/shut-down transient than traditional chemical engines and requires post-firing cooling, and thus the average Isp for a burn is a function of the power ramp-up rate and the duration of the burn. An initial demonstration engine may target a lower Isp than the 900 sec that has been extensively studied by NASA. This paper shows the effect on the mission closure and vehicle sizing of the transient ramp rate performance and of lower than 900 sec specific impulse. Ammonia is considered as an alternate NTP propellant, with mission performance estimated.

NTP↗

Nuclear Space System Analysis and Modelling (NSSAM): A Software Tool to Efficiently Analyze the Design Space of Space Reactor Systems

Space reactors have the potential to play a key role in future NASA exploration activities due to their capability to enable sustainable power and advanced propulsion systems. To enable assessment of the space reactor design space, the nuclear space system analysis and modelling (NSSAM) software was developed by Analytical Mechanics Associates. NSSAM leverages a scalable and extensible software architecture which automates reactor analysis to perform coupled engine-reactor and reactor physics-thermal hydraulics calculations. This allows space reactor systems to be evaluated by a wider number of users with a consistent analysis approach to compare designs. NSSAM has been developed with multiple use cases to tailor the analysis to the level of detail desired by the user and computing resources. This summary overviews the NSSAM architecture and development approach, current capabilities (including design variants and use cases) and analysis approach for reactor and system component models.

nuclear thermal propulsion↗

Hybrid NEP-Chemical Vehicle and Propulsion Technology Study for Crewed Mars Missions

Nuclear Electric Propulsion (NEP) is a suite of technologies with the potential to enable crewed opposition-class missions to Mars. Each subsystem comprising an NEP system has multiple technology options that present tradeoffs in vehicle sizing and technology development risk. Multiple vehicle concepts have been studied in the past and are currently being studied at NASA. Three models have been developed to illustrate the impact of key technology parameters on overall sizing for a crewed Mars transportation vehicle. Vehicle mass required to close the mission as a function of NEP system alpha (kWe/kg) and specific impulse (Isp) is estimated with a detailed trajectory model. A power system mass model estimates alpha as a function of power and radiator mass assumption. A power conversion system thermodynamic model predicts the radiator area required to close a Brayton cycle power conversion system. Combined with the architecture mass required for mission closure, the radiator area and alpha model provide insight into how technology development may impact the mission. Our focus is on parametric sweeps of the whole design space rather than any particular point design. Results from the mission model comparing electric propulsion technology (Hall, Ion, Magnetoplasmadynamic) and both 2039 and 2042 opposition-class mission launch windows are included. The results of the study illustrate the technology parameters that can result in mission closure and illustrate where the architecture is sensitive to variations in technology performance or requirements.

Matthew Duchek↗

Sensitivity of Hybrid NEP-Chemical Vehicle Mass to Assumptions for Crewed Opposition-Class Mars Missions

This research illustrates the impact of different technology choices and their associated performance on overall sizing for a hybrid Nuclear Electric Propulsion (NEP) and chemical crewed Mars transportation vehicle. A set of models for the trajectory and vehicle mass, power system specific mass(α), and power conversion performance enable the analysis. Vehicle mass required to close the mission is calculated as a function of α and specific impulse (Isp) for multiple choices of high-level assumptions including system alpha vs. power scaling and electric thruster type. System alpha is built up and compared for multiple cases of technology assumptions. A Brayton cycle model is used to illustrate the alpha sensitivities to assumptions in cycle design such as peak operating temperature and component performance. The analysis illustrates how technology performance sensitivities affect the alpha and thus vehicle sizing for a range of mission and technology assumptions.

Matthew Duchek↗

Nuclear Electric Propulsion Modular Power Conversion Model

This work builds upon a previously examined single loop power conversion cycle for nuclear electric propulsion systems. The intent of this model is to enable examination of trends within the system and extract system parameters that could be used in a mass model to understand how technology performance may impact overall system mass.Several model upgrades were made since the previous work which included physics-based sizing of the turbomachinery and pressure loss inside the radiator. A higher fidelity and modular fluid property code was also developed to help understand the impact of variable fluid properties more accurately and allow for the analysis of different fluids in the same model. The upgraded model features radiator and reactor loops with separate fluids from the Brayton cycle to understand advantages and disadvantages of using multiple working fluids as well as the capability of simulating off nominal system performance. The latter provides a steppingstone for modeling the transient performance of the power conversion system.

NEP↗

Mass Modeling of NEP Power Conversion Concepts for Human Mars Exploration

The specific mass (mass per unit of electric power output) of an NEP power conversion system is an important metric for the performance and feasibility of a crewed NEP vehicle. This work explores a component level buildup of the specific mass for a crewed NEP vehicle. The buildup is highly parametric and avoids being tied to specific technologies where practical. This allows the specific mass to be calculated for a variety of assumptions and operating conditions and be used to optimize particular design variables or compare different system configurations. The values of specific mass are dependent on assumptions with significant uncertainty; comparison between cases and trends observed in the models are the main goal of the work presented here. To demonstrate the level of insight this type of modeling can provide, the impacts of compressor inlet temperature, turbine inlet temperature, and radiator pressure drop on specific mass are explored. In addition, the specific mass can be used to assess the benefit of separating the radiator and reactor loop from the power conversion cycle.

NEP↗

Brayton Cycle Power Conversion Model for MW-Class Nuclear Electric Propulsion Mars Missions

A Brayton cycle based power conversion system for a nuclear electric propulsion application was modeled in Simulink as part of NASA’s space nuclear program in order to explore the impact of technology assumptions on the power conversion system performance and capabilities. The thermodynamic processes and algorithms within the model are documented, including a higher fidelity reactor model. Assumptions are chosen based on literature and subject matter expert review, and example results and capabilities of the model are shown. The effects of the turbine inlet and compressor inlet temperature on radiator area and thermal efficiency are discussed. For a He-Xe closed Brayton cycle, radiator areas as low as 650 m2/MWe are shown, with corresponding thermal efficiences at roughly 20% for the minimal radiator area solutions.

Brayton↗

Mass Modeling of NEP Power Conversion Concepts for Human Mars Exploration

The specific mass (mass per unit of electric power output) of an NEP power conversion system is an important metric for the performance and feasibility of a crewed NEP vehicle. This work explores a component level buildup of the specific mass for a crewed NEP vehicle. The buildup is highly parametric and avoids being tied to specific technologies where practical. This allows the specific mass to be calculated for a variety of assumptions and operating conditions and be used to optimize particular design variables or compare different system configurations. The values of specific mass are dependent on assumptions with significant uncertainty; comparison between cases and trends observed in the models are the main goal of the work presented here. To demonstrate the level of insight this type of modeling can provide, the impacts of compressor inlet temperature, turbine inlet temperature, and radiator pressure drop on specific mass are explored. In addition, the specific mass can be used to assess the benefit of separating the radiator and reactor loop from the power conversion cycle.

nep↗

Capabilities of Single Launch NTP and Chemical Spacecrafts for Cis-Lunar Tug Missions

Renewed interest in the region between the Earth and the moon suggests that a tug operating between these two destinations will be most likely required in the near future. This report details a parametric spacecraft model which sizes a nuclear thermal propulsion or chemical propulsion spacecraft and compares their payload transport capabilities for missions to the moon. A spacecraft sized to fit in a single launch vehicle is assumed, and six launch vehicles are investigated. Maximum spacecraft payload mass and minimum mission transit time are compared between nuclear and chemical propulsion spacecrafts. For vehicles sized to the maximum capability of a launch vehicle, payloads of at least five metric tons are possible with either propulsion option; with nuclear thermal propulsion able to provide additional mass or reduced transit time when the spacecraft is sized to the maximum capability of the heaviest-lift launch vehicles. Transit times to the moon with a five-ton payload could be reduced by at least 0.2 days with a nuclear propulsion system.

Cis-lunar tug↗

Capabilities of Single Launch NTP and Chemical Spacecrafts for Cis-Lunar Tug Missions

Renewed interest in the region between the Earth and the moon suggests that a tug operating between these two destinations will be most likely required in the near future. This report details a parametric spacecraft model which sizes a nuclear thermal propulsion or chemical propulsion spacecraft and compares their payload transport capabilities for missions to the moon. A spacecraft sized to fit in a single launch vehicle is assumed, and six launch vehicles are investigated. Maximum spacecraft payload mass and minimum mission transit time are compared between nuclear and chemical propulsion spacecrafts. For vehicles sized to the maximum capability of a launch vehicle, payloads of at least five metric tons are possible with either propulsion option; with nuclear thermal propulsion able to provide additional mass or reduced transit time when the spacecraft is sized to the maximum capability of the heaviest-lift launch vehicles. Transit times to the moon with a five-ton payload could be reduced by at least 0.2 days with a nuclear propulsion system.

Cis-lunar tug↗